Fat Bagger 09BRKS User Manual

138 EAST LINCOLN CHARITON, IA 50049
641-774-7499 641-774-7505(FAX) FATBAGGERS.COM
FBI-09BRKS RELOCATION KIT FOR STOCK FENDER
1. REMOVE QUICK RELEASE LATCHES FROM STOCK BACKREST ( SEE IMAGE A )
2. USING A HAMMER AND A 11/16 SOCKET, KNOCK PIN OUT OF BACKREST (SEE IMAGE B)
IMAGE B
3. MOUNT SUPPLIED CHROME PLATES (Left & Right) ON BACKREST (SEE IMAGE C). NOTE: THE SCREW WITH BEVELLED WASHER IS TO FACE TO THE INSIDE OF THE BACKREST.
IMAGE C
4. INSTALL STOCK QUICK RELEASE ONTO SUPPLIED CHROME PLATES (SEE IMAGE D)
IMAGE D
5. REMOVE SADDLEBAGS AND REMOVE STOCK BOLTS FROM SADDLEBAG SUPPORT BRACKET (SEE IMAGE E)
IMAGE E
6. USING BOLTS THAT CAME WITH THE KIT, INSTALL STAINLESS STEEL DOCKING POSTS FROM KIT IN LOCATION OF THE STOCK BOLT THAT WAS JUST REMOVED (SEE IMAGE F)
IMAGE F
7. RE-INSTALL SADDLEBAGS THEN PUT BACKREST INTO PLACE. NOTE: FBI ALSO HAS A REMOVEABLE TRUNK MOUNT TO MOUNT ON OE TOUR PAK TO ALLOW USING THE SAME DOCKING POINTS AS THIS UNIT. CALL FOR INFORMATION.
Loading...