Falconeyes SS-200M, SS-250M, SS-150M Instruction Manual
IM1012_SS-M_eng
F) Attentions
Instruction Manual
3
E) Specification
SS-M Series
Studio Flash
Model No.
Color Temperature
Voltage
AC 110-120V 60Hz / AC 220-240V 50Hz
Flash Power
Power Range
Modeling Lamp Power Range
Recycle Time
Flash Duration, T=0.5
Flash Triggering
Fuse
Weight
SS-150M / SS-200M / SS/250M
3A
5300~5500K
Stepless: 1/8 ~ Full
Test Buon; Sync Cable; Photo Sensor
1/500~1/800S
SS-150M
150Ws
60W
30
1kg
SS-200M
200Ws
60W
35
1kg
40
SS-250M
250Ws
60W
1.2kg
Since there could be high voltage inside the unit, please DO NOT
open or repair the unit yourself. If there is any defect, please contact
the experienced technician.
Avoid strong light directing to the photo sensor.
For better maintenance, if the unit has been triggered continuously 10
times in a short period please leave the unit dormant 2 minutes.
Please ensure the power is switched off after use.
Guide No.(ISO100/m)
2-5.5 sec
B) Accessories
A) Features
1 2
C) Major Parts and Control Panel
D) Operations
1.Power cord 2.Sync cord 3.Fuse (2pcs)
4.Instruction booklet 5.Modeling lamp
1
2
3
4
5
6
7
8
Make sure the “Power” button and “Model” button are on “off” position.
And The power control dial is pointing at 1/8 position.
Connect the power cord and turn on the “Power” switch, then a red “Power
Light” will be on. When the unit is properly charged, the green “Ready
Light” will be on.
You can turn the modeling lamp on or turn off with the “Model” switch. You
can also adjust the power output by turning the dial from 1/8 to full.
There is a beeper indication during the recharging process.
After use, please turn off the “Model” switch first, then, the“Power”
switch.
9
10
11
12
13
17
18
16
15
14
1.
2.
3.
4.
5.
6.
7.
8.
9.
Body
Flash Tube
Modeling Lamp
Reflector
Stand Fixing Screw
Light Stand Holder
Angle Lock Screw
Umbrella Holder
Charging Indicator Light
1.
2.
3.
4.
5.
SS-M Series, with modern designed of housing are inevitable studio
flashes for professionals as well as amateurs. They have high compatibility
to our current accessories for SS series flashes such as softboxes,
reflectors, honeycombs, barndoors, etc. Moreover, the studio flash is
produced with heat resistant material and equipped with advanced circuitry
design, thus it is relatively stable and with short recharging time.
Test Button
Modeling Lamp On/Off Switch
Fuse Holder
AC Power Insert
Sync Socket
Power Control Dial
Remote On/Off Switch
Power On/Off Switch
10.
11.
12.
13.
14.
15.
16.
17.
18.
Photo Sensor
Loading...