HRD-9BK HRD-9BG HRD-9GR HRD-9GRDK
Two Preloaded 8.8" Wide Touch Screen Universal
Replacement Headrest Monitors Package
USB
SD
AV2
OWNER S MANUAL
Specifications
Contents
Power Requirements
Power Consumption
Screen Size
Screen Format
Resolution Pixel
A/V Input
A/V Output
Dimensions(
With shroud)
LCD Panel Type
Compatible video standard
Note : This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
DC 12V
9W
8.8 TFT-LCD
16:9 Wide
1440x234
DVD-AV1-AV2
1EA
11.6(L)X8.7(W)X4.7(H)inches
Active Matrix TFT
NTSC/PALauto select
Caution
How To Control The Monitor
Remote Control
Power and Mode Selection
How to Swivel The Monitor
How to Watch The Monitor
Selecting an AV mode
Picture Control
Contrast/Brightness/Color/FM
DVD Setup
Setup Menu
General Setup
TV Aspect Ratio
Angle Viewing
OSD Language
Screen Saver
Audio Setup
Dolby Digital Setup
Equalizer Settings
Video Setup
Quality
Preferences Setup
TV Type
PBC
Audio
Subtitle
Disc Menu
Parental
Default
Password Setup
Password Mode
Password Change
DVD Functions
Eject
Vol+/Vol-
Mute
4
Play or Pause
6
Audio
9
Stop
11
Arrows
11
Setup
11
Menu
12
Display
13
Number Buttons
13
Subtitle
Title
14
14
Slow
Fast Reverse Searching
15
15
Fast Forward Searching
15
Previous
15
Next
16
Repeat A-B
16
Repeat
17
NTSC/PAL
17
Angle
19
PBC
19
Zoom
22
GO TO
22
SD/USB Functions
22
22
Connection Diagram
22
23
Installation
23
Disc Information
23
24
Troubleshooting
24
24
Specifications
25
25
25
25
25
25
26
26
26
26
27
27
28
28
28
29
29
30
30
30
31
31
31
32
32
32
33
34
35
36
37
38
38
3
Caution
Please read and observe all warnings and instructions in this manual
and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
Troubleshooting
WARNING
CAUTION
P
O
W
E
R
A
V
MEN
U
The lightning bolt with arrowhead inside in an equilateral
triangle is intended to alert the user to the presence of
dangerous voltage within the product s enclosure that may be
,
of sufficient magnitude to constitute a risk of electric shock to
people.
The exclamation point inside an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
WARNING
Do not mount the product where
Installation of all TV monitors
must be out of the driver s
field of vision.
Do not try and service these
products yourself, a
qualified service center or
factory service center for all
repairs.
Be careful not to drop or
apply under pressure to the
front panel of your video
monitor. If the screen cracks
due to misuse, your warranty
will be void!
,
locale
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician. Severe harm or danger can result.
it will obstruct the deployment of
the airbag or in an area where it
would affect the driver s ability
to control the vehicle. Also be
careful to avoid mounting the
product where it can become
hazardous during sudden stops
or in the event of an accident.
Use extra caution with any liquids
in your car. If you or your child
spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
Symptom
Buttons do not work.
No sound
Remote controldoes
not workproperly.
Items to Check
Is thepower turned on?
Is theaudio which is connected with
the audiocable set to receive
the DVDsignal output?
Is audiocable connected securely?
Is themonitor which is connected
with the audio cable turned on?
Is theaudio output set
in thecorrect position?
Is theremote control facing
the remote sensor?
Is thedistance too far?
Is thereany obstacle in the middle?
Is thebattery weak?
Actions to be Taken
Check the car battery capacity.
Select the correct input mode for the audio receiver.
Connect the audio cable into the jacks securely.
Turn on the monitor connected with the audio cable.
Set the Audio Output to the correct position,
and thenturn on the DVD player again by pressing
the POWERbutton.
Point the remote control toward the remote sensor of
the product.
Use the remote control within 15 feet.
Remove the obstacle.
Replace with new battery.
Moisture or condensation on lens
When a disc is brought from a cold environment to a warm one, there may be moisture
on the the disc, or condensation on the pickup lens. It will affect disc playback.
1. Remove the disc from the DVD player.
2. Turn on the power and leave it on for an hour to vaporize the condensation.
4
Use only a damp cloth to clean
the screen and use only purified
water on the cloth. wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
37
Disc Information
Caution
DVD features
DVD discs provide high-resolution images with high-quality sound. This DVD player
can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and
Mp3 discs.
Discs that cannot be played
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In
addition, a CD or a CD-RW which was recorded on special software cannot be played.
Region code
Your DVD player is designed and manufactured to region management information
that is recorded on a DVD disc. Please check the region code.
1: North America 2: Japan 3: Korea and Southeast Asia
4: Australia, Mid & South America 5: Russia 6: China
How to handle the disc
Don t touch the shiny side of the disc (the side with the embedded information).
