Fantasea Action 700 Video Light User Manual

Fantasea BlueRay Action Video Light

(Cat. No. 6033)

Instruction Manual

The BlueRay Action Video Light is
a compact, durable and powerful
video light, which was designed to
enhance color and lighting in your
underwater videos and still
images. Its lightweight and
compact design allows it to be
comfortably integrated into any
underwater photo system, such as
with action cams, amphibious
cameras, compact digital housings and more. With a burn time of 160 minutes in full power, the
light can be used for a multiple dives without recharging between the dives. A battery power
indicator light around the power switch enables easy monitoring of the battery power. Adjustable
power output allows controlling the intensity of the beam in various compositions and diving
conditions, as well as extending the burn time of the light. Color temperature of the beam is slightly
warmer than daylight, which assists with producing vivid and colorful videos without having to use
any color correction filters. The light features a wide beam angle of 75 degrees, making it suitable
to light a wide range of compositions. Depth rated to 100 meters/330 feet, the BlueRay Action

Video Light fulfills the needs of both recreational and technical divers.

Specifications

 Depth ratio: 100 meters / 330 feet
 Maximum output: 700 lumens
 Beam angle: 75 degrees
 Material: Aluminum head, Polycarbonate body
 Battery requirements: 1 x 18650 Li-ion battery or 2 x CR123 batteries
 Burn time: 160 minutes at 100% power
 LED Lifespan: 30,000 hours
 Color temperature – approx. 6,000K
 Operation modes: 100% / 50% / 30% power, SOS signal and fast flashing
 Power indicator: Green (100%-60% power), Yellow (60%-30% power),

Red (30%-15% power), Flashing Red (15%-1% power)

 Dimensions: 37 x 157 mm (diameter x length)
 Weight: 156g (without battery)
 Includes: Hand lanyard and instruction manual
 Optional YS Mount available – BlueRay YS Mount A (Cat. No. 4028)
 Optional Red Filter available - RedEye Filter ORF37 (Cat. No. 5188)

1

Fantasea BlueRay Action Video Light Instruction Manual 20121223

1 4 3 2 1

2

3

4

Identification of BlueRay Action Video Light Parts

LED Head

Power Switch

Battery Indicator Light

Hand Lanyard Insert Slot

Instructions for Use

A. Installing & Removing Batteries

a. Please read the following information and warnings prior to purchasing and installing

batteries inside the BlueRay Action Video Light:

i. Only 2 x CR123/CR123A 3-Volt Lithium batteries or a single 18650

rechargeable 3.7-volt Li-Ion battery should be installed inside the light.

ii. Installation of rechargeable CR123 Li-on batteries inside the light is strictly

forbidden, as this will burn out the light and may cause irreparable damage.

iii. If installing an 18650 battery inside the light, make sure that it features a

protective circuit board (PCB). 18650 batteries with a protective circuit board
are also known as 19670.

iv. Warning! Lithium-ion batteries can explode or cause a fire if they are used

incorrectly or if they are defective. Therefore, you are recommended to read
the following instructions very carefully:

1) Each time before using the battery, carefully check the battery and in

particular the protective seal/casing to make sure that it is undamaged and
intact. If in doubt, take the battery to a chemical waste disposal facility.

2) Always handle the battery with care. Never drop the battery!

3) Store the battery in a safe and dry place and keep the battery away from

all metal objects.

4) Never expose the battery to temperatures above 100 degrees Celsius.

5) Only use chargers that have specially been designed for use with lithium-

ion batteries.

6) When charging batteries, keep the charger away from highly flammable

materials or products and never leave the charger unattended when in
use.

7) Please follow the guidelines and restrictions of the batteries you purchase

in order to avoid any damage.

b. To open the BlueRay Action Video Light, hold the hand grip firmly in one hand with the

hand grip pointing towards your body and the LED head pointing away. Turn the LED head
clockwise until it separates. Pull the LED head off.

2

Fantasea BlueRay Action Video Light Instruction Manual 20121223