Fastron Parts MET-110, MET-118 Operation Manual
MERIDIAN Series
Cooking Timers
MET-110 (10 Product Keys)
MET-118 (18 Product Keys)
Operating Guide
Toll-Free Technical Support
24 Hours A Day, 365 Days A Year
(from the U.S., Canada and the Caribbean)
1-800-243-9271
This document contains confidential
information. The dissemination, publication,
copying, or duplication of this document or
the software described herein without prior
written authorization is strictly prohibited.
w
w
w
.
f
a
s
t
i
n
c
m
.
o
c
F
-
0
0
8
-
1
the time is right.
N
O
R
T
S
A
$5.00 USD
Notices
(FAST.) is not liable for any use of product not in
accordance with its installation and operating
instructions.
Before using this equipment, or for any questions
on the operation of the appliance, consult and
follow all instructions and safety warnings found in
the appliance operator’s manual supplied from the
manufacturer of the appliance.
Not all features are available on some models.
TIMER OPERATING ENVIRONMENT
The solid state components in this timer are designed
to operate reliably in a temperature range up to
158°F/70°C. Before installing this timer, it should be
verified that the ambient temperature at the mounting
location does not exceed 158°F/70°C.
Installation
Tools Required
– Straight Screwdriver
– Power Drill
– #29 High-Speed Drill Bit
– 10/32 Tap
– Center Punch
– Hammer
1. Turn appliance power OFF.
2. Choose your mounting location.
3. Attach 2 mounting brackets to the controller using
the 2 wing nuts provided. Be sure to put 1 star
washer on each side of the mounting bracket.
4. Hold the computer against your mounting surface.
4. Mark 4 mounting holes.
5. Drill and tap the mounting holes.
6. Secure the timer to the mounting surface using the
4 screws provided.
CLEANING THE TIMER
Using a clean damp cloth, wipe down your controller
daily using a commercial quality foodservice-approved
detergent.
Do not allow oil to build up on any part of the controller.
NEVER use chemical or abrasive cleaners on
your controller. The controller’s overlay may
be damaged.
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
2
Meridian Cooking Timers
www.fastinc.com 1-800-243-9271 229-51325E © 2006-2010 FAST
Operating the (FASTIMER.) Meridian Timer
Programming Codes
Product Programming 1 7 2 4
System Programming 3 2 2 8
Timer Features
1 LARGE LED DISPLAY: 8-character, 14-segment. Displays programming and
cook cycle information.
2 SERVICE WINDOW: Locate the timer’s serial number and tech support phone
number easily.
3 INDICATOR LIGHTS: lit when there’s an active cook cycle and in programming
mode.
4 PRODUCT KEYS: Press to start a cook cycle. Also used in programming.
REPLACEABLE MENU STRIP: Make menu changes quickly and easily.
5 PROGRAMMING CENTER: (FAST.Nav)
TM
—Easy mobile phone-like
programming with predictive text. Access programming mode and change
cooking parameters.
6 FEATURE KEYS: Used to access programming functions and timer features;
keys will vary by model.
7 SCK®LINK: Signifies that your control is communications-capable.
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Meridian Cooking Timers
www.fastinc.com 1-800-243-9271 229-51325E © 2006-2010 FAST
3
Operating the (FASTIMER.) Meridian Timer
Features
Explained
Operating the
Timer
Programmable Action Alarms
Up to three action alarms can be programmed for each product key. An action alarm
alerts the operator to perform some action at a pre-programmed time.
Programmable Hold Time Linking
Each product key can be linked to an independent hold timer, or multiple product keys
can be linked to a single hold timer.
Programmable Hold Times
Product key hold times can be programmed to track product quality through a specified
holding period. The timer will sound an alarm when the product's hold time has expired
alerting the operator to discard the product.
Automatic Least Hold Display
Product with the least amount of hold time remaining will be shown in the display.
Pressing and holding the HOLD key allows you to view each active product’s remaining
hold time.
Start a Cook Cycle
Press any product key to start a cook cycle. If the key is
programmed, the correct cooking time will be displayed
and will immediately start to count down in minutes and
seconds. DONE will display when the cook cycle has ended.
The pressure solenoid will also close if programmed to
do so, or a basket lift will lower if so equipped.
If DONE is displayed immediately and the unit starts to
signal, the product key being pressed is not programmed.
Stop a Cook Cycle
Press and hold an active product key for 3 seconds. Timing
will stop.
Respond to a DONE Alarm
Cancel the signal by pressing the same product key used
to start the cook cycle.
Action Alarms
If the timer is programmed for action alarms, they will
signal at a preset time during the cooking cycle. The
signal, a dual-rhythm beeping, will last 5 seconds and then
self-cancel. The display will flash the action alarm time and
the timer will start counting toward 0:00.
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
4
Meridian Cooking Timers
www.fastinc.com 1-800-243-9271 229-51325E © 2006-2010 FAST
Loading...