Don t stick a label or a glue-based note on either side of the disc.
Don t use discs that have glue or a damaged label with exposed adhesive residue.
It might result in damage to your DVD player.
Don t put discs in the sunshine.
Park your car in the shade.
How to handle the discs
Only use round discs. Discs with other shapes like a star, a heart, etc. may cause
damage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dry
one. Before playback, wipe the disc outward from the center with a clean cloth. Do not
use any type of solvent such as thinner, benzene, commercially available cleaners or
antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.
CAUTION
Quality installations are best
performed by qualified and
certified installers.
Don t touch the unit if there is
a flash of lightning. You may
receive an electric shock.
Do not cover or stop up heater
ducts or vents. It may cause a
fire or receive an electric shock.
Operating Notes
1. The operating temperature of this product is limited to 14 ~+140 F.
2. If your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle until operating temperatures
have returned to normal operating ranges.
3. Optimal picture quality is achieved when viewed from directly front of the
monitor (+/-30degrees).
4. Do not open the housing and attempt to make any repairs yourself. Refer
servicing to qualified personnel.
5. DVD Players use an invisible laser beam which can cause hazardous radiation
exposure. Be sure to operate the unit correctly as instructed.
6. Do not cut the car power supply off while a disc is playing. It can cause
damage to the DVD Player.
7. If the buttons get stuck, please try to press the up of buttons, it will get back.
It won't impact using normal.
8. If you cann't find the files name in list when playing, please reset units or
turn off/on over again.
9. If the unit cann't be change mode when playing some special files which the unit
didn't support, please reset units or turn off/on over again.
Watching the monitor for an
extended period of time
without the engine running
may deplete the vehicle s
battery charge.
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
Do not bring magnetic devices
such as credit card or magnetic
card near the magnets.
36
5
How To Control The Monitor
1. Power On/Off
MENU
MODE
MPWR
Installation
SD
USB
AV2
USB
SD
AV2
USB
SD
<Unit>
To power on theunit, press POWERbutton on themonitor;
or pressPOWER button onthe remote control.
MENU
MODE
USB
SD
To power the offunit, press MPWRor PWR onthe monitor;
or pressPOWER button onthe remote control.
2. Mode Change
(1) Pressany place onthe monitor screenwith your fingersoftly ,and you will seethe MODE buttonon the monitor .
1
VOL
VOL
MODE
PWR
AV2
+
-
USB
SD
(2) Pressthe MODE buttonto change anInput Mode.(AV1-AV2-DVD)
PLAY
STOP
PREV
MENU
NEXT
PLAY
STOP
PREV
NEXT
SD
MENU
MENU
USB
MODE
VOL
VOL
MODE
PWR
MPWR
AV2
Product installed
1. Remove the existing headrest from the seat.
MPWR
AV2
+
-
2
AV2
2. Adjust the posts of the new headrest to fit the holes in the seat where the
headrest will be installed. The post can be moved together or apart
grasp one post in each hand, move the posts in opposing directions
(like they were walking) while pushing them toward each other or away
from each other.
3. Insert the cable in the proper hole. Insert the posts into the holes in the
seat and carefully work the headrest into position. Make sure the cable
is not pinched.
4. Run the cable down the seat and out to the location of the video source
unit (such as a DVD player).
See the picture on the right and you can adjust
5.
the distance between the tubes to required
space(pole width adjustments 4 ~ 8.2 .
How to use the Adapter tubes
)
USB
SD
AV2
Since the spacing of the mounting holes
can vary on different veicles we supply
two adapter tubes. Use these tubes when
the headrest mounting holes in your seat
are too large for the posts of the headrest
monitor.
USB
SD
AV2
USB
SD
6
AV2
35
Connection Diagram
How To Control The Monitor
Connect the wires as indicated:
a. Red: Connect to a switched(+) 12 volt source (ACC). Use a lead that has(+) 12V
when the ignition on or in the ACC position so the monitors turns off when the key is
in the off position. Wiring the monitors hot could cause your battery to run down
when the engine is not running.
b. Black: Connect to a good chassis ground.
c. Reversing the polarity of the red and black leads will damage the monitor.
d. Connect the video input connector to the video output from the source unit
(i.e. DVD player)
e. Test the syetem.
USB
SD
AV2
3. Picture Control Menu
(1) When the MENUbutton on the monitorscreen is
pressed, the picture settingmenu will be shown.
MENU
CONTRAST
BRIGHTNESS
COLOR
FM
MENU
SD
RESET
MODE
USB
50
AV2
Note
If thereis no moretouch control for5 seconds
while anybuttons or thePicture Control Menu
are beingshown on themonitor, all buttons &
menu willbe disappeared automatically.
(2) Use to achievethe desired settings for
CONTRAST,BRIGHTNESS,COLOR,
FM and RESET.
