Fanimation Vetricco FP3120 Series Specification Sheet

The Vetricco

FP3120 Series

®

SPECIFICATION SHEET

Product Specifi cations subject to change

The Vetricco® Fan Assembly – FP3120**

5¾˝dia

16½˝

12˝

square

15° Blade Pitch

Blade Sweep

24˝ Blade = 60˝

Net Hanging Weight: 35 lbs

Ceiling

Floor

Dimensions shown in inches

A

15˝

(w/6˝dr)

7´ min

Available Finishes

GB Glossy Black/Chrome Balls

SN Satin Nickel/Chrome Balls

Distance from Ceiling

to Bottom of Fan

Fan w/6˝ downrod 23˝

Fan w/12˝ downrod 29˝

Fan w/18˝ downrod 35˝

Fan w/24˝ downrod 41˝

Fan w/36˝ downrod 53˝

Fan w/48˝ downrod 65˝

Fan w/60˝ downrod 77˝

Fan w/72˝ downrod 89˝

A

INSTALLATION REQUIREMENTS:

Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.

ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 220 VAC, 50 Hz version is
available.

FAN SPEEDS:
3 fan speeds with reversing switch (on top of the motor). High – 150 rpm; Med – 115 rpm; Low – 75 rpm

CONTROL OPTIONS:

The hand-held remote control (C26) and canopy-style receiver unit (RECAN68UD) are included. Push button control
with frequency code settings located on both the transmitter and the receiver units. Each push button unit will consist of
3 separate fan speeds, infi nite light levels, and off button. Reversing switch located inside fan housing on upper socket
housing. Optional controls are: C2 wall control; C9 wall control used with canopy receiver. Installation and operating
instructions provided with control. Installation and operating instructions provided with control.

LIGHTING OPTIONS:

The 3-bulb (40 watt max) uplight and 3-bulb (40 watt max) downlight fi xtures are included with this fan assembly with a
maximum of 240 watts (candelabra bulbs - not included). Maximum uplight and downlight wattage not to exceed 240
watts.

DOWN ROD OPTIONS:

The Vetricco® fan comes with a standard 6˝ down rod. Optional down rods are available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝,
and 72”. For installations requiring a longer down rod, a down rod coupler is available. The Vetricco® fan can be mounted
on a sloped ceiling up to 30°. Most sloped ceiling installations require a down rod longer than the standard 6˝ down rod.
Optional sloped ceiling ball kits (SCB52) are available for up to 52°. Call tech support for more information.

BLADE SETS:

A set of 3 plastic blades are included with this fan.

DAMP LOCATION:

Fan not rated for Damp Location usage.

10983 Bennett Parkway

Zionsville, IN 46077

Toll Free [phone]

FAX [phone]

Outside U.S. call [phone]

Copyright 2007 Fanimation, Inc. 2007/12

Visit Our Website www.fanimation.com