Falcon Eye DRC-4CPN2 User Manual

User Manual

Door Camera DRC-4CPN2

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

6. Specification

specification

Model

DRC-4CPN2

Image Sensor CMOS 1/4"
Power source 12V (supplied from the Monitor)
Wiring(household) Polar 4 wires
Call mode Duplex
Camera angle horizontal angle 47°, vertical angle 34°
Format NTSC or PAL STANDARD
Horizontal /vertical Frequency 15.734㎑ / 60㎐ , 15.625㎑ / 50㎐

Lamp Built-in white LED (automatically turns on in night)
Low illumination 0.1 LUX (Up to 300mm in front of the camera)
Workable temperature -10℃ +50℃
Dimension(mm) 50(W) x 118 (H) x 25.5(D)
Weight(g) 250g (B/K included)

13

Contents

1. Introdution..................................................... 2

2. Important Safeguard..................................... 3

3. The names & Functions of Each Part............ 4

4. Wiring & Installation....................................... 6

5. Package....................................................... 11

6. Specifications............................................... 13

1

1. Introduction

Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the
unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided
below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.

Model No. Serial No.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

This symbol is intended to alert the use to the presence of uninsulated “dangerous Voltage”within the product’s enclose that
may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the
literature accompanying the appliance

caution

Rosk of electric shock

do not open

CAUTION: To reduce the risk of electrix shick, do not remove cover(or back) no user-serviceable

part sinside refer servicing to quaured service personnel

2

2. Important Safeguards

▲

Damage Requiring Service: This equipment from the power source and source and refer servicing to qualified service personnel under the following

conditions:

ⓐ when the power is damaged.
ⓑ if liquid has been spiled or objects have hallen into the unit
ⓒ if the equipment has been exposed to rain or water.
ⓓ if the equipment has beem dropped or otherwise damaged.

▲

Water and Moisture: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundru tub, in a wet basement, or near

▲

Accessories: The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any mounting of the manufacture’s

▲

Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts

▲

Lightning: For added protection for this product before a lihgtning storm, or when it is left un attached and un used for long periods of time, unplug it from

insturctions, and should use a mounting accessory recommended by the manufacturer.

the wall outlt and disconnect the other system. This will prevent damage to the product due to lightming and power-line surges. If you live in an
ared heavily prone to lightning stoms, it is recommended that you invest in power-line, telephone-line, RFcable and actuator/ polarization surge
protectors to protect your appliance system from possiple damage

ⓔ when the equipment exhibits a distinct change in performance- this indicates a need for service.

a swimming pool, and the like.

that could result in a fire or electric shock. Never spill liquid of any kind on the product.

3

3. The names & Functions of Each Part

▶

Front sid

4

▶

Back side

① Speaker : Transmit sounds from the household.
② Camera Lens : keep cleaning up from dust or foreign substances.
③ LED Lamp : The LED lamp is turned on for clear view during night.
④ Page Button : Used to page the household
⑤ Microphone : For use when communicating with the household
⑥ Mounting Holes
⑦ Monitor cable : Connect with household monitor after matching up the polarity
⑧ Door release cable : Connect with door release switch
⑨ Volume control : Used to adjust speaker volume

5

4. Wiring & Installation

1. Align holes on the wall where the unit is to be installed with mounting brackets hole and
secure.
FIG-1 : Install the camera at a 30˚angle to the left
(install the bracket in reverse to angle 30˚to the right)
FIG-2 : Install the camera at a perpendicular angle to the front

2. Wire the household monitor cables as shown below with matched polarity as picture
below[FIG-3]
(#1:RED/VOICE, #2:BLUE/GND, #3:YELLOW/DC12V, #4:BLACK/VIDEO)

3. Wire the door release cable as shown in the diagram.[FIG-3]

4. Tighten using bolts and a wrench, then cover using the AL. screw covers.

6

▶

[FIG-1]

▶

[FIG-2]

7

▶

[FIG-3]

8

#1: RED(VOICE)
#2: BLUE(GND)
#3: YELLOW(+12V)
#4: BLACK(VIDEO)

You can adjust speaker volume using driver as shown below. [FIG-4]

▶

[FIG-4]

9

● Please refer to the below images regarding the installation position of the product.

34

60cm

10

5. Package

11

12

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com

Printed In Korea / 2013.02.105