OWNER S MANUAL
Two Preloaded 8.8" Wide Universal
Replacement Headrest Monitors Package
H-88BK
AUX
M
H-88BG H-88GR H-88GRDK
11
DC 12V
9W
8.8 TFT-LCD
16:9 Wide
1440x234
3 AV Inputs(1 AV Input from front face)
Active Matrix TFT
Power Requirements
Power Consumption
Screen Size
Screen Format
Resolution Pixel
A/V Inputs
Dimensions
Carrier frequency:
LCD Panel Type
Compatible video standard
NTSC/PALAuto Select
SPECIFICATIONS
Note :This equipment has been tested and foundto comply withthe limits for
a ClassA digitaldevice, pursuant to part 15 of the FCC Rules. These limits
are designedto provide reasonableprotection against harmfulinterference
when theequipment is operatedin a commercialenvironment.
This equipmentgenerates, uses, andcan radiate radiofrequency energy and,
if notinstalled and usedin accordance withthe instruction manual,may cause
harmful interferenceto radio communications.Operation of thisequipment in
a residentialarea is likelyto cause harmfulinterference in whichcase the user
will berequired to correctthe interference athis own expense.
11.6(L)X8.7(W)X4.7(H)inches
A CH:914MHz B CH:915MHz
2
CAUTION 3
INSTALLATION 5
NAME AND FUNCTION OF EACH PARTS 6
Unit 6
Remote Control 7
PICTURE CONTROL 8
CONNECTIONS 9
HOW TO OPERATION THE MONITOR 10
How To Swivel The Monitor 10
How To Watch The Monitor 10
SPECIFICATIONS 11
Please read this User,s Manual in detail and use the set properly.
CONTENTS
3
CAUTION
Please read and observe all warnings and instructions in this owner s manual
and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
WARNING
WARNING
CAUTION
The lighteningflash with arrowhead symbol within an equilateral
triangle isintended to alert the user to the presence of
dangerous voltage within the product senclosure that may be
of sufficientmagnitude to constitute a risk of electric shock to
people.
The exclamationpoint within anequilateral triangle isintended
to alertthe user tothe presence ofimportant operating and
maintenance (servicing)instructions in theliterature accompanying
the product.
Installation ofall TV monitors
must beout of thedriver s
field ofsight.
Do nottry and servicethese
products yourself,Seek only
a qualifiedservice center or
factory servicecenter.
Be carefulnot to dropor
apply underpressure to the
front panelof your video
monitor. If thescreen cracks
due tomisuse, your warranty
will bevoid!
Do notmount the productwhere
it willobstruct the deploymentof
the airbagor in anarea where it
would affectthe vehicular control.
Also becareful to avoidmounting
the productwhere it canbecome
hazardous duringsudden stops or
in theevent of anaccident.
Use extracaution with anyliquids
in yourcar. If you oryour child
Spills anyliquid on theseproducts,
pull yourvehicle to theroadside
and turnthe key offto disconnect
or wipethe products witha towel. Donot
operate theequipment until allliquids have
either evaporatedor you havehad the monitor
inspected ata service centerby a qualified
technician, Severeharm or dangercan
Occur.
Use onlya damp clothto clean
the screenand use onlypurified
water onthe cloth. Wringout all
excess waterprior to wipingthe
screen. Donot use anycleaners
or chemicalsto clean thescreen.
In mostcases a drycloth will do!
P
O
W
E
R
A
V
MEN
U
,
,
10
HOW TO OPERATE THE MONITOR
POWER
How to Swivel The Monitor
You can adjust the swivel angle as shown below.
How to watch the monitor
UNIT
REMOTE CONTROLLER
1. Connect the monitor to the external devices.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
Press the same POWER button to turn the power off.
3. Turn on the external devices and view.
Make thisarrow to swivelthe monitor
AUX
M
CAUTION
4
Quality installationsare best
performed byqualified and
certifled installers.
Don ttouch the unitif there is
a flashof lightning. Itmay
receive anelectric shock.
Do notcover heater ductsor vents.
This maycause a fireor an electric
shock.
