No part of this publication may be copied, transmitted,
stored in a retrieval system or translated into any language
in any form or by any means without the expressed written
permission of FarStone Technology, Inc.
FarStone grants you the right to use one copy of the
enclosed software program ("SOFTWARE") on a single
computer. If the SOFTWARE is installed on a network, or
more than one user can run the SOFTWARE at the same time,
you must purchase an additional license for each additional
user or computer.
Trademarks
FarStone is a trademark of FarStone Technology, Inc. Rapid
Cache® VirtualDrive
®
, and VirtualDrive® Network are
registered trademarks of FarStone Technology, Inc.
Microsoft®, Windows® and MS-DOS® are registered
trademarks of Microsoft Corporation. Other product names
mentioned in this User’s Guide may be trademarks or
registered trademarks of their respective companies.
FarStone Technology, Inc.
U.S. Headquarters:
15 Hammond Dr., Suite 304
Irvine, CA 92618
Phone: (949) 458-3666
Asia-Pacific Offices
10F-1B, No. 207, DunHua North Rd., Taipei, 105, Taiwan
Phone: 886-2-2546-9898
Fax: 886-2-2546-3838
2
Technical Support:
Please contact your retailer or use our online support system
at www.farstone.com
. For your convenience, you will find
answers to frequently asked questions on our website at
FARSTONE TECHNOLOGY, INC. (FARSTONE) END USER LICENSE
AGREEMENT FOR VIRTUALDRIVE, HEREAFTER REFERRED TO AS
THE "SOFTWARE"
PLEASE READ CAREFULLY: THE USE OF THIS "SOFTWARE" IS
SUBJECT TO THE "SOFTWARE" LICENSE TERMS OF F ARSTONE AND
OTHER LICENSORS WHOSE SOFTWARE MAY BE BUNDLED WITH
THIS PRODUCT.
BY YOUR USE OF THE "SOFTWARE" INCLUDED WITH THIS
PRODUCT YOU AGREE TO THE LICENSE TERMS REQUIRED BY THE
LICENSOR OF THE "SOFTWARE", AS SET FORTH BELOW. IF YOU
DO NOT AGREE TO THE LICENSE TERMS APPLICABLE TO THE
"SOFTWARE", YOU MAY RETURN THE ENTIRE UNUSED PRODUCT
FOR A FULL REFUND.
LICENSE AND WARRANTY:
The software which acc ompanies this license (t he "Software") is the
3
property of FARST ONE or its licensors and is protected by copyright
law. While F ARSTONE continues to own the Software, you will have
certain rights to use the Software after your acceptance of this
license. Except as may be modified by a license addendum which
accompanies this license, your rights and obligations with respect
to the use of this Software are as follows:
A. Single User License:
(a) use the "Software" on a single computer system or network,
and only by a single user at a time. If you wish to use the
"Software" for more users, you will need an additional License for
each user.
(b) make one copy of the "Software" in machine-readable form
solely for back-up purposes, provided you reproduce FarStone's
copyright proprietary legends. Notwithstanding the foregoing, the
"Software" may be used on the home, laptop or other secondary
computer of the principal user of the "Software", and an additional
copy of the "Software" may be made to support such use. As used
in this License, the "Software" is "in use" when it is either loaded
into RAM or installed on a hard disk or other permanent memory
device. The "Software" may be "in use" on only one computer at
any given time. (Different License terms and fees are appl icable
for networked or multiple user applications.) As a specific
condition of this License, you agree to use the "Software" in
compliance with all applicable laws, including copyright laws, and
that you will not copy , tr ansmit, perform or distribute any audio or
other content using the "Software" without obtaining all necessary
Licenses or permissions from the owner of the content.
B. Multiple User License:
4
Make one copy of the "Software" in machine-readable form solely
for back-up purposes, provided you reproduce F arStone's copyright
proprietary legends.
