Fastron Parts MT-300 Operation Manual

the time is right.

Installation, Operating and
Programming Instructions

· MT-300 Mixer Timer

128E

Commercial cooking appliances also classified by UL in ac­cordance with NSF Standard No. C-2-1983.

This document contains confiden­tial information. The dissemina­tion, publication, copying, or
duplication of this document
without prior written authorization
is strictly prohibited.

© 2005-2006 Food Automation ­Service Techniques, Inc.

Part Number: 229-51303 Rev. C

24/7 Toll-Free Technical Support

1-800-243-9271

(from the U.S., Canada and the Caribbean)

MT-300

Table of Contents

Introduction

Introduction .......................................................................................................... 2

Timer Key Descriptions/Features .......................................................................... 3

Installing the Mixer Timer ..................................................................................... 4

Operating the Mixer Timer ....................................................................................4

Display Descriptions .............................................................................................5

Programming the Mixer Timer ........................................................................... 5-6

Installation Mounting Template ............................................................................. 7

Customer Support, Warranty and Other Information ............................................11

Thank you for your purchase. In choosing FAST, you have chosen a product with over
30 years of innovation and quality manufacturing behind it. The MT-300 Mixer Timer is
designed to simplify your timing process and allow your foodservice operators to
spend more time with the customers and other important responsibilities. Quality
control of your food product is assured through the various features, notification
displays and alarms designed into the MT-300 Mixer Timer.

There are three modes of operation on the mixer timer:

• Operating Mode: used to time various menu items

• Product Programming Mode: used to add or modify menu items or change
settings

• Diagnostic Mode: used to test LEDs, display and beep volume.

FAST is not liable for any use of product not in accordance with FAST’s
installation and operating instructions.

Page 2

Installation, Operating and Programming Instructions for the MT-300 Mixer Timer — Lit. Part Number: 229-51303 Rev C

24/7 Toll-Free Technical Support: 1-800-243-9271

The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited.

MT-300

TIMER KEY DESCRIPTIONS/FEATURES

1

3

5

2

4

(1) ACROSS-THE-KITCHEN MONITORING: 7-Segment LED Display. Easy-to-read displays allow crew members to

quickly check the status of the mixer from across the kitchen. The display will show the countdown time.

(2) ONE (1) LED PER PRODUCT KEY

(3) PROGRAMMING INSTRUCTIONS: Printed directly on front panel to make it easy for any operator to use the

mixer timer.

(4) UP and DOWN ARROW KEYS: In “Programming” mode increments the time or feature up or down (keys 1 and

4).

(5) PRODUCT KEY: In “Programming” mode used to program mixing times. In “Operating” mode, used to start

timing cycles.

6

(6) CHANGEABLE MENU STRIP: Slides in and out easily allowing quick updates when your menu items change.

Installation, Operating and Programming Instructions for the MT-300 Mixer Timer — Lit. Part Number: 229-51303 Rev C

24/7 Toll-Free Technical Support: 1-800-243-9271

The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited.

Page 3

INSTALLATION

OPERATION

MT-300

1. Using the drawing on page 7 as a guide, mount the MT-300 to an appropriate

vertical surface using screws and mounting holes on unit.

be used in a splash zone.

2. Make sure the mixer and MT-300 power switches are in the OFF position.

3. Plug the MT-300 into a standard three-prong 120VAC (center ground) outlet having

a minimum 15A service.

4. Plug mixer into power receptacle on side of MT-300.

5. To ensure safe operation, arrange power cables so they are away from mixer and

other equipment.

6. Turn mixer power ON.

This timer is intended to

1. Load ingredients into mixer bowl. Use the correct ingredient quantities for your

product.

DO NOT OVERLOAD MIXER BOWL WITH PRODUCT!

2. Turn the MT-300 power switch to ON.

3. Immediately press the appropriate timing button on MT-300. That button’s LED will

be lit.

NOTE: This must be done within 5 seconds to avoid a time-out alarm. If the time­out alarm sounds, turn the MT-300 power switch OFF and repeat Steps 2 and 3.

4. When mixing is done the display will flash 00:00 and beep every half second. Turn

the MT-300 power switch OFF.

5. Empty ingredients form the mixing bowl.

WARNING: TURN MT-300 OFF BEFORE TOUCHING

OPERATING NOTES:

a. A mixing cycle can be programmed up to 99 minutes and 59 seconds.

MIXER!

Page 4

b. TO CANCEL A TIMING CYCLE DURING COUNTDOWN: Turn the MT-300 OFF.

Installation, Operating and Programming Instructions for the MT-300 Mixer Timer — Lit. Part Number: 229-51303 Rev C

24/7 Toll-Free Technical Support: 1-800-243-9271

The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited.