
OWNERS MANUAL PEAK6 (V)
2
Thank you for choosing the FAR PEAK6 (V) active two
way monitor.
In order to obtain the best performance from this active
monitor, please be sure to read this owner’s manual and
use your speaker only in accordance with its instruction.
CONTENS
• Applications 2
• Installation 3
• Technical description 4
• Technical drawing 7
• Limitor function 8
• Rear panel level 8
• Troubleshooting 9
• Optional remote control RCV 10
PEAK6 (V)
Applications
Video and film post production
Music industry
Radio stations
OBY VAN
All near field and close field applications

OWNERS MANUAL PEAK6 (V)
3
Thank you for choosing a FAR active monitor. This unit is
an exceptional product that will give you years of superb
performance.
Do Not Open The Cabinet.
Do not attempt to service this unit. Tampering with internal
components can cause fire or shock, and may void your
guarantee. If water or small objets enter the unit, unplug
the power cord immediately and consult an authorized
FAR dealer. Using the unit under such condition may
cause a fire or shock hazard.
Installation
Mains
Attach the plug to the IEC socket. And connect it to the
mains.
A green LED on front face indicates when the power is
switched on.
Signal
The input signal is available in XRL or Jack plugs, both
are electronically symmetric inputs.
The link functions the same as both of the inputs. Use the
link to connect one speaker to another
pins connections
• Maximum length of the link cables
symmetric :15 meters
asymmetric : 8 meters
• Maximum linked PEAK6 (V) ’s : 4

OWNERS MANUAL PEAK6 (V)
4
TECHNICAL DESCRIPTION
PEAK6 (V)
Sensitivity dB SPL
Maximum pressure level (2 cabinets @ 1 m) 114
Frequency Range Hz
± 3 dB
50-22000
Low pass section
Crossover frequency
3500 Hz 24 dB/Octave
High pass section
Crossover frequency
3500 Hz 6 dB/Octave
Bandpass filter
20-20000 Hz 6 dB/Octave
Limitor
(on/off) +2dB
Components
Woofer
18 cm / 7 inch
Tweeter soft dome
1 inch