You must acquire and dedicate a License for each separate
computer on which any part or portion of the "Software" is installed
or run As used in this License, the "Software" or any part or portion
of the "Software" is "in use" when it is either loaded into RAM or
installed on a hard disk or other permanent memory device
including any networked or shared environment where either direct
or indirect connections are made through software or hardware
which pools or aggregates connections.
As a specific condition of this License, you agree to use the
"Software" in compliance with all applicable laws, including
copyright laws, and that you will not copy, transmit, perform or
distribute any audio or other content using the "Software" without
obtaining all necessary Licenses or permissions from the owner of
the content.
C. Restrictions: Y ou may not distribute copies of the "Software" to
others or electronically transfer the "Software" from one computer
to another over a network. You may not post or otherwise make
available the "Software", or any portion thereof , in any form, on the
Internet. You may not use the "Software" in a computer service
business, including in time-sharing applications. The "Software"
contains trade secrets and, in order to protect them, you may not
decompile, reverse engineer, disassemble, or otherwise reduce the
"Software" to a human-perceivable form. YOU MAY NOT MODIFY,
ADAPT, TRANSLATE, RENT, LEASE, LOAN, RESELL FOR PROFIT,
DISTRIBUTE, NETWORK OR CREATE DERIVATIVE WORKS BASED
UPON THE "SOFTWARE" OR ANY PART THEREOF.
D. Limited Warranty:
5
Farstone warrants that the media on which the Software is
distributed will be free from defects for a period of fifteen (15) days
from the date of delivery of the Software to you. Your sole remedy
in the event of a breach of this warranty will be that Farstone will, at
its option, replace any defective media returned to Farstone within
the warranty period or refund the money you paid for the Software.
Farstone does not warrant that the Software will meet your
requirements or that operation of the Software will be
uninterrupted or that the Software will be error-free.
THE ABOVE WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL O THER
WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE.
E. Limitation of Liability: IN NO EVENT WILL FARSTONE OR ITS
LICENSORS BE LIABLE TO YOU FOR ANY INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES, INCLUDING ANY LOST
PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF FARSTONE
OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
Some states do not allow the exclusion or limitation of special,
incidental, or consequential damages, so the above limitation or
exclusion may not apply to you.
F. General: You acknowledge that you ha v e read this Agreement,
understand it, and that by using the "Software" you agree to be
bound by its terms and conditions. You further agree that it is the
complete and exclusive statement of the agreement between
6
FarStone and you, and supersedes any proposal or prior agreement,
oral or written, and any other communication between FarStone
and you relating to the subject matter of this Agreement. No
additional or any different terms will be enforceable against
FarStone unless FarStone gives its express consent, including an
express waiver of the terms of this Agreement, in writ ing signed b y
an officer of FarStone. You assume full responsibility for the use of
the "Software" and agree to use the "Software" legally and
responsibly.
Should any provis ion o f th is Agr eeme nt b e dec lare d unen forc eab le
in any jurisdiction, and then such provision shall be deemed
severable from this Agreement and shall not affect the remainder
hereof. FarStone reserves all rights in the “Software” not
specifically granted in this Agreement.
Should you have any questions concerning this Agreement, you
may contact FarStone by writing to:
FarStone Technology, Inc.
