Fantasea Line 6023 User manual

1

Table of Contents

1. Introduction ........................................................................................................3

2. Installing and Removing Batteries.............................................................3

3. Turning the Nano Spotter On/Off............................................................... 5

4. Assembling the Cone and Multi-Colored Plastic Disks .......................5

5. Using the Nano Spotter as a Signaling Device...................................... 6

6. Using the Nano Spotter as a Back-up Light........................................... 7

7. Specifications...................................................................................................... 8

2

1. Introduction

The Nano Spotter is a new LED light from Fantasea, similar to
the old "Chemical Stick Lights", but reusable and much more
environmentally friendly. It is a perfect light for signaling and
messaging during night dives.
Included in the kit are the Nano Spotter light, hand lanyard,
white plastic cone with a lanyard and 4 color disks.

Cone

Cone

Lanyard

Flashlight

2. Installing and Removing Batteries

A. Prior to installing batteries, the white cone should be

Color
Disks

removed. Simply detach the cone from the flashlight’s

Hand

Lanyard

head by gently pulling them away from each other. Make
sure that when separating the cone from the flashlight,
there is no tension exerted on the cone’s lanyard, which is
wrapped around the flashlight.

3