Falcon SSG500VA-1 Owner's Operating Manual

OWNER’S
OPERATING
MANUAL
UNINTERRUPTIBLE POWER SYSTEM
FOR MODEL:
FALCON ELECTRIC INC.
5106 Azusa Canyon Road
Irwindale, California 91706
Tel. 626 962 -7770 Fax. 626-962-7720
Email: sales@falconups.com
www.falconups.com
2001 FalconElectric Inc. All rights reserved. All other brand names and trademarks are the property of their respective owners. The information and specifications stated in this document are subject to change without notice. 2001- 10-18 Falcon, Falcon Electric and UPS Plus logos are registered trademarks of Falcon Electric Inc.
OM48017A
INTRODUCTION
Congratulations! You have selected the highest quality protection for your computer today. This unit offers a quiet and compact package with superior performance you can count on. You now own a member of the SSG family which is a proud part of the very reliable and versatile Falcon series of UPS products.
This Users Manual is provided with your new SSG unit. It will enhance your understanding of the product and its functions. Read this handbook carefully in the order it is presented prior to operating your unit. This will save you time and effort in your installation and application. The illustrations will also familiarize you with the SSGs operating modes and indications. Always operate the unit within the guidelines and specifications given to
IMPORTANT SAFETY
maximize the units efficiency and lifetime. Also, your understanding of the product is essential in providing you years of service for your back -up power requirements. Refer to the cross-reference table below to understand which unit corresponds to your particular model number.
CROSS REFERENCE TABLE
MODEL NUMBER OLD REFERENCE
SSG500VA -1 PC500-1
INSTRUCTIONS,
SAVE THESE
INSTRUCTIONS
This manual contains important sa fety instructions that should be followed during installation and maintenance of the UPS and batteries.
OM48017A
The SSG SERIES represents the
W/ ISOLATION
smallest and most compact units of the Falcon (UPS) product line. In the tradition of all Falcon products, it maintains the highest reliability and the most complete on-line, sinewave power protection available. An on-line, sinewave UPS is the only total solution to virtually any power problem. It effectively provides just what it says, Uninterruptible Power. There is no break, transient or glitch in source transfer on a power outage because THERE IS NO TRANSFER.
The SSG is engineered with the latest MOSFET/PWM technology for high efficiency and reliability.
Refer to the simplified block diagram, Figure 1, for system description. The AC source is rectified and provides energy for the DC - DC Converter and a float charge to a standby Battery. The DC Converter then supplies the power to operate the PWM DC/AC Inverter. During a utility power-loss, the AC rectification and battery charging capabilities of the UPS become inactive. The fully charged battery, however,
supplies the necessary power requirement to maintain the remaining system blocks. The SSG on-line topology is unique to other on-line systems in that it is designed to meet the needs of non­linear loads. Your computer, with its switching power supply, is considered a nonlinear load which can be very abusive to most power protection equipment and could decrease its life­expectancy. The SSG is specially devised to accept these loads and protect them efficiently without any of the output waveform degradation common to other UPS.
If the unit inadvertently experiences an extreme over temperature situation that causes inverter malfunction, it will switch over to a filtered emergency bypass line to insure continuous power to the computer load. If the unit is overloaded, it will shutdown completely if the overload is not corrected within 15 seconds.
The SSG500 offers complete isolation input to output.
DC-DC
CONVERTER
SSG500 BLOCK DIAGRAM
OM48017A
Loading...
+ 6 hidden pages