Farenheit Technologies MD-1120CM User Manual

Download

MD-1120CM

11.2 TFT-LCD DVD/SD/USB/ iPOD COMBO MONITOR

PLAY

POWER

OWNER S MANUAL

Contents

Caution

Features and Controls Monitor/DVD Player Remote Control

Power and Mode Selection Releasing The Monitor Turning on The Monitor Mute Function

Selecting an AV mode

Picture Control Contrast/Brightness/Color/FM

DVD Setup Setup Menu General Setup TV Aspect Ratio

Angle Viewing OSD Language Captions Screen Saver

Last Position memory

Audio Setup Speaker Setup Equalizer Settings Preferences Setup TV Type

Parental Audio Subtitle

Default Password Setup Password Mode Password Change

DVD Functions Eject

Vol+/Vol-

Mute

Play or Pause

Audio

Stop

Arrows

Setup

Display

Number Buttons Subtitle

Title

Slow

Fast Reverse Searching

Fast Forward Searching

Repeat A-B

Repeat

NTSC/PAL

Angle

15 15

PBC Zoom

GO to

15 16

SD/USB/iPOD Functions

Connection Diagram

17 17

Installation 17 18

Disc Information 18

Troubleshooting 19

Specifications

19 19

20 20

20 21

21 21

21 22

22 23 23 23 24 24 25 25

25 26 26

26 27 27 27

Caution

Please read and observe all warnings and instructions in this manual and those marked on the unit. Retain this booklet for future reference.

There are two kinds of alarm symbols as follows:

The lightning bolt with arrowhead inside in an equilateral

WARNING

CAUTION

O W

E R

MEN

triangle is intended to alert the user to the presence of

dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to people.

The exclamation point inside an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

Installation of all TV monitors must be out of the driver s field of vision.

Do not mount the product where it will obstruct the deployment of the airbag or in an area where it would affect the driver s ability to control the vehicle. Also be careful to avoid mounting the product where it can become hazardous during sudden stops or in the event of an accident.

SPECIFICATIONS

Power

Screen Format

Resolution Pixel

Color System

A/V Input

A/V Output

Dimension

Note: This equipment has been tested and has been found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference. In some cases, the user will be required to correct the interference at his own expense.

DC 12V

16:9

2400x480

NTSC/PALAuto Select

DVD-iPOD-AV1-AV2

1EA

With shroud:14.6(L)X12.6(W)X3.3(H)inches

Without shroud:14.3(L)X12.4(W)X2.4(H)inches

Do not try and service these products yourself, a qualified service center or factory service center for all repairs.

Be careful not to drop or apply under pressure to the front panel of your video monitor. If the screen cracks due to misuse, your warranty will be void!

Be careful not to overload your cigarette lighter plug by adding more than one device at a time.

locale

Use extra caution with any liquids in your car. If you or your child spills any liquid on these products, pull your vehicle to the roadside

or wipe the products with a towel. Do not operate the equipment until all liquids have either evaporated or you have had the monitor inspected at a service center by a qualified technician. Severe harm or danger can result.

and turn the key off to disconnect

Use only a damp cloth to clean the screen and use only purified water on the cloth. wring out all excess water prior to wiping the screen. Do not use any cleaners or chemicals to clean the screen. In most cases a dry cloth will do!

Troubleshooting

Caution

CAUTION

Symptom

Buttons donot work.

No sound

Remote controldoes not workproperly.

Items to Check

Is thepower turned on?

Is theaudio which is connected with the audiocable set to receive the DVDsignal output?

Is audiocable is connected securely? Is themonitor which is connected

with the audio cable turned on?

Is thedigital audio output set in thecorrect position?

Is theremote control facing the remotesensor?

Is thedistance too far?

Is thereany obstacle in the middle?

Is thebattery weak?

Actions to be Taken

Check the car battery capacity.

Select the correct input mode for the audio receiver. Connect the audio cable into the jacks securely. Turn on the monitor connected with the audio cable. Set the DigitalAudio Output to the correct position,

and thenturn on the DVD player again by pressing the POWERbutton.

Point theremote control toward the remote sensor of the product.

Use the remote control within 15 feet. Remove the obstacle. Replace withnew battery.