CONTRAST :Contrast between light andshade
BRIGHTNESS : Dim Bright
COLOR : Control of color
SHARPNESS :Sharpness of view
FM : 87.7 89.1MHz
RESET : Brings its factorydefaults
(3) Press the buttoncontinuously to highlight
MENU
the desired picture settingmenu to control, and
adjust the values withthe left /right arrow buttons
while menu OSD isstill displayed on thescreen for
changing the values.
(4) When using aRemote Controller, pressMENU button
on the Remote Controllerto bring out themenu, and
adjust the values.
3. Description of Remoto Control Menu for DVD Player
PLAY
Play DVD
STOP
Stop DVDplay
Move tothe previous
PREV
chapter ortrack
NEXT
Move tothe next
chapter ortrack
PLAY
STOP
PREV
NEXT
MENU
VOL
VOL
MODE
PWR
VOL+
+
-
Volume Up
VOL-
Volume Down
MODE
AV1 AV2
PWR
DVD Player
Power On/Off
DVD
VIDEO OUTPUT
AUDIO OUTPUT
AUDIO OUTPUT
34
VIDEO INPUT
AUDIO INPUT
AUDIO INPUT
SD
MENU
Brightness
Contrast
Tint
Color
Sharpnss
Reset
USB
Use thesebuttons to selecteither fast
forward orfast reverse playback.
AV2
RF Wireless Stereo Headphone
(A CH:914MHz B CH:915MHz)
7
How To Control The Monitor
SD/USB Functions
1. When USB or SD is inputed, the monitor will be displayed as shown below. But when
you input USB that the function can not change into SD state (only the SD is
moving). And you can select the desired menu by
remote control of monitor.
Use the (arrow and ENTER) buttons to select and set desired settings.
2.
pressing the MODE button on the
S
USB
SD
9 10
AV2
1 2 34567
88
HEADPHONE JACK
Headphone output
AV2 Inputs
11
00:00
000/003
\
..
..
00:00 kbps
STOP
When this button is pressed,
playback is stopped.
8
PIPE
Adjustable steel Pipe
9
SD Inputs
10
USB Inputs
REMOTE IR SENSOR
11
33
DVD Functions
Remote Contro
PBC
[DVD]/[AUDIO]/[MP3]
This button does not function in PBC mode.
[VCD]
You can turn the PBC (Play Back Control) function on or off by pressing this button.
When PBC is loaded, the PBC function is enabled automatically. This function is
similar to selection of DVD title. Please note that this function does not work with
MP3 dics.
Zoom
[DVD]
Some DVDs are programmed to allow you to zoom into
the image, magnifying it. Pressing the ZOOM button
does this in steps, according to the chart to the right.
[VCD]/[AUDIO]/[MP3]
This button does not function in this mode.
OSD
2X
3X
4X
1/2
1/3
1/4
CONDITION
ZOOM X2
ZOOM X3
ZOOM X4
ZOOMX1/2
ZOOM X1 / 3
ZOOM X1 / 4
Off
GO TO
The GO TO function allows you to begin playback at a specific location on the disc. To
do this, press GO TO and navigate the screen which follows to select this playback
location.
Title
Move to the desired title.
Chapter
Move to the desired chapter.
Audio
Selects the desired audio output.
Subtitle
Select the desired subtitle.
Angle
Watch the different view angle.
TT Time
Total time.
CH Time
Chapter time.
Repeat
Sets the repeat play.
Time Display
Watch play time.
Bitrate 31Bitrate 31
Menu
Title
Chapter
Audio
Subtitle
Title Elapsed 0:20:02Title Elapsed 0:20:02
01/0201 / 02
06/6106 / 61
5.1CH Chinese5.1CH Chinese
OFF
Remote Control
1
POWER
Turns the DVD Player/Monitor on or off.
MUTE
2
Press this button to switch off the
audio during playback. Press again
to restore the audio.
(IPOD) (not function in this unit)
3
To start playback of iPOD, press
this button. Press again to pause
the playback. If playback is paused,
press this button to resume
playback.
VOL-/VOL+ (not function in this unit)
Use to incease or decrease
volume level.
RIGHT( )/LEFT( ) ARROWS
(not function in this unit)
Use these buttons(press once)
to skip to the next or last track,
chapter or file on the iPOD in
the player. But if you use these
buttons (press continuous) to
select either fast forward or fast
reverse playback.
AV SELECT
DVD AV1 AV2
MENU (OSD on monitor)
Press this button to open the onÂscreen menu system to setup and
control various parameters of the
monitor and DVD player.
UP/DOWN
Use to move to the desired menu.
P/N
This button permits you to choose
among Multi, PAL and NTSC.
MODE
Use this button to switch between
three modes
DVDSDUSB
MENU (DVD menu)
This button permits you to view the
menu on the DVD.
SUBTITLE
Use this button to select the menu
for choosing a subtitle language.
iPOD
Vol+
Vol-
TITLE (Title menu)
When a DVD is playing, press this
button to view the Title Menu.
