Page 1
PICKETT
™
FP7996**
Ceiling Fan
5.91˝ dia
A
13° Blade Pitch
Blade Sweep= 52˝ dia
Net Hanging Weight: 23.15 lbs
B
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction
box capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15
amp circuit.
MOTOR SPECS:
172 x 17 AC motor is designed for optimal performance
with this fan.
BLADES:
A set of four 24.5˝ composite blades is included.
Fan w/4.5˝ downrod
Fan w/12˝ downrod
Fan w/18˝ downrod
Fan w/24˝ downrod
Fan w/36˝ downrod
Fan w/48˝ downrod
Fan w/60˝ downrod
Fan w/72˝ downrod
15.06˝
22.56˝
28.56˝
34.56˝
46.56˝
58.56˝
70.56˝
82.56˝ 80.67˝
Available Finish
BLBNW
BLBSW
Fan Speed Max RPM CFM
High
Med
Low
Power
(Wave)
41 4228 11 104
Black with Brushed Nickel Accent
and Black Blade
Black With Brushed Satin Brass Accent
and Black Blade
Airflow / Energy Efficiency Info (120V)
CFM / Watts
135 6270 0.56
96 4292 0.40
53 2387
Energy Guide FTC
Total Air Delivery
(CFMave)
95
130
199
Estimated Yearly
Energy Cost ($)
Amps Watts
Ceiling Fan
BA
13.17˝
20.67˝
26.67˝
32.67˝
44.67˝
56.67˝
68.67˝
66
33
120.24
Efficiency
(CFM/W)
LIGHTING OPTIONS:
One 18-watt LED included.
Bulb Type Watts Lumens Amount Color Temp CRI
LED
Light Bulb Information (120V)
18 1440 3000 80%
CONTROL OPTIONS:
CW60WH-7996 wall control is included. Switch control has 3 fan speeds, infinite light levels and off button. The reverse
switch is on the motor housing. Optional CW1SW and CW2 wall conrtols available—sold separately. Optional BTCR9
and CRL4WH remote controls with receiver unit and BTR9 receiver unit are available—sold separately. Instructions are
provided with each control.
DOWNROD OPTIONS:
Fan comes with 1˝ dia. x 4.5˝ long wet-location downrod (DR1SS-45). Optional wet-location downrods are available in 12˝,
18˝, 24˝, 36˝, 48˝, 60˝, and 72˝ lengths. A downrod coupler is available for installations requiring a downrod longer than 72˝.
Fan can be mounted on a sloped ceiling up to 27°. Most sloped ceiling installations require a downrod longer than the
standard 4.5˝downrod. Optional sloped ceiling ball kits (SCB1-52) are available for slope angles greater than 27° and up to
42°. Optional close-to-ceiling kit is available as well—sold separately. Call technical support for more information.
LOCATION USE:
Fan is rated for dry, damp and wet locations.
Loading...