Moisture or condensation on lens

When a disc is brought from a cold environment to a warm one, there may be moisture on the the disc, or condensation on the pickup lens. It will affect disc playback.

1. Remove the disc from the DVD player.

2. Turn on the power and leave it on for an hour to vaporize the condensation.

Quality installations are best performed by qualified and certified installers.

Don t touch the unit if there is a flash of lightning. You may receive an electric shock.

Do not cover or stop up heater ducts or vents. It may cause a fire or receive an electric shock.

Watching the monitor for an extended period of time without the engine running may deplete the vehicle s battery charge.

This product is designed for operation with a 12 Volt DC, negative ground vehicle. It is not suitable for operation under other conditions or voltages.

Do not bring magnetic devices such as credit card or magnetic card near the magnets.

Operating Notes

1. The operating temperature of this product is limited to 14 ~+140 F.

2. If your vehicle is extremely hot or cold you must allow time for your air conditioner or heater to cool or heat the vehicle until operating temperatures have returned to normal operating ranges.

3. Optimal picture quality is achieved when viewed from directly front of the monitor (+/-30degrees).

4. Do not open the housing and yourself. Refer

attempt to make any repairs

servicing to qualified personnel.

5. DVD Players use an invisible laser beam which can cause hazardous radiation exposure. Be sure to operate the unit correctly as instructed.

6. Do not cut the car power supply off while a disc is playing. It can cause damage to the DVD Player.

Monitor / Player System Components

iPOD

MONITOR

Remote Control

PLAY

POWER

Disc Information

DVD features

DVD discs provide high-resolution images with high-quality sound and surround sound effects. This DVD player can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and MP3 discs.

Discs that cannot be played

DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In addition, a CD or a CD-RW which was recorded on special software cannot be played.

Region code

Your DVD player is designed and manufactured to region management information that is recorded on a DVD disc. Please check the region code. 1: North America 2: Japan 3: Korea and Southeast Asia 4: Australia, Mid & South America 5: Russia 6: China

How to handle the disc

Don t touch the shiny side of the disc (the side with the embedded information). Don t stick a label or a glue-based note on either side of the disc. Don t use discs that have glue or a damaged label with exposed adhesive reside. It might result in damage to your DVD player. Don t put discs in the sunshine. Park your car in the shade.

WARNING:

iPOD

only can work between 0Cto35C(32Fto95F) please do not leave in the flip down unit when the car is left unattended. The high temperature of the locked car on a hot day will damage your .

iPOD

Monitor/DVD Player

Wireless Headphones

How to handle the discs

Only use round discs. Discs with other shapes like a star, a heat, etc. may cause damage to the player.If a disc is dirty, wipe softly with a wet cloth and then with a dry one. Before playback, wipe the disc outward from the center with a clean cloth. Do not use any type of solvent such as thinner, benzene, commercially available cleaners or antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.

Installation

Features And Controls

1. Open the package and check that these items are presents.

INSTALLATION PLATE

UNIT

SCREW A SCREW B

2. Connect the external compoments to the RCA cable or AV output. (Refer to the connection diagram on page 29)

3.Match the position of installation bracket and installation plate with screwA.

PLAY/PAUSE Button

PLAY

POWER

MENU Button

Dome Light Button

ON DOOR OFF

Skip Forward/Back Button

AV Select Button

POWER Button

+/- Buttons

POWER

EJECT Button

Disc loadingslot

4. Tighten the unit with the supplied screw B.

SD Input USB Input iPOD Input

Caution

Do not bring magnetic devices such as credit cards or magnetic cards near the monitor.

Audio Video

AV2I NPUT S

Reset

Features and Controls

Remote Control

POWER Turns the DVD Player/Monitor on or off.

MUTE

Press this button to switch off the audio during playback. Press again to restore the audio.

(iPOD)

To start playback of iPOD, press this button. Press again to pause the playback. If playback is paused, press this button to resume playback.

VOL-/VOL+

Use to incease or decrease volume level.

RIGHT( )/LEFT( ) ARROWS Use these buttons(press once)

to skip to the next or last track, chapter or file on the iPOD in the player. But if you use these buttons (press continuous) to select either fast forward or fast reverse playback.