Legal Department
15 Hammond Dr., Suite 304
Irvine, CA 92618
7
Contents
Chapter 1 Introduction 11
1.1 What is VirtualDrive? 11
1.2 Features and Benefits 11
Chapter 2 Installation 16
2.1 System Requirements 16
2.2 Installing VirtualDrive 16
2.3 Uninstalling VirtualDriv e 17
Chapter 3 Starting VirtualDrive 20
3.1 Starting VirtualDrive 20
3.2 The VirtualDrive Start Menu 22
Chapter 4 Backing up Data to Discs 27
4.1 Creating Data CD/DVD 27
4.1.1 Creating a New Project 27
4.1.2 Burning a Project to Disc 30
4.2 Backing up Images to Disc 30
4.3 Burning Settings 31
4.3.1 Disabling Auto-run of Disc Drive 31
4.3.2 How to Choose Burning Settings 31
Chapter 5 Multimedia Creation 35
5.1 Creating an Audio CD 35
5.2 Creating an MP3 CD 35
Chapter 6 Working with VirtualDrive 38
6.1 How to make an Image 38
6.1.1 Creating VCDs from the CD Drive 38
6.1.2 Making an Image from a Project 49
6.2 VCD Manager 51
6.2.1 Launching the VCD Manager 52
6.2.2 Adding VCD Files to Run on Your Virtual Drives 53
6.2.3 Using Cabinets to Organize VCDs 55
8
6.2.4 Inserting a VCD 56
6.2.5 Ejecting a VCD 57
6.2.6 VCD Properties 58
6.2.7 Creating a VCD Shortcut 61
6.2.8 Setting a Password for a VCD 61
6.2.9 Extracting Files from VCD 62
6.2.10 Extracting Audio Tracks 62
6.2.11 Searching VCDs 65
6.2.12 Deleting VCD Icons or VCD Files 66
6.2.13 Adding Additional Virtual Drives 67
6.2.14 Changing a Drive Letter 68
6.2.15 Setting Auto-Run for a Drive 68
6.2.16 Backing up the VCD List 68
6.2.17 Changing the VCD Manager View 69
6.2.19 Running VCDs Using Command Line Syntax 71
6.3 Rapid Cache 80
6.3.1 Rapid Cache® Features 80
6.3.2 The Rapid Cache® Settings 81
6.4 Converting between ISO 9660 Image Files and VCD Files 75
Chapter 7 VirtualDrive Utilities 77
7.1 Erase Disc 77
7.2 View the Device Info 78
7.3 Live Update 84
7.4 Renew Subscription 錯誤! 尚未定義書籤。
9
Chapter 1
Introduction
10
Chapter 1 Introduction
1.1 What is VirtualDrive
VirtualDrive
®
is a revolutionary software program that
®
?
emulates the computer’s physical CD/DVD-ROM drive.
You can create an unlimited number of virtual CDs (VCDs)
and up to 23 virtual drives. You no longer need to insert the
actual CD and wait for the disc to load - you simply
double-click the VCD icon. Another great advantage is that
you no longer need to swap discs while playing games that
have multiple CDs. Just pre-load all the VCDs you need and
enjoy.
In addition, the new integrated CD/DVD burning program
allows you to back up, share or archive various files from the
hard disk to a CD/DVD, or burn MP3 files to a recordable CD
that can be played on home stereo equipment.
1.2 Features and Benefits
•Improved copy protection support
VirtualDrive
®
is compatible with StarForce V 1/2/3,
SecuROM *New V5, DVD SecuROM *New , SafeDisc V1/2/3/4
SecuROM, LaserLock and more
• Add VCDs from the Internet
With VirtualDrive
®
, you can add a VCD (*.VCD) that is
shared on the Internet or a LAN into the virtual drive.
• VCD Cabinet
11
Instead of adding VCDs all in one place, the new added
cabinet function allows you to sort your VCDs and put them
into different “cabinets” in VCD Manager.
• Export Audio Tracks
Extract audio tracks from an existing audi o CD , either a real
CD or a virtual CD, and store them as an audio file (*.WAV)
or a MP3 file on the hard disk.
• Supports most CD/DVD formats
VirtualDrive
®
supports the following CD/DVD formats:
CD-ROMs, CD-Extras, CD- T exts, Audio CDs, Mixed Mode CDs,
Photo CDs, Video CDs, DVD-ROMs, Multi-session CDs and
unprotected DVD Videos.
• Customize your own virtual CDs
With VirtualDrive
®
, you can customize your own VCDs with
selected files from a CD or from the hard drive. VCDs you
compiled yourself can be configured to automatically run
when inserted in a virtual drive.
• #1 in CD-ROM Game Support
VirtualDrive
®
supports the newest and most popular games
available today.