Watching the monitor for an
extended periodof time
with theengine turned off
may depletethe vehicle s
battery.
This productis designed for
operation witha 12 Volt DC,
negative groundvehicle. It
is notsuitable for operation
under otherconditions or
voltages.
1. The operating temperature of this product is limited to 14 F~140 F
(-10 C~60 C).
Your vehicle can reach temperatures up to 100 C in the summertime.
2. When your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle and for operating temperatures
to return to normal operating ranges. Your monitor will return to its normal
functions when these operating ranges are achieved.
3. Optimum picture quality is achieved when you are directly in front of the monitor
(+/-45 degrees).
4. If the buttons get stuck, please try to press the up of buttons, it will get back.
It won't impact using normal.
5. If you cann't find the files name in list when playing, please reset units or turn
off/on over again.
6. If the unit cann't be change mode when playing some special files which the
unit didn't support, please reset units or turn off/on over again.
CAUTION
Check Point
9
DVD/VCD/CD/CD-R/CD-RW/MP3
Reset
PLAY/PAUSE PREV NEXT STOP DVD REMOTE AV EJECT POWER A/VINPUT
CONNECTIONS
Video L-Audio -R Video L-Audio - R
DVD
Remote
Out
DVDInput
Video L-Audio -R
Monitor SubA/V OutputA
Monitor
Headphone
B
Monitor
Headphone
A
Power
VC-90T
AUX
M
AUX
M
RF Wireless Stereo HeadphoneRF Wireless Stereo Headphone
(A CH:914MHz B CH:915MHz)(A CH:914MHz B CH:915MHz)
AV2AV1
8
PICTURE CONTROL
To adjust CONTRAST, BRIGHTNESS, COLOR press the MENU button until you
arrive at the screen for that item. Use the arrow buttons to adjust the value. Press
the MENU button to make another adjustment or leave the MENU system.
Contrast/Brightness/Color
CONTRAST
BRIGHTNESS
COLOR
50
1. Bring up the on-screen function menu by pressing the MENU button on the unit
or the remote control.
2. Press the MENU button on the unit or the remote control of monitor until you see
the item you wish to adjust.
3. Use the arrow buttons to adjust the value.
4. Press the MENU button to make another adjustment or leave the MENU system.
50
50
INSTALLATION
Product installed
AUX
M
1. Remove the existing headrest from the seat.
2. Adjust the posts of the new headrest to fit the holes in the seat where the
headrest will be installed. The post can be moved together or apart
grasp one post in each hand, move the posts in opposing directions
(like they were walking) while pushing them toward each other or away
from each other.
3. Insert the cable in the proper hole. Insert the posts into the holes in the
seat and carefully work the headrest into position. Make sure the cable
is not pinched.
4. Run the cable down the seat and out to the location of the video source
unit (such as a DVD player).
5.
See the picture on the right and you can adjust
the distance between the tubes to required
space(pole width adjustments 4 ~ 8.2 .
)
AUX
M
5
How to use the Adapter tubes
Since the spacing of the mounting holes
can vary on different veicles we supply
two adapter tubes. Use these tubes when
the headrest mounting holes in your seat
are too large for the posts of the headrest
monitor.
6
NAME AND FUNCTION OF EACH PART
Unit
AUX
M
HEADPHONE JACK
Headphone output
Adjustable steel Pipe
PIPE
AUX Inputs
1 2 3456
7
8
8
8
A/V SourceAux.
7
NAME AND FUNCTION OF EACH PART
Interface Switch Function
Power Power ON/OFF
AV Signal Select
Menu Press this button for OSD menu.
And select menu option.
-
+
Increase current option value.
Decrease current option value.
POWER KEY
AV1 /AV2/ Aux K EY
+KEY
-KEY
MENU KEY
Remote Control
POWER
MUTE
SOURCE
123
456
789
0
SUB-T
ANGLE
TITLE
ZOOM PROG
MENU SETUP
ENTER
GOTO
SLOW
AUDIO P/N
DISPLAY A-B PBC
+
-
MENU
-
+
AV
MONITOR
and
among
Loading...