Fanimation KW10052 Installation & Assembly

WC2WH Wall Control

SPECIFICATION and INSTRUCTION SHEET

DESCRIPTION: Single 3-speed ceiling fan control with light dimmer switch
ELECTRICAL SPECS: 120V, 60Hz Ceiling Fan
FAN MODELS USED: most Fanimation fans - see catalog or visit our website, fanimation.com

for more information

How to Wire and Operate Your Wall Control

NOTE: If fan or supply wires are different colors than indicated, have this unit installed by a qualified electrician.

WARNING

To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring.

1. Connect wires using connectors as shown in Figure 1.
Make wire connections and secure with wire nuts

supplied.

• Connect the Black wire from the wall-mounted
control with the wire from the wire of A. C. power
supply.

• Connect the Black wire from the wall-mounted
control with the Black wire from the ceiling fan.

• Connect the Blue wire from the wall-mounted
control with the Blue wire from the ceiling fan.

• Connect the green/yellow wire from the ceiling fan
with the ground wire.

2.

Attach wall control unit to outlet box using the two
screws provided. Then, attach face plate to the wall
control. (Figure 2)

• Restore electrical power.

3. Operating Wall Control: (Figure 3)

- Indicator LED light

- Fan off

- Fan speed control: Turns on fan and turns speed
up or down.

- Turns light ON/OFF.

AC IN N

YELLOW & GREEN

BLACK

BLUE

YELLOW & GREEN

BLACK

BLUE

Figure 1

Face Plate

NOTE: Supply wires and fan wires

omitted for clarity.

Figure 2

TO MOTOR L

Screw

GROUND

BLACK
AC IN L

FOR LIGHT

Outlet Box

- Light Dimmer: Up or down to brighten or dim
light.

- Pull out to turn all power off.

WARNING

To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and

not pinched between the wall plate and the wall.

WARNING

Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan unless blades are in place. Noise and fan damage

could result.

10983 Bennett Parkway

Zionsville, IN 46077

[phone] • FAX [phone]

Outside U.S. call [phone]

WWW.FANIMATION.COM

Figure 3

Copyright 2018 Fanimation

2018/12 V.01