DISPLAY
Press to show elapsed or remaining
time of a chapter or a title.
PBC (Video CD only)
Press this button to access the special
Playback Control functions for VCD
2.0 format Video CD S.
NUMERIC button
Use when making a selection on the
menu screen.
MONITOR
32
9
Remote Control
RETURN
Press this button to return to the root menu.
SETUP
Press this button to display the Setup
menu. The Setup menu enables you
to enter the settings required for the
unit to work properly.
REPEAT
Press this button to change the playback
mode to repeat.
A-B (repeat from A to B)
Use this button to select the beginning
and end of a track which you wish to have
repeat in playback.
VOL-/+ button
Use to incease or decrease volume level.
AUDIO
Use this button to select one of the
audio soundtracks programmed on a
DVD disc. It is alse used to select the
audio output mode for the DVD
playback.
ENTER
Press this button to confirm the item
you have found and highlighted using
the arrow buttons. Usually this is done
to confirm a selection or item to be
played on the DVD.
ZOOM
If your DVD disc supports zooming in
to see the program differently, pressing
this button will enable you to change
the amount of zoom.
UP/DOWN/RIGHT/LEFT ARROWS
Use thes buttons to navigate the
various menus and screens for the
monitor and DVD systems.
PLAY/PAUSE
To start playback of a disc, press this
button. Press again to pause the
playback. If playback is paused, press
this button to resume playback.
GO TO
Use to search for a title or a chapter on
your DVD disc.
STOP
Press this button to stop the playback
of the current disc.
SKIP FORWARD/BACK
Use these buttons to skip to the next
or last track, chapter or file on the
disc in the player.
FAST FORWARD/REVERSE PLAY
Use these buttons to select either fast
forward or fast reverse playback.
DVD Functions
Repeat
[DVD]
Pressing REPEAT button changes
the play mode as follows:
OSD CONDITION
Chapter
Title
All
Repeat chapter
Repeat title
All
Repeat off
[VCD]
The REPEAT button does not function
when a VCD disc is being played.
NTSC/PAL
This button is used to select the video standard for the DVD mode between NTSC
and PAL formats.
Angle
Some DVD s are recorded with additional footage which allows you to view a scene
from a different camera angle. If the ANGLE feature is enabled in the Setup Menu
(see page 14) and the disc has this option,an angle mark will be displayed on
the screen. When that occurs, press the ANGLE button to see these alternate viewing
angles.
[AUDIO]
Pressing REPEAT button changes
the play mode as follows:
OSD CONDITION
Track
All
Repeat single
All
Repeat off
[MP3]
Pressing REPEAT button changes
the play mode as follows:
OSD CONDITION
Repeat One
Repeat Folder
Folder
Shuffle
Random
Single
Repeat folder one time
Single
Repeat folder
All
Random play
Single play
10
31
DVD Functions
Power And Mode Selection
Prev( )
[DVD]/[VCD]
Press this button to advance the player from the current chapter.to the previous
chapter
[AUDIO]/[MP3]
Press this button to move to the previous track.
Next( )
[DVD]/[VCD]
Press this button to advance the player from the current chapter .to the next chapter
[AUDIO]/[MP3]
Press this button to move from the current track .to the next track
How to Swivel The Monitor
You can adjust the swivel angle as shown below.
USB
SD
Make this arrow to swivel the monitor
How to Watch The Monitor
1. Connect the monitor to the external devices.
AV2
Repeat(A-B)
[DVD]/[VCD]/[AUDIO]
You can set the player to repeat a segment over and over until you cancel it. To do
this, you mark the beginning of the desired segment (A) and the end of segment (B).
The selected segment will be
repeated automatically until canceled.
OSD CONDITION
A
AB
Start point of repeat
Ending pointrepeat function
30
2. Press the button on either the remote control or the unit once to turn
the power on.
Press the same button to turn the power off.
3. Turn on the external devices and view.
POWER
POWER
UNIT
REMOTE CONTROLLER
11
Power and Mode Selection
DVD Functions
Selecting an AV mode
1. Turn the power ON on the unit and on the external devices.
2. Select the DVD, AV1 or AV2 mode by pressing theAV Select button on
the unit or on the remote control.
