Fastora NAS T8 Specifications

NAS – T8
Tower Powerful and Cost-effective Storage Device
The FASTORA NAS-T8 is a NAS (Network Attached Storage) device, which provides a cost-effective solution that minimizes the cost of extra HDD space. The system features 8 HDD drive bays and RAID 0, 1, 5, and 5 with hot spare that helps prevent precious data from being lost, and offers a quick and efficient backup solution. In addition, administrators can monitor hardware status via the LCM (Liquid Crystal Monitor) display , and take any needed action immediately if problems do occur. The FASTORA NAS-T8 provides simple, yet complex reliability, scalability, flexibility, and high performance in the space .
Product Highlights and Benefits
Form Factor Capacity Power Supply Hard Drive Rear Panel Connector
Front Panel Display Front Panel LED
Processor Main Memory IDE Interface Serial Port Ethernet
Compact-Flash Hardware Monitoring Dimensions Weight Operation environment
Storage environment
Tower Design From 0 to 2.0 TB and beyond, depending on hard disk drive capacity Redundant 300W ATX power supplies 8 x Hot-Swap Enhance IDE HDD driver bays 2 x 10/100 Base-T Ethernet LAN port 1 x Gigabit Ethernet LAN port 1 x RS232 COM port 2 x 16 characters LCM support message display 8 x LEDs for HDDs 3 x LEDs for LANs 1 x LED for System 1x LED for Power status 1 x push-button for system reset 1 x push-button for power on/off Intel® Pentium III CPU Architecture ( support up to 1.26GHz ) One PC100/133 SDRAM DIMM ( up to 512MB ) Eight bus mastering ATA 66/100/133 Enhance IDE channels One UART Serial Port Two 10/100 Base-T Ethernet and One Gigabit Ethernet Supporting Fail-over and Trunking One IDE interface CompactFlash
TM
socket for embedded use
Detection for four Fans, and for the CPU thermal temperature monitoring
177.4mm (7")(W) x 448mm (17.6")(H) x307.5mm (12.1")(D) Approx.13.5 kg without hard drive Air temperature: 10ºC –35ºC Humidity: 10% – 95% Air temperature: -20ºC – 65ºC Humidity: 10% – 95%
Hardware Specifications
Ordering Information
NAS-T8 Redundant 300W ATX power supply / PIII 1.13GHz or above / 256MB DIMM / Gigabit
NAS – T8
Reseller Information
PIII 1.13G/133/256K Celeron 1.2G/100/256K
Celeron 1.3G/100/256K
PIII 1.26G/133/512K
Loading...