• Run Multiple CDs Simultaneously
VirtualDrive
®
allows you to run multiple CDs at the same
time. For example, you can browse the Great Britain
Encyclopedia in a virtual drive while checking new words
from a dictionary in another and enjoying music from a CD in
a physical CD-ROM drive.
12
• Optimized CD performance
VirtualDrive
to a 200x CD drive). And with its advanced caching
technology, VirtualDrive
®
plays the VCDs at hard drive speed (equivalent
®
can reduce CD access time by up
to 75%.
• Fully integrated with Windows
The VirtualDrive
®
XP-style user interface is completely
integrated with Windows Explorer and the Windows
Device Manager. Enable/disable CD auto-run, change CD
drive letters or set your own hot-keys to run CDs.
• ISO 9660 support
VirtualDrive
®
enables you to convert VCDs to and from
ISO 9660 format.
• Create shortcuts for your VCDs
This feature allows users to create desktop shortcuts to
local or network VCDs. Dou ble-clicking on the shortcut
will insert the VCDs into the virtual drive quickly and
easily.
• MP3
If Windows Media Player MP3 subassembly or other MP3
coding/decoding programs are installed on your system,
VirtualDrive
®
allows you to compress audio CDs into MP3
files.
• Easy Management
VirtualDrive
®
converts the entire contents of the CD into a
single VCD file on the hard drive. Disk and file management
are greatly simplified.
13
• Compression
VirtualDrive
®
incorporates a high-performance compression
engine for building VCD files. Compressed VCD files are
automatically decompressed when accessed.
• Command Line Support
You can acc ess VirtualDrive
®
from the command line. With
this feature you can mount VCDs and auto-run applications
or create shortcuts to your VCDs.
• Ideal for Notebook Computers
VirtualDrive
®
eliminates the need to carry CD/DVDs when
you travel.
• Network Capability
Some CD applications only run from a CD drive and will not
run on a mapped network drive. With VirtualDrive, VCDs can
be shared across the network without needing to map
network drives.
• RapidCache
VirtualDrive comes with RapidCache
which utilizes the latest incremental caching techno logy.
RapidCache
®
®
can increase VCD and CD performance.
®
CD caching system,
14
Chapter 2
Installation
15
Chapter 2 Installation
2.1 System Requirements
• Windows 2000/XP-SP2/Server 2003
• CD/DVD drive
• 100 MB of hard disk space
• 128 MB RAM or better
Note: A virtual CD drive does not take any appreciable
amount of hard drive space. However, 19 KB of RAM is
reserved for each
virtual drive when a VCD is inserted.
2.2 Installing VirtualDrive®
Step 1: Close any applications that are running before
starting the
Step 2: Insert the VirtualDrive® CD-ROM disc. The setup
program should start automatically. If the auto-run function
does not work, run the setup.exe file directly. Similarly, if
you are installing from a network or hard drive, double-click
setup.exe to launch the Installer program.
Step 3: Select the language you prefer for the installation.
installation.
16
Step 4: After the Windows installation program has
configured your system, the installation wizard will be
launched.
Step 5: Carefully read the software license agreement. If
you accept the terms of the agreement, select I Accept the
License Agreement, and then click Next to continue.
Step 6: Enter your Serial Number. (If you have purchased
the CD-ROM, the serial number can be found on the back of
the CD jewel case.)
Step 7: The Install Wizard will suggest a folder in which to
install the program files. If you would like to store the
program files in another location, select Change to open the
file browser and select a new folder.
Step 8: Set the number of virtual drives in your system.
(Note: You must select at least one virtual drive to in stall
VirtualDrive
Step 9: Y ou can launch VirtualDrive
®
.) Click Next to start the installation process.
®
Manager and/or place
a shortcut on the desktop after the installation by selecting
the checkboxes. Select Finish to complete the installation.
2.3 Uninstalling VirtualDrive
®
Step 1: Close any other programs that are running.