AV SELECT

DVD iPOD AV1 AV2

MENU (OSD on monitor) Press this button to open the on-

screen menu system to setup and control various parameters of the monitor and DVD player.

UP/DOWN Use to move to the desired menu.

P/N

This button permits you to choose among Multi, PALand NTSC.

MODE Use this button to switch between

three modes

DVDSDUSB

MENU (DVD menu)

This button permits you to view the menu on the DVD.

SUBTITLE Use this button to select the menu for choosing a subtitle language.

iPOD

Vol-

Vol+

MONITOR

TITLE (Title menu)

When a DVD is playing, press this button to view the Title Menu.

DISPLAY Press to show elapsed or remaining time of a chapter or a title.

PBC (Video CD only)

Press this button to access the special Playback Control functions for VCD

2.0 format Video CD S.

NUMERIC button Use when making a selection on the

menu screen.

Connection Diagram

Red AUDIO(R)

White AUDIO(L)

Yellow VIDEO

Door Trigger

WHITE

+ DoorTrigger -

AV Input

(AV 2)

+ 12 V DC Battery

Chassis Ground

ACC

GAME

CAMCORDER

YELLOW

BLACK

RED

Red AUDIO(R)

White AUDIO(L)

Yellow VIDEO

AV Input

(AV 1)

Output

Red AUDIO(R)

White AUDIO(L)

Yellow VIDEO

FM ANTENNA

GAME

CAMCORDER

AMP

MONITOR

POWER

VOL-

VOL+

SD/USB/iPOD Functions

Name And Function Of Each Part

1. When USB or SD is inputed, the monitor will be displayed as shown below. But when you input USB that the function can not change into SD state (only the SD is moving). And you can select the desired menu by

pressing the MODE button on the

remote control of monitor.

Use the (arrow and ENTER) buttons to select and set desired settings.

00:00

000/003

00:00 kbps

3. When iPOD is inputed, the state can not be exchanged. But you can press the button on the remote control to selelct and set desired settings.AV

RETURN

Press this button to return root menu.

SETUP Press this button to display the Setup

menu. The Setup menu enables you to enter the settings required for the unit to work properly.

REPEAT

Press this button to change the playback mode to repeat, and to select the repeat mode.

A-B (repeat from A to B) Use this button to select the beginning

and end of a track which you wish to have repeat in playback.

VOL-/+ button Use to incease or decrease volume level.

AUDIO

Use this button to select one of the audio soundtracks programmed on a DVD disc. It is alse used to select the audio output mode for the DVD playback.

ENTER Press this button to confirm the item

you have found and highlighted using the arrow buttons. Usually this is done to confirm a selection or item to be played on the DVD.

ZOOM

If your DVD disc supports zooming in to see the program differently, pressing this button will enable you to change the amount of zoom.

UP/DOWN/RIGHT/LEFT ARROWS Use thes buttons to navigate the various menus and screens for the monitor and DVD systems.

PLAY/PAUSE To start playback of a disc, press this button. Press again to pause the playback. If playback is paused, press this button to resume playback.

GO TO

Use to search for a title or a chapter on your DVD disc.

STOP Press this button to stop the playback

of the current disc.

SKIP FORWARD/BACK Use these buttons to skip to the next or last track, chapter or file on the disc in the player.

FAST FORWARD/REVERSE PLAY

Use these buttons to select either fast forward or fast reverse playback.

Power And Mode Selection

Releasing The Monitor

Push the release button (located on the front edge of the screen housing) and lower the monitor. You can also adjust the swivel angle.

PLAY

POWER

DVD Functions

PBC

[DVD]/[AUDIO]/[MP3]

This button does not function in PBC mode.

[VCD]

You can turn the PBC (Play Back Control) function on or off by pressing this button. When PBC is loaded, the PBC function is enabled automatically. This function is similar to selection of DVD title. Please note that this function does not work with MP3 dics.

Make this arrow in DOWN direction only.

PULL BUTTON

Turning on The Monitor

1. Connect the monitor to external devices.

2. Press the POWER button on either the remote control or the unit once to turn the power on.

Press the same POWER button to turn the power off.

