FastenMaster TrussLOK User Manual
No Predrilling. They Zip
right in! Engineered for
multi-ply LVL, LSL and
PSL applications.
Faster and easier
•
than through bolts
•
IBC/IRC code compliant.
ESR #1078
•
Approved for single-sided
installation up to 4 plies
•
Higher side load capacity
with fewer fasteners saves
time and labor
•
Prevents gapping between
plies which can occur
in nailed applications
•
Winged point, modified
thread design and antifriction coating significantly
reduces installation torque
•
Specified by Trus Joist
®
,
Boise®, GP® and other
leading wood manufacturers
•
Hex driver bit included
Photograph should not be used
as a reference for fastening patterns.
For more information or free samples,
call FastenMaster at 800.518.3569.
fastenmaster, 153 BOWLes rOaD, aGaWam, ma 01001 WWW.fastenmaster.COm
INSTALLATION PROCEDURE
SUGGESTED TRUSSLOK APPLICATIONS
13⁄4 13⁄4
33⁄8"
TRUSSLOK
13⁄4 13⁄4 13⁄4
5"
TRUSSLOK
13⁄4 13⁄4 13⁄4 13⁄4
63⁄4"
TRUSSLOK
13⁄4 31⁄2
5"
TRUSSLOK
31⁄2 31⁄2
63⁄4"
TRUSSLOK
13⁄4 13⁄431⁄2
63⁄4"
TRUSSLOK
Install using a
•
Bring underside of washer head flush with wood surface.
•
Do not countersink.
Choose correct TrussLok length. See below.
•
Always refer to engineered wood manufacturer’s literature for proper
•
fastening pattern, design load information and additional fastener
installation requirements.
•
Maintain a minimum distance of 2" from any edge and 4" from
end of beam.
A design professional should be consulted when making critical connections
to ensure the proper number and location of all fasteners meet national and
local code requirements.
For complete design values and engineering data, available through ICC-ES,
see report ESR #1078 at www.icc-es.org.
For technical assistance or questions regarding proper use of this fastener,
please contact FastenMaster Technical Support at 800.518.3569 or visit
www.FastenMaster.com.
1
⁄2" corded or 18 volt cordless drill.
PRODUCT FEATURES
BUILT UP “CHAMFER”
UNDER HEAD FOR
ADDED STRENGTH
EPOXY COATED WITH
ANTI-FRICTION TOP
COAT. CORROSION
RESISTANT WITHOUT
RISK OF HYDROGEN
EMBRITTLEMENT
CORRECT THREAD
LENGTH. DRAWS PLIES
TOGETHER WITHOUT
“BOARD JACKING”
WINGED POINT
REDUCES INSTALLATION
TORQUE AND
ELIMINATES SPLITTING
Item # Quantity per Box Screw Length Threading
FMTSL338-50 50 3
3
⁄8" 1
FMTSL005-50 50 5" 1
FMTSL634-50 50 6
FMTSL338B-250 250 3
3
⁄4" 1
3
⁄8" 11⁄2"
FMTSL005B-250 250 5" 1
FMTSL634B-250 250 6
FMTSLSHEET (0510)
3
⁄4" 1
FASTENMASTER, INC., 153 BOWLES ROAD, AGAWAM, MA 01001
800.518.3569 WWW.FASTENMASTER.COM
FastenMaster® and TrussLok® are trademarks of OMG, Inc. Copyright ©2010 OMG, Inc. All rights reserved.
1
⁄2"
1
⁄2"
1
⁄2"
1
⁄2"
1
⁄2"
Loading...