3. Play the external device.
Fast Reverse Searching( )
[DVD]
Pressing FR button repeatedly changes
the play mode as follow:
OSD CONDITION
FR 2X
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
2X rewind search
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
Fast Forward Searching( )
[DVD]
Pressing FF button changes
the play mode as follow:
OSD CONDITION
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
repeatedly
2X forward search
4X searchforward
8X searchforward
16X searchforward
32X searchforward
Play
[AUDIO]
Pressing FR button
changes the play mode as follow:
OSD CONDITION
FR 2X
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
repeatedly
2X rewindsearch
4X rewindsearch
8X rewindsearch
16X rewindsearch
32X rewindsearch
Play
[MP3]
Pressing FR button
changes the play mode as follows:
OSD CONDITION
FR 2X
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
repeatedly
2X rewindsearch
4X rewindsearch
8X rewindsearch
16X rewindsearch
32X rewindsearch
Play
[AUDIO]/[VCD]
Pressing FF button
changes the play mode as follow:
OSD CONDITION
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
repeatedly
2X forwardsearch
4X searchforward
8X searchforward
16X searchforward
32X searchforward
Play
[MP3]
Pressing FF button
changes the play mode as follows:
OSD CONDITION
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
repeatedly
2X forwardsearch
4X searchforward
8X searchforward
16X searchforward
32X searchforward
Play
12
29
DVD Functions
Picture Control
Subtitle(SUB-T)
[DVD]
This button is used to select the language for the on-screen display system.
(This title menu may vary, depending on the particular DVD.)
Title
[DVD]
Used to display the title menu of the loaded DVD disc.
This function is only present on discs which support it.
Slow( )
[DVD]/[VCD]
Use this button to play a disc in slow-forward or
slow-reverse. Slow playback can be done at five
different speeds. Pressing this button repeatedly
decreases the speed in steps. Pressing a sixth
time returns playback to the normal speed.
OSD
1/2
1/4
1/8
1/16
1/32
1/2
1/4
1/8
1/16
1/32
Play
CONDITION
2X slowforward
4X slowforward
8X slowforward
16X slowforward
32X slowforward
2X slowrewind
4X slowrewind
8X slowrewind
16X slowrewind
32X slowrewind
Play
Contrast/Brightness/Color/FM
To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until
you arrive at the screen for that item. Use the arrow buttons to adjust the value.
Press the MENU button to make another adjustment or leave the MENU system.
1. Bring up the on-screen function menu by pressing the MENU button on the unit
or the remote control.
2. Press the MENU button on the unit or the remote control of monitor until you see
the item you wish to adjust.
3. Use the arrow buttons to adjust the value.
4. Press the MENU button to make another adjustment or leave the MENU system.
CONTRAST
50
BRIGHTNESS
50
COLOR
50
FM
87.7
(FM function added 87.7 87.9 88.1 88.3 88.5
88.7 88.9 89.1MHz)
28
13
DVD Setup
DVD Functions
Setup Menu-Main Page
When the button is pressed, the setup menu will be displayed as shown
below. Select the menu category and make changes according to your preferences.
1. Press the button if the disc is playing.STOP
2. Press the button to display setup menu.SETUP
SETUP
General Setup PageGeneral Setup Page
TV DisplayTV Display
Angle MarkAngle Mark
OSD LangOSD Lang
Screen SaverScreen Saver
Go To General Setup PageGo To General Setup Page
PS
On
ENG
On
Display
[DVD]
Pressing the DISPLAY on the
remote control changes the play mode as
follows:
OSD
Title Elapsed
Title Remain
Chapter Elapsed
Chapter Remain
Display Off
button
CONDITION
Display the Title Elapsed
Display the Title Remain
Display the Chapter Elapsed
Display the Chapter Remaining
No sign
[VCD]
Whenever press the button,title chapter
will be displayed as follows:
OSD CONDITION
Single Elapsed
Single Remain
Display Off
Display time
Left display time
No sign
[AUDIO]
Pressing the display button displays
information about the current CD on the
screen as follows:
OSD CONDITION
Single Elapsed
Single Remain
Total Elapsed
Total Remain
Display the single elapsed
Display the single remain
Display the total elapsed
Display the total remaining
[MP3]
Your DVD player will display the counter
automatically when you play the MP3 disc.
3. Use the (arrow and ENTER) buttons to select and set desired settings.
4. Press the button again to turn off the setup menu.SETUP
14
Number Buttons
[DVD]
The 0 through 9 number buttons are used to enter the number of the track, the number
of the DVD chapter, the time, the date, etc.
[AUDIO]
Select a track by pressing the
corresponding number button.
[DVD]
You can select a track in the folder by
pressing the corresponding number button.
OSD CONDITION
Select Track:__ Select track no
OSD CONDITION
__:__ Select track no
27
DVD Functions
DVD Setup
Stop( )
[DVD]/[AUDIO]
In DVD mode, Press STOP to stop playback.
To resume playback, press PLAY/PAUSE. If
you press STOP and then PLAY/PAUSE twice,
the player will begin playback at the first
scene of the movie.
[MP3]
In MP3 mode, Pressing STOP will stop
audio playback. Press PLAY/PAUSE to begin
playback of the first title on the disc.
the
1 Time Press Play Key To Continue
2Time
1 Time Stop Stop
OSD CONDITION
Stop
Disc Stop
OSD CONDITION
Arrows( / / / )
[DVD]
In addition to navigating the various menus, you can use the arrow buttons to define the area
of the screen you want to enlarge in ZOOM mode.
[MP3]
After pressing STOP button, select the desired folder and set the condition by pressing
ENTER button.