Step 2: If the VirtualDrive
tray, right-click on the icon and select Exit.
®
icon is displayed in the system
17
Step 3: To uninstall the VirtualDrive® program, select Start
in the Windows taskbar and then select either
Programs/VirtualDrive/ Uninstall VirtualDrive or
Start/Settings/Control Pane and double-click on the
Add or Remove Programs icon to open the Add or Remove
Programs screen. Select VirtualDrive
installed programs, and then select Remove to continue.
Either method will launch the VirtualDrive
®
from the list of
®
Uninstall Wizard.
The uninstall program will remove all files created by
VirtualDrive
®
, except the VCD files (files with the “VCD”
extension). These VCD files can be deleted by using
Windows Explorer.
18
Chapter 3
Starting
®
VirtualDrive
19
Chapter 3 Starting VirtualDrive®
3.1 Starting VirtualDrive
®
After installation, you can launch VirtualDrive® directly
without restarting the computer.
You can launch VirtualDrive
methods:
®
using either of these two
zDouble-click the shortcut icon
on the
desktop;
zSelect Start Æ All Programs Æ VirtualDrive Æ
VCD Manager.
Fig. VirtualDrive
®
Manager Interface
20
The main functions of VirtualDrive® include:
Backup: Allows users to backup, share or archive
various files from the hard disk to a CD/DVD, or back up
disc images to real disc.
Make Data
CD/DVD
Back up or archive your various
files from the hard disk to a
recordable CD/DVD disc such as a
Data DVD, Data CD, Audio CD,
MP3 CD, Mixed-Mode CD, CD
Extra, UDF CD or Multi-Session
CD.
Back up Image Back up and burn an image file
from the hard disk to a recordable
CD/DVD disc.
Multimedia: Allows you to create an audio CD or an
mp3 CD from your collections.
Create an Audio
CD
Create an audio CD from an audio
track from an existing audio CD or
your collection of mp3, wav or
other type of audio files.
Create an MP3
CD
Create an MP3 CD from your MP3
collection.
VirtualDrive: A revolutionary software program that
emulates your computer’s CD/DVD-ROM drive, which
enables you to run CD/DVD programs directly from your
hard drive without the use of the physical CD/DVD-ROM
drive or the actual disc. From this page, you can:
Create VCD Create an image file (a VCD) for a
CD/DVD disc and store it on the
hard disk.
21
VCD Manager Launch VCD Manager and enjoy
the more powerful functions of
VirtualDrive®.
ISO Conversion Convert a VCD image to an ISO
image, and vice versa.
Utilities: Provides tools to erase all data from a
re-writable CD/DVD disc, to display detailed information
of the CD/DVD device and the disc inserted in the device.
From this page, you can:
Erase Disc Erase all data from a re-writable
CD/DVD disc (CD-RW, DVD-RW,
DVD+RW, DVD-RAM).
Device info View detailed information about
your CD/DVD device, including
the CD/DVD recorder and the disc
inserted in the recorder.
RapidCache® Set caching configurations and
view disc and CD/DVD device
properties.
Live Update Click LiveUpdate to check for any
new VirtualDrive updates.
About: Click the Company name on the right bottom of
the Manager interface to view information about
VirtualDrive
3.2 The VirtualDrive
®
and FarStone.
®
Start Menu
22
After launching VirtualDrive®, a VirtualDrive® icon will be
displayed in the
Windows system tray near the clock.
Note: The VirtualDrive
have disabled the VD Task function. To disable
VirtualDrive
®
Task, select View Æ Options Æ
Miscellaneous Settings and clear the “Run VD Task while
launching VCD Manger” box from the VirtualDrive
®
icon will not be displayed if you
®
Manager.
Double-click the icon to launch the VirtualDrive
®
Manager.
Right-click
the system tr ay icon to open the VirtualDrive
®
Start Menu.
The Start Menu provides quick access to the most commonly
used functions of VirtualDrive
®
.