POWER

UNIT

REMOTE CONTROLLER

3.Power on the external devices and play.

Mute Function

1. Press the button on the remote control to mute the audio.MUTE

2. Press the button again on the remote control to return to theMUTE previous volume level.

Zoom

[DVD]

Some DVDs are programmed to allow you to zoom into the image, magnifying it. Pressing the ZOOM button does this in steps, according to the chart to the right.

[VCD]/[AUDIO]/[MP3]

This button does not function in this mode.

OSD

1/2

1/3

1/4

CONDITION

ZOOM X2

ZOOM X3

ZOOM X4

ZOOM X1 / 2

ZOOM X1 / 3

ZOOM X1 / 4

GO TO

The GO TO function allows you to begin playback at a specific location on the disc. To do this, press GO TO and navigate the screen which follows to select this playback location.

Title

Move to the desired title.

Chapter

Move to the desired chapter.

Audio

Selects the desired audio output.

Subtitle

Select the desired subtitle.

Angle

Watch the different view angle.

TT Time

Total time.

CH Time

Chapter time.

Repeat

Sets the repeat play.

Time Display

Watch play time.

Bitrate 31

Menu Title Chapter Audio Subtitle

Title Elapsed 0:20:02Title Elapsed 0:20:02

01/02

01 / 02

06/6106 / 61

5.1CH Chinese5.1CH Chinese OFF

Off

DVD Functions

Power and Mode Selection

Repeat

[DVD]

Pressing REPEAT button changes the play mode as follows:

OSD CONDITION

Chapter

Title

All

Repeat chapter

Repeat title

All

Repeat off

[VCD]

The REPEAT button does not function when a VCD disc is being played.

[AUDIO]

Pressing REPEAT button changes the play mode as follows:

OSD CONDITION

Track

All

Repeat single

All

Repeat off

[MP3]

Pressing REPEAT button changes the play mode as follows:

OSD CONDITION

Repeat One

Repeat Folder

Folder

Shuffle

Random

Single

Repeat folder one time

Single

Repeat folder

All

Random play

Single play

Selecting an AV mode

1. Turn the power ON on the unit and on the external devices.

2. Select the DVD, iPOD, AV1 or AV2 mode by pressing theAV Select button on the unit or on the remote control.

3. Play the external device.

NTSC/PAL

This button is used to select the video standard for the DVD mode between NTSC and PAL formats.

Angle

Some DVD s are recorded with additional footage which allows you to view a scene from a different camera angle. If the ANGLE feature is enabled in the Setup Menu (see page 14) and the disc has this option,an angle mark will be displayed on the screen. When that occurs, press the ANGLE button to see these alternate viewing angles.

Picture Control

DVD Functions

Contrast/Brightness/Color/FM

To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until you arrive at the screen for that item. Use the arrow buttons to adjust the value. Press the MENU button to make another adjustment or leave the MENU system.

1. Bring up the on-screen function menu by pressing the MENU button on the unit or the remote control.

2. Press the MENU button on the unit or the remote control of monitor until you see the screen you wish to adjust.

3. Use the arrow buttons to adjust the value.

4. Press the MENU button to make another adjustment or leave the MENU system.

CONTRAST

BRIGHTNESS

COLOR

Prev( )

[DVD]/[VCD]

Press this button to advance the player from the current chapter.to the previous chapter

[AUDIO]/[MP3]

Press this button to move to the previous track.

Next( )

[DVD]/[VCD]

Press this button to advance the player from the current chapter .to the next chapter

[AUDIO]/[MP3]

Press this button to move from the current track .to the next track

87.7

(FM function added 87.7 87.9 88.1 88.3 88.5

88.7 88.9 89.1MHz)

Repeat(A-B)

[DVD]/[VCD]/[AUDIO]

You can set the player to repeat a segment over and over until you cancel it. To do this, you mark the beginning of the desired segment (A) and the end of segment (B). The selected segment will be repeated automatically until canceled.