Setup
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD
settings to suit your equipment and preferences.
Menu
[DVD]
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,
depending on the programming of the disc.
General Setup
1. TV Aspect Ratio
In the Setup function called TV Display, you set the player to output the video signal at the
same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B
(Letterbox).
Normal/PS4:3PANSCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won t be seen)
Normal/LB4:3
Choose this setting if you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)
Wide 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreen TV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)
General SetupPageGeneral SetupPage
2. Angle Viewing
Some DVD discs contain programming which allows you
to view a scene from a few different camera angles. You
can tell when a scene is so recorded when an Angle Mark
is displayed on the screen. This mark will only appear if you
have enabled the Angle Mark feature
in the DVD Setup menu.
On: When selected, the screen will be shown with
angle mark.
Off: When selected, no angle mark is shown on
the screen.
3. OSD Language
Use this option to set the OSD language.
When selected, change to set the on-screen display
language.
TV DisplayTV Display PS Normal/PS
Angle MarkAngle Mark
OSD LangOSD Lang
Screen SaverScreen Saver
Set TVDisplay ModeSet TVDisplay Mode
General SetupPageGeneral SetupPage
TV DisplayTV Display PS
Angle MarkAngle Mark On On
OSD LangOSD Lang
Screen SaverScreen Saver
Set AngleMarkSet AngleMark
TV DisplayTV Display PS
Angle MarkAngle Mark On
OSD LangOSD Lang ENG
Screen SaverScreen Saver On
On
ENG
On
ENG
On
General SetupPageGeneral SetupPage
Normal/LB
Wide
Off
English
English
Korean
Korean
French
French
German
German
Italian
Italian
Spanish
Spanish
Portuguese
Portuguese
Dutch
Dutch
26
Set OSDLanguageSet OSDLanguage
15
DVD Setup
DVD Functions
4. Screen Saver
The screen saver is useful to prevent your display
from becoming damaged. The screen saver picture
appears when you leave the DVD player in stop mode
for about two minutes.
Audio Setup
General SetupPageGeneral SetupPage
TV DisplayTV Display PS
Angle MarkAngle Mark
OSD LangOSD LangOnENG
Screen SaverScreen Saver On
Screen SaverScreen Saver
Eject
When this button is pressed, the disc is ejected. When this button is pressed for more
than 3 seconds, the disc is unconditionally ejected. Use this function if you encounter
On
Off
difficultly ejecting a disc.
Vol+/Vol-
Use these buttons to adjust the audio output level of the speaker from 0 to 20.
Mute
Press MUTE to turn off the audio part of the
currently playing program. Press it again to
return the audio volume to the level at which
you were last listening.
OSD CONDITION
Mute
Mute off
Mute
Mute off
Play or Pause( )
Whenever this button is pressed, the mode
switches from pause to play or play to pause.
OSD CONDITION
Play Disc
Pause
Audio Setup PageAudio Setup Page
Speaker Setup
Speaker Setup
SPDIF Setup
SPDIF
Setup
Dolby Digital Setup
Dolby
Channel Delay
Channel
Equalizer
Equalizer
3D Processing
3D
Go To Speaker Setup PageGo To Speaker Setup Page
Digital Setup
Delay
Processing
16
Audio
[DVD]
Change the audio output format.
(A the disc supports available audio
vailable only if
type.)
[VCD]/[AUDIO]
Changes the audio output format.
(Available only of the disc supports available audio
type.)
[MP3]
An invalid button press.
25
OSD
1 /2 : Ac3 2CH English
2 /2 : Ac3 5.1CH English
OSD
Stereo
Mono Left
Mono Right
Mix Mono
CONDITION
2 Channel
5.1 Channel
CONDITION
Stereo
Mono Left
Mono Right
Mix Mono
DVD Setup
DVD Setup
Password Setup
1. Password Mode
Password Setup, which is required for using the Parental Controls settings,
is divided into two modules: Turning on the Password function, and setting
a Password. The first step is to turn it on in the Password Mode setting.
Password Setup PagePassword Setup Page
Password Mode OnPassword Mode On On
Password
Password ModePassword Mode
2. Password Change
In the Password setup, you must first enter the current 6-digit passcode, and
then you have the opportunity to change it. The factory default passcode is .
Once you have changed and confirmed the password, press the ENTER button.
Password Setup PagePassword Setup Page
Password Mode OnPassword Mode On On
Password Change
Off
136900
Old Password
New Password
Confirm PWD
OK
Show below are two examples of Audio Setups.
1. Dolby Digital Setup
Audio Setup PageAudio Setup Page
Speaker Setup
Speaker Setup
SPDIF Setup
SPDIF
Setup
Dolby DigitalSetup
Dolby
Digital Setup
Channel Delay
Channel
Delay
Equalizer
Equalizer
3D Processing
3D
Processing
Go To Dolby Digital SetupGo To Dolby Digital Setup
Dual Mono
Use this function to set the input audio
signal to match your speaker setup.
