
LCD
Display
Arm/Disarm/Alarm
status LED
Arming
Keys
Quick User Guide
Power/Tro uble
LED
Alpha
numeric keys
Service
Call
PGM On/Off Keys
S.O.S Panic Alarm
Reject
Key
Accept
Key
Menu
Navigation Keys

Thank you for choosing CommPact wireless intruder control panel. This quick start
guide describes the main user operating actions of the CommPact . To view the full
version of the user manual, please refer our website www.electronics-line.com.
Full Arm
Press
Partial Arm
Press
If required, enter
your user code
Perimeter Arm
Press
Disarm Enter your user code In addition,
silences the siren
in alarm event
Panic alarm
Fire alarm
Medical alarm
Check system troubles
Press and hold down
Press and hold down
Press and hold down
Press
and scroll the list
+
+
+
Additionally,
silences any
trouble tones
Global Chime
Press
Access Menu Mode
Service Call
Turn On / Off PGM
Press
Press
/ 30
then [User Code]
and then hold
2

LEDs Indication
LED:
Off: System disarmed
Green : System armed
Flashing red : Alarm
Edit/Delete User Code
'OK' LED:
Green: Power OK
Yellow: System trouble
Flashing green: Open zone
Flashing yellow: (Slow) Low
battery, (Fast) AC loss
In case o
to identify the problem.
stem Trouble, press
1. From the main display press .
2. Enter master code (Default code 1234)
3. Select [4] User Code and press
Bypass / Unbypass a zone
1. From the main display press
.
2. Enter master code (Default code
1234)
3. On the Main menu, press [21]
SMS Control Commands
Controlling the System through SMS
Command Code Numbers:
120: Disarm
121: Full arm
122: Part arm
4. Select a user and press
5. Select [1] Edit Code.
6. Edit the user code or enter 0000 to delete
7. Press
4. Select a zone and press
5. To save the status, press
123: Perimeter arm
030: PGM off
130: PGM on
200: System arm status
toggle
to
SMS Structure: [Free text - Up to 43 characters][#][User Code][Command]
3

Example: DISARM#1234120
Telephone Control Commands
1. Dial the number of the premises
If your system is connected to a regular phone line dial the number of the panel
and wait for three rings then hang up. Wait at least five seconds and dial the
number again. On the second ring the control system
tones.
answers and sounds two
If your system supports cellular communication dial and wait until the system
answers
2. Within 15 seconds, enter the Telecontrol Code (code 29). After a tone sounds, press:
3: Full arm
6: Disarm
7: Extend the call
9: Cancel siren
2: 2 Way Audio
Keyfob
: Full Arm
: Disarm
and two tones are heard.
430: PGM on
530: PGM off
*#: Disconnect the line
: Part Arm, PGM
/ : Perimeter Arm, PGM
Connecting to your Web Browser Application
1. Enter the Web page address supplied by your Web service provider
and press Go
2. Login page:
a. User name and Password – Enter values supplied by your
b.
3. Click the Enter button
Electronics Line 3000 Ltd. 05/2011 5IN1507 B
.
Web service provider.
Passcode – Enter your CommPact user code
4