OSD CONDITION

Start point of repeat

Ending point repeat function

DVD Functions

Fast Reverse Searching( )

DVD Setup

[DVD]

Pressing FR button repeatedly changes the play mode as follow:

OSD CONDITION

FR 2X

FR 4X

FR 8X

FR 16X

FR 32X

PLAY

2X rewind search

4X rewind search

8X rewind search

16X rewind search

32X rewind search

Play

Fast Forward Searching( )

[DVD]

Pressing FF button changes the play mode as follow:

OSD CONDITION

FF 2X

FF 4X

FF 8X

FF 16X

FF 32X

PLAY

repeatedly

2X forward search

4X searchforward

8X searchforward

16X searchforward

32X searchforward

Play

[AUDIO]

Pressing FR button changes the play mode as follow:

OSD CONDITION

FR 2X

FR 4X

FR 8X

FR 16X

FR 32X

PLAY

repeatedly

2X rewindsearch

4X rewindsearch

8X rewindsearch

16X rewindsearch

32X rewindsearch

Play

[MP3]

Pressing FR button changes the play mode as follows:

OSD CONDITION

FR 2X

FR 4X

FR 8X

FR 16X

FR 32X

PLAY

repeatedly

2X rewindsearch

4X rewindsearch

8X rewindsearch

16X rewindsearch

32X rewindsearch

Play

[AUDIO]/[VCD]

Pressing FF button changes the play mode as follow:

OSD CONDITION

FF 2X

FF 4X

FF 8X

FF 16X

FF 32X

PLAY

repeatedly

2X forwardsearch

4X searchforward

8X searchforward

16X searchforward

32X searchforward

Play

[MP3]

Pressing FF button changes the play mode as follows:

OSD CONDITION

FF 2X

FF 4X

FF 8X

FF 16X

FF 32X

PLAY

repeatedly

2X forwardsearch

4X searchforward

8X searchforward

16X searchforward

32X searchforward

Play

Setup Menu-Main Page

When the button is pressed, the setup menu will be displayed as shown below. Select the menu category and make changes according to charge your preferences.

1. Press the button if the disc is playing.STOP

2. Press the button to display setup menu.SETUP

3. Use the (arrow and ENTER) buttons to select and set desired settings.

4. Press the button again to turn off the setup menu.SETUP

SETUP

General Setup PageGeneral Setup Page

TV Display PS

OSD Lang ENG

OSD

Lang ENG

Go To Speaker SetupGo To Speaker Setup

DVD Setup

DVD Functions

General Setup

1. TV Aspect Ratio

In the Setup function called TV Display, you set the player to output the video signal at the same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE. If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B (Letterbox).

Normal/PS4:3PANSCAN Choose this setting if you want the movie to fill the entire screen. (This might mean that the left and right edges won t be seen)

Normal/LB4:3 Choose this setting if you want to see the movie in its original aspect ratio. (The movie might appear with black bars at the top and bottom of the screen.)

Wide 16:9 WIDE SCREEN Choose this setting if your DVD Player is connected to a widescreen TV. (This opition is available only if the disc has a 16:9 display aspect ratio.)

General SetupPageGeneral SetupPage

TV Display

2. OSD Language

Use this option to set the OSD language. When selected, change to set the on-screen display language.

TV Display

OSD Lang

OSD

Set TVDisplay ModeSet TVDisplay Mode

TV DisplayTV Display PS OSD LangOSD Lang ENG

Set OSDLanguageSet OSDLanguage

PS Normal/PS

Lang

General SetupPageGeneral SetupPage

Normal/LB Wides

English

Subtitle(SUB-T)

[DVD]

This button is used to select the language for the on-screen display system. (This title menu may vary, depending on the particular DVD.)

Title

[DVD]

Used to display the title menu of the loaded DVD disc. This function is only present on discs which support it.

Slow( )

[DVD]/[VCD]

Use this button to play a disc in slow-forward or slow-reverse. Slow playback can be done at five different speeds. Pressing this button repeatedly decreases the speed in steps. Pressing a sixth time returns playback to the normal speed.