Dolby Digital SetupDolby Digital Setup
Dual MonoDual Mono Stereo
Dynamic
Set StereoSetupSet Stereo Setup
STR
L-Mono
R-Mono
Mix-Mono
Dolby Digital SetupDolby Digital Setup
Dual MonoDual Mono STR Stereo
Dynamic
Dual Mono(1 + 1)SetupDual Mono(1 + 1) Setup
Dynamic
Use this function to change the setting
from the factory.
Dolby Digital SetupDolby Digital Setup
Dual MonoDual Mono STR
Dynamic
Set DRCOffSet DRC Off
L-Mono
R-Mono
Mix-Mono
FULL
3/4
1/2
1/4
OFF
Change PasswordChange Password
Please EnterOld PasswordPlease EnterOld Password
24
2. Equalizer Settings
Audio Setup PageAudio Setup Page
Speaker Setup
Speaker Setup
Spdif Setup
Spdif
Setup
Dolby DigitalSetup
Dolby
Digital Setup
Channel Delay
Channel
Delay
Equalizer
Equalizer
3D Processing
3D
Processing
Go To Equalizer PageGo To Equalizer Page
17
Equalizer PageEqualizer Page
EQ TypeEQ Type None None
Bass BoostBass Boost
Super BassSuper Bass
Treble BoostTreble Boost
Select EqualizerTypeSelect Equalizer Type
Off
Off
Off
Rock
Pop
Live
Dance
Techno
Classic
Soft
DVD Setup
EQ Equalizer Type
In this menu you can choose the desired preset
equalizer mode.
(Choose from Rock, Pop, Live, Dance, Techno,
ClassicorSoft)
Bass Boost
The Bass Boost function increases the volume
level of the bass frequencies.
Equalizer PageEqualizer Page
EQ TypeEQ Type None None
Bass BoostBass Boost
Super BassSuper Bass
Treble BoostTreble Boost
Select EqualizerTypeSelectEqualizer Type
Equalizer PageEqualizer Page
EQ TypeEQ Type None
Bass BoostBass Boost Off On
Super BassSuper Bass
Treble BoostTreble Boost
Rock
Off
Pop
Off
Live
Off
Dance
Techno
Classic
Soft
Off
Off
Off
DVD Setup
5. Disc Menu
Use the Disc Menu option to select the display
language for a DVD s disc menu display language.
(not the same as the players menu)
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Disc Menu.
4. Press the ENTER button.
5. Press the / buttons to select Disc Menu.
6. Parental
The Parental Control settings limit the player to only play content at or below a certain
movie rating. The ratings systems in different countries vary. In the USA, the Motion
Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.
In this menu item, you can set what is the highest level of rating you wish to allow the
unit to play.
Preference PagePreference Page
TV TypeTVTy pe
PBC
Audio
Subtitle
Disc MenuDisc Menu
Parental
Default
Preferred MenuLanguagePreferred MenuLanguage
Ntsc
On
ENG
ENG
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Super Bass
Super Bass Boost further increases the volume
level of the bass frequencies.
Treble Boost
Treble Boost increases the volume level of the upper
frequencies.
Boss BoostBoss Boost
Equalizer PageEqualizer Page
EQ TypeEQ Type None
Bass BoostBass Boost Off
Super BassSuper Bass Off
Treble BoostTreble Boost Off
Super BassSuper Bass
Equalizer PageEqualizer Page
EQ TypeEQ Type None
Bass BoostBass Boost Off
Super BassSuper Bass Off
Treble BoostTreble Boost Off
Treble BoostTreble Boost
1. Press the SETUP button when stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Parental.
4. Press the ENTER button.
5. Press the / buttons to select desired
parental level.
7. Default
On
Off
If you select RESET when in the DEFAULT settings
mode, all the settings of the Setup Menu will be
Preference PagePreference Page
TV TypeTVTy pe
PBC
Audio
Subtitle
Disc MenuDisc Menu
Parental
Default
Set Parental ControlSetParental Control
Ntsc
On
ENG
ENG
1KIDSAF
1 KID SAF
2G
2
G
3PG
3
PG
4PG13
4 PG 13
5 PGR
5
PGR
6R
6
R
7 NC17
7
NC17
8ADULT
8
ADULT
returned to the factory defaut settings, except for
Parental Level, Region and Password values.
1. Press the SETUP button when stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Default.
4. Press the ENTER button to select Reset.
On
Off
Preference PagePreference Page
TV TypeTVTy pe
PBC
Audio
Subtitle
Disc MenuDisc Menu
Parental
Default
Load Factory SettingLoad Factory Setting
Ntsc
On
ENG
ENG
Reset
18
23
DVD Setup
DVD Setup
Preference
1. TV Type
Choose the proper TV format appropriate to the
monitor you have connected to the player from
the following: NTSC, PAL or Multi type.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to TV Type.