23
With the VirtualDrive® Start Menu, you can perform the
following functions quickly:
VCD Manager: Start the VCD Manager interface. VCD Manager: Launch the VCD Manager. Make Image: Converts the contents of a CD into a VCD
file. Supported media includes CD-ROMs, Audio CDs,
Mixed Mode CDs, Photo CDs, Video CDs, DVD-ROMs
(Data Mode) and Unprotected DVD Videos.
Customize: Converts a selection of files into a VCD file. Insert: Click to select a virtual drive, and then select an
image file (VCD) to insert. (All virtual discs that have
been added in VirtualDrive
®
Manager will be listed for
you to select. Y o u can also choose a VCD from the hard
24
disk by clicking the Open option on the top of the VCD
list.)
Eject: Click to select a virtual drive, the inserted VCD
will then be ejected.
Browse: Click to select a virtual drive, then view the
content of the VCD inserted in this drive through
Windows Explorer.
Drives: Set the number of virtual drives and their drive
letters.
Enter New Serial Number: Click to enter a new serial
number to activate VirtualDrive
available.
Note:
A serial number can only be used on one computer
on a LAN. If a serial number is used to install this
program on a second computer on a LAN, the
installed program will not be available. You can
purchase another serial number and enter it to
activate VirtualDrive
®
.
Exit: Click to exit the VirtualDrive
®
when it is not
®
program.
25
Chapter 4
Baking up Data to
CD/DVD
26
Chapter 4 Backing up Data to Discs
4.1 Creating Data CD/DVD
Click Make Data CD/DVD will launch the CD/DVD Burning
Manager (shown below), where you can create various typ es
of discs such as Audio CD, MP3 CD, Mixed-mode CD, CD
Extra, or UDF CD.
CD/DVD Burning Manager
4.1.1 Creating a New Project
To start creating any kind of disc, you should first create a
project. You can then burn a project onto a CD/DVD disc or
to a VCD.
Shown below is an example of creating a Data CD/DVD.
Starting a New Project
27
To start a new Data CD/DVD project, choose any of the
e
r
e
following options from the CD/DVD Burning Manager:
y Select File Æ New Æ Data CD/Data DVD.
y Click the small triangle on the New button
select Data CD/Data DVD.
yRight-click on any part of the Project Pane, then choose
New Æ Data CD/Data DVD.
Tips:
When you open a multi-session disc in Windows Explor
can see the content of the last session only . With VirtualD
CD/DVD Burning, you can view the content of all s
through CD/DVD Burning manager / Tools / Device
Disc Contents.
Adding Files and Folders to the Project
You can add files and folders from your hard disk and other
storage media to your project by dragging and dropping files
and folders from the Source Pane or from Windows Explorer
to the Current Project Pane.
You ca n preview document, photo, video , and audio files, by
double-clicking the file in the Source Pane or right-click on
the document and select Open. You can also preview an
audio file by right-clicking the file in the Current Project Pane
and selecting Play.
, then
28
Note: The Play option is only available for audio files in an
audio CD project, in the audio session of a Mixed-Mode CD or
in a CD Extra project only.
Working with Files and Folders in the project
You can rename and view properties of a file or folder in your
project.
Note: 1. The project name is different from the name of the
project file (file with CIF extension). The project name will be
used as the CD label when burning the project to a CD/DVD.
2. Deleting a project does not remove the original project file
(file with CIF extension) from your hard disk.
Setting Project Properties
Right-click the project and select Properties to set the
project properties.
General
You can edit the CD Label in the blank area near the top.
(Note: The CD Label is the same as the project name. You
can also edit the CD Label title by renaming the project.)
File System
You can set the file system of the disc to UDF, ISO9660, or
ISO9660+Joliet. You can also edit the volumes, serial
number, CD publisher, CD processor, copyright file, CD
application, summary file, ISBN file, volume create time,
volume modify time, volume end time and volume validate
time.
Advanced
29
Loading...
+ 67 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.