Fantec QB-35U31R User Manual

Fantec QB-35U31R

4× 3.5"/2.5" HDD/SSD RAID-Case USB 3.1 Gen. 2

Manufacturer-Item-No. 2124

EAN 4250273421248

Fantec QB-35U31R

4× 3,5" or 2,5"(optional with QB-Bracket 25) HDD or SSD RAID-Case

USB 3.1 Gen. 2 with USB-Hub

Save your data on the Fantec QB-35U31R with room for four SATA-hard disks or

SATA-SSDs combined in two independent RAID-Systems. The QB-35U31R has

a USB 3.1 Gen. 2 interface which allows for a PC-connection with a maximum

speed of 10 Gbit /s. The USB-hub on the side offers two different USB-con-

nections: one Type A and one Type C. With the optional supply QB-Bracket 25

(Art.-Nr. 1993) SSDs can be used in the QB-35U31R as well.

The QB-35U31R allows for the usage of two RAID-sets in combination by choos-

ing between three different RAID-modes and (ex.: RAID 0 and RAID 1) or using

all four drives independently.

The Fantec QB-35U31R offers these RAID-modes:

RAID 0 STR (Striping) - allows for increased performance

RAID 0 SPN (Spanning) - combines different hard drives to one virtual drive

RAID 1 (Mirroring) - allows for high data security by writing data redundantly

SINGLE - the hard drives are used independently

3

2 4

6 7

80mm temperature-controlled Fan

1

USB Hub 3.1 Type A

2

USB Hub 3.1 Type C

3

Power Supply

4

USB Device 3.1 Type C

5

On-/Off-Switch

6

LED Display

7

Control Switch

8

1

5

8

Fantec GmbH Billwerder Billdeich 605B 21033 Hamburg, Germany Tel. [phone] Fax [phone]

fantec.de [e-mail] technical changes reserved

Fantec QB-35U31R

4× 3.5"/2.5" HDD/SSD RAID-Case USB 3.1 Gen. 2

Manufacturer-Item-No. 2124

EAN 4250273421248

Technical Data

Features

• HDD/SSD Case

• USB 3.1 Gen. 2 with a data transfer rate up to

10 GBit /s

• 4× 3,5"(8,89cm) SATA I/II/III-HDD – using

2,5" SATA-SSD is possible the optional supply

QB-Bracket 25 (Art.-Nr. 1993)

• Two RAID-two additional USB 3.1 connections:

1× Type A, 1× Type C

• RAID-Modi: RAID 0 Striping, R AID 0 Spanning,

RAID 1 Mirroring, Single

• Optimal cooling of the hard drives by a

temperature-controlled 80 mm fan and

improved air circulation

• UASP increases transmission speed

• SMART-values are limitedly readable in

RAID-mode

• Simple hard drive changing

• synchronisied shut-off on shut-down of the PC

• Status-LED display and control s at the front

side

• LED-Display for setup RAID-Mode, fan control

• Handles for easier hard drive removal

Interfaces

Data Interfaces:

• 4× SATA internal

• 1× USB 3.1 Type C to PC

• 1× USB 3.1 Hub Type C

• 1× USB 3.0 Hub Type A

Power Supply:

• 12V 5A

Operating System

• Microsoft Windows 7/8.1/10 (32/64bit)

• Mac OS X 10.13 or higher

Included Supply

• 1× USB 3.1 cable

• 4× hard drive handles

• 1× external power adapter

• 1× screwdriver

• Manual

Article Measurements

• 126 × 215 × 166 mm ( W × D × H)

• Net weight ~3,0 kg per piece

Logistic Data

• Retail Box Measurements

293 × 160 × 272 mm (W × D × H)

• Packgaging Unit Measurements

356 × 268 × 330 mm (W × D × H)

• Gross weight with Retail Box

~3kg per retail box

• Packgaging Unit

6 Pieces per box

• Total weight box

19 kg

• Country of Origin

Tai w an

Fantec GmbH Billwerder Billdeich 605B 21033 Hamburg, Germany Tel. [phone] Fax [phone]

fantec.de [e-mail] technical changes reserved