OSD

1/2

1/4

1/8

1/16

1/32

1/2

1/4

1/8

1/16

1/32

Play

CONDITION

2X slowforward

4X slowforward

8X slowforward

16X slowforward

32X slowforward

2X slowrewind

4X slowrewind

8X slowrewind

16X slowrewind

32X slowrewind

Play

DVD Functions

Display

[DVD]

Pressing the DISPLAY on the remote control changes the play mode as follows:

button

DVD Setup

Audio Setup

[AUDIO]

Pressing the display button displays information about the current CD on the screen as follows:

OSD

Title Elapsed

Title Remain

Chapter Elapsed

Chapter Remain

Display Off

[VCD]

Whenever press the button,title chapter will be displayed as follows:

CONDITION

Display the Title Elapsed

Display the Title Remain

Display the Chapter Elapsed

Display the Chapter Remaining

No sign

OSD CONDITION

Single Elapsed

Single Remain

Total Elapsed

Total Remain

Display the single elapsed

Display the single remain

Display the total elapsed

Display the total remaining

[MP3]

Your DVD player will display the counter automatically when you play the MP3 disc.

OSD CONDITION

Single Elapsed

Single Remain

Display Off

Display time

Left display time

No sign

Number Buttons

[DVD]

The 0 through 9 number buttons are used to enter the number of the track, the number of the DVD chapter, the time, the date, etc.

[AUDIO]

Select a track by pressing the corresponding number button.

[DVD]

You can select a track in the folder by pressing the corresponding number button.

OSD CONDITION

Select Track:__ Select track no

OSD CONDITION

__:__ Select track no

General Setup PageGeneral Setup Page

Speaker Setup

Equalier

3D Processing

Processing

Go To Speaker SetupGo To Speaker Setup

Show below are two examples of Audio Setups.

1. Speaker Setup

General Setup PageGeneral Setup Page

Speaker Setup

Equalizer

3D Processing

Processing

Go To Speaker Setup PageGo To Speaker Setup Page

General Setup PageGeneral Setup Page

Downmix VRS

Front Speaker LRG

Front

Speaker LRG

Set DownmixModeSet DownmixMode

LT/RT

Stereo

VSURR

SURR

Off

DVD Setup

DVD Functions

Downmix

Use this function to set the input audio signal to match your speaker setup.

General Setup PageGeneral Setup Page

Downmix VRS

Front Speaker LRG

Front

Speaker

Set DownmixModeSet DownmixMode

LRG

LT/RT

Stereo

VSURR

SURR

Off

2. Equalizer Settings

General Setup PageGeneral Setup Page

Speaker Setup

Equalizer

3D Prosessing

Prosessing

Go To Equalizer PageGo To Equalizer Page

EQ Egualizer Type

In this menu you can choose the desired preset equalizer mode.

(Choose from Rock, Pop, Live,Dance, Techno, ClassicorSoft)

Front Speaker

Use this function to change the setting from the factory.

General Setup PageGeneral Setup Page

Downmix VRS

Front Speaker LRG Larege

Front

Speaker

Set Front SpeakerSet Front Speaker

Equalizer PageEqualizer Page

EQ Type

EQ Type None None

Select EqualizerTypeSelect EqualizerTy pe

LRG Larege

Rock Pop Live Dance Techno Classic Soft

Equalizer PageEqualizer Page

EQ Type None None

EQ Type

Select EqualizerTypeSelect EqualizerTy pe

Rock Pop Live Dance Techno Classic Soft

Stop( )

[DVD]/[AUDIO]

In DVD mode, Press STOP to stop playback. To resume playback, press PLAY/PAUSE. If you press STOP and then PLAY/PAUSE twice, the player will begin playback at the first scene of the movie.

[MP3]

In MP3 mode, Pressing STOP will stop audio playback. Press PLAY/PAUSE to begin playback of the first title on the disc.

the

1 Time Press Play Key To Continue

2Time

1 Time Stop Stop

OSD CONDITION

Stop

Disc Stop

OSD CONDITION

Arrows( / / / )

[DVD]

In addition to navigating the various menus, you can use the arrow buttons to define the area of the screen you want to enlarge in ZOOM mode.

[MP3]

After pressing STOP button, select the desired folder and set the condition by pressing ENTER button.

Setup

Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD settings to suit your equipment and preferences.

[DVD]

Pressing the SETUP brings up the DVD disc menu. The content of this menu varies, depending on the programming of the disc.