4. Press the ENTER button.
5. Press the / buttons to select TV Type.
2. PBC (Play Back Control)
This feature is only available when a SVCD disc
is loaded. It allows you to disable or enable the
PBC (Play Back Control) menu of VCD discs.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to PBC.
4. Press the ENTER button.
5. Press the / buttons to select TV TypeOn/Off.
3. Audio
Use the audio language menu to select the subtitle
language that you prefer. If the disc you are playing
has that language available, it will display subtitles
in that language.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move toAudio.
4. Press the ENTER button.
5. Press the / buttons to select desired
audio language.
4. Subtitle
In the Subtitle menu, you can select a subtitle
language. Please note that subtitle will only
appear in this language if the disc programming
has included it.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Subtitle.
4. Press the ENTER button.
5. Press the / buttons to select desired
subtitle.
Preference PagePreference Page
TV TypeTVTy pe
PBC
Audio
Subtitle
Disc MenuDisc Menu
Parental
Default
Set TVStandardSet TVStandard
Preference PagePreference Page
TV TypeTVTy pe
PBC
Audio
Subtitle
Disc MenuDisc Menu
Parental
Default
Set PBCStateSet PBC State
Preference PagePreference Page
TV TypeTVTy pe
PBC
Audio
Subtitle
Disc MenuDisc Menu
Parental
Default
Preferred AudioLanguagePreferred Audio Language
Preference PagePreference Page
TV TypeTVTy pe
PBC
Audio
Subtitle
Disc MenuDisc Menu
Parental
Default
Preferred SubtitleLanguagePreferred Subtitle Language
Ntsc
On
ENG
ENG
Ntsc
On
ENG
ENG
Ntsc
On
ENG
ENG
Ntsc
On
ENG
ENG
PAL
Multi
NTSC
On
Off
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Thai
Others
Others
Video Setup
Picture Quality
In the Video Setup, you can make adjustments to various elements of the picture quality.
Video Setup PageVideo Setup Page
Component YUV
Component YUV
Quality
Quality
Divx VOD
Divx
VOD
Go TOVideo Quality SetupPageGo TOVideo Quality SetupPage
Sharpness can be adjusted by highlighting it in the menu and then using the
UP/DOWN arrow buttons to increase or decrease the sharpness.
Video Quality SetupVideo Quality Setup
Color MID High
Brightness
Contrast
Gamma
Hue
Saturation
Luma DelayLuma Delay
Color
00
00
None
00
00
1T1 T
Medium
Low
Brightness
Use this option to adjust the display brightness. When you reach desired
brightness level, use the / buttons and press the ENTER button.
Video Quality SetupVideo Quality Setup
Color MID
Brightness
Contrast
Gamma
Hue
Saturation
Luma DelayLuma Delay
Brightness
00
00
None
00
00
1T1 T
Video Quality SetupVideo Quality Setup
Color MID High
Brightness
Contrast
Gamma
Hue
Saturation
Luma DelayLuma Delay
Color
Brightness
Brightness
00
00
None
00
00
1T1 T
Medium
Low
0
22
19
DVD Setup
DVD Setup
Contrast
Use this option to adjust the contrast level.
Use the / buttons and press the ENTER button, when you reach the
desired contrast level. The contrast control increases or decreases the ratio of
bright and dark screen sections.
Video Quality SetupVideo Quality Setup
Color MID
Brightness
Contrast 00
Gamma
Hue
Saturation
Luma DelayLuma Delay
Contrast
00
None
00
00
1T1 T
Contrast
Contrast
0
Gamma
In some systems, you might experience a loss in the strength of the dark sections of
the displayed picture. This can be helped by changing the Gamma setting, which
boosts the dark level but leaves the other levels unchanged.
Video QualitySetupVideo Quality Setup
Color MID
Brightness
Contrast0000
Gamma None
Hue
Saturation
Luma DelayLuma Delay
High
Medium
00
Low
00
None
1T1 T
Saturation
Select screen saturation level using the direction / buttons and press the
ENTER button.
Video QualitySetupVideo Quality Setup
Color MID
Brightness
Contrast0000
Gamma None
Hue 00
Saturation 00
Luma DelayLuma Delay 1T1 T
Saturation
Saturation
Saturation
0
Luma Delay
Select the Luma Delay menu and select the preferred video image quality.
Video QualitySetupVideo Quality Setup
Color MID
Brightness
Contrast0000
Gamma None
Hue 00
Saturation 00
Luma DelayLuma Delay 1T1 T
Luma DelayLuma Delay
0T
1T1 T
Gamma
Hue
Select screen hue level using the direction / buttons and press the ENTER button.
Video QualitySetupVideo Quality Setup
Color MID
Brightness
Contrast0000
Gamma None
Hue 00
Saturation
Luma DelayLuma Delay001T1 T
Hue
Hue
Hue
0
20
21
Loading...