FastenMaster TrussLOK-Z User Manual

No Predrilling. They Zip right in! Engineered for any multi-ply dimensional wood application.
Correct screw lengths for two-, three- or four-ply girders
• Proper thread length to engage
final ply. Eliminates board jacking while maximizing shear strength
IBC/IRC code compliant. ESR #1078
Approved for single-sided installation
Recognized by MiTek®, Eagle®, CompuTrus® and other leading truss software companies
Prevents gapping between plies which can occur in nailed applications
Works in 11⁄2" truss chords (LVL & LSL)
Great for carrying beams, headers, bracing and other multi-ply wood applications
Hex driver bit included
Photograph should not be used as a reference for fastening patterns.
For more information or free samples, call FastenMaster at 800.518.3569.
INSTALLATION PROCEDuRE
•
Install using a 1⁄2" corded or 18 volt cordless drill.
•
Bring underside of washer-head flush with wood surface. Do not countersink.
•
Choose correct TrussLok-Z length. See below.
•
Always refer to truss manufacturer’s literature for proper fastening pattern, design load information and additional fastener installation requirements.
•
Maintain a minimum distance of 2" from any edge and 4" from end of beam.
PRODuCT FEATuRES
BUILT UP “CHAMFER”
UNDER HEAD FOR ADDED STRENGTH
EPOXY COATED
WITH ANTI-FRICTION
TOP COAT
A design professional should be consulted when making critical connections to ensure the proper number and location of all fasteners meet national and local code requirements.
For complete design values and engineering data, available through ICC-ES, see report ESR #1078 at www.icc-es.org.
For technical assistance or questions regarding proper use of this fastener, please contact FastenMaster Technical Support at 800.518.3569 or visit www.FastenMaster.com.
Quantity
Item #
FMTSZ278-50
FMTSZ412-5
FMTSZ006-50
FMTSZ278-500
FMTSZ412-250
FMTSZ006-250
FMTSZSHEET (0211)
per Box Screw Length Threading
50 27⁄8" 13⁄8" 50 41⁄2" 13⁄8"
50 6" 13⁄8" 500 27⁄8" 13⁄8" 250 41⁄2" 13⁄8" 250 6" 13⁄8"
CORRECT THREAD
LENGTH. DRAWS PLIES
TOGETHER WITHOUT
“BOARD JACKING”
SHARP GIMLET POINT
FOR FAST DRILLING
FASTENMASTER, INC., 153 BOWLES ROAD, AGAWAM, MA 01001
800.518.3569 WWW.FASTENMASTER.COM
FastenMaster® and TrussLok-Z® are trademarks of OMG, Inc. Copyright ©2011 OMG, Inc. All rights reserved.
Loading...