DVD Functions

DVD Setup

Eject

When this button is pressed, the disc is ejected. When this button is pressed for more than 3 seconds, the disc is unconditionally ejected. So, you can use this function when you encounters not ejected situation due to unknown reasons.

Vol+/Vol-

Use these buttons to adjust the audio output level of the speaker from 0 to 20.

Mute

Press MUTE to turn off the audio part of the currently playing program. Press it again to return the audio volume to the level at which you were last listening.

OSD CONDITION

Mute

Mute off

Mute

Mute off

Play or Pause( )

Whenever this button is pressed, the mode switches from pause to play or play to pause.

OSD CONDITION

Play Disc

Pause

Preference

1. TV Type

Choose the proper TV format appropriate to the monitor you have connected to the player from the following: NTSC, PAL or Multi type.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to TV Type.

4. Press the ENTER button.

5. Press the / buttons to select TV Type.

2. Parental

The Parental Control settings limit the player to only play content at or below a certain movie rating. The ratings systems in different countries vary. In the USA, the Motion Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc. In this menu item, you can set what is the highest level of rating you wish to allow the unit to play.

1. Press the SETUP button when stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Parental.

4. Press the ENTER button.

5. Press the / buttons to select desired parental level.

Preference PagePreference Page

TV Type

Parental

Audio Subtitle Default

Set TVStandard

Preference PagePreference Page

TV Type

Parental

Audio Subtitle Default

Set Parental Control

NTSC

ENG

NTSC

ENG

PAL Multi NTSC

1 KID SAF

1KIDSAF

3PG

4PG13

PG 13

5 PGR

7 Nc17

Nc17

8ADULT

ADULT

Audio

[DVD]

Change the audio output format. (A the disc supports available audio

vailable only if

type.)

[VCD]/[AUDIO]

Changes the audio output format. (Available only of the disc supports available audio type.)

[MP3]

An invalid button press.

OSD

1/2:Ac32CHEnglish

2/2:Ac35.1CHEnglish

OSD

Stereo

Mono Left

Mono Right

Mix Mono

CONDITION

2 Channel

5.1 Channel

CONDITION

Stereo

Mono Left

Mono Right

Mix Mono

3. Audio

Use the audio language menu to select the subtitle language that you prefer. If the disc you are playing has that language available, it will display subtitles in that language.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move toAudio.

4. Press the ENTER button.

5. Press the / buttons to select desired audio language.

Preference PagePreference Page

TV Type

Parental

Audio Subtitle Default

Preferred AudioLanguage

NTSC

ENG

English French

French

German

Italian

Spanish

Portuguese

Russian

Chinese

DVD Setup

4. Subtitle

In the Subtitle menu, you can select a subtitle language. Please note that subtitle will only appear in this language if the disc programming has included it.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Subtitle.

4. Press the ENTER button.

5. Press the / buttons to select desired subtitle.

5. Default

If you select RESET when in the DEFAULT settings mode, all the settings of the Setup Menu will be returned to the factory defaut settings, except for Parental Level, Region and Password values.

1. Press the SETUP button when stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Default.

4. Press the ENTER button to select Reset.

Preference PagePreference Page

TV Type

Parental

Audio Subtitle

Default

Preferred SubtitleLanguage

Preference PagePreference Page

TV Type

Parental

Audio Subtitle Default

Load Factory Setting

NTSC On ENG

NTSC

ENG

Reset

French Spanish Chinese Japanese Korean Russian

Thai

Others

Password Setup

1. Password Mode

Password Setup, which is required for using the Parental Controls settings, is divided into two modules: Turning on the Password function, and setting a Password. The first step is to turn it on in the Password Mode setting.

Password Setup PagePassword Setup Page

Password Mode OnPassword Mode On On Password

Password Mode

2. Password Change

In the Password setup, you must first enter the current 6-digit passcode, and then you have the opportunity to change it. The factory default passcode is . Once you have changed and confirmed the password, press the ENTER button.

Password Setup PagePassword Setup Page

Password Mode OnPassword Mode On On Password Change

Off

136900

Old Password

New Password

Confirm PWD

Change PasswordChange Password

Please EnterOld PasswordPlease Enter Old Password

Farenheit Technologies MD-1120CM User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual