Falcon Pro-Lite LD32, Pro-Lite LD36, Pro-Lite LD35, Pro-Lite LD33, Pro-Lite LD38 Installation And Servicing Instrucnions

Installation and Servicing Instructions

for

LD32, LD33, LD35, LD36, LD38 and LD39 DRY BAINS MARIE

LD34, LD37 and LD43 WET BAINS MARIE

Important Installation Information

The installer must ensure that installation of the unit(s) is in conformity with regulations in force at the time.
For the UK, particular attention requires to be paid to:-

BS7671 IEE Wiring Regulations
Electricity at Work Regulations
Health and Safety at Work Act
Fire Precautions Act

The unit has been CE-marked on the basis of compliance with the Low Voltage and EMC Directives for the voltage
stated on the data plate.

WARNING: THIS APPLIANCE MUST BE EARTHED!

Preventive Maintenance Contract

In order to obtain maximum performance from the equipment, we would recommend that a maintenance contract be
arranged with

AFE Serviceline.

Visits may then be made at agreed intervals to carry out adjustments and repairs. A quotation for this service will be
provided upon request. Contact

AFE Serviceline

as detailed below

:-

Tel: [phone] Fax: [phone]

Falcon Foodservice Equipment

Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.
e-mail: [e-mail]

T100330 Ref. 2

C = Countertop Unit B = Base Unit

F = Freestanding Unit S = Stand Mounting Unit

Power Ratings at 230V AC

Type Width Depth Height Vertical Clearance Side/Rear Cl. Power Rating Fuse Rating

LD32 Dry Bain Marie

Model

C 300mm 600mm 285mm 600mm 150mm 0.48kW 3 amp

LD33 Dry Bain Marie

C 300mm 600mm 285mm 600mm 150mm 0.48kW 3 amp

LD34 Wet Bain Marie

C 350mm 600mm 285mm 600mm 150mm 1kW 5 amp

LD35 Dry Bain Marie

C 450mm 600mm 285mm 600mm 150mm 0.75kW 5 amp

LD36 Dry Bain Marie

C 450mm 600mm 285mm 600mm 150mm 0.75kW 5 amp

LD37 Wet Bain Marie

C 450mm 600mm 285mm 600mm 150mm 1kW 5 amp

LD38 Dry Bain Marie

C 300mm 600mm 285mm 600mm 150mm 0.48kW 5 amp

LD39 Dry Bain Marie

C 600mm 600mm 285mm 600mm 150mm 0.75kW 5 amp

LD43 Wet Bain Marie

C 600mm 600mm 285mm 600mm 150mm 2kW 13 amp

Weight

12kg

12kg

15kg

13kg

13kg

18kg

12kg

14kg

20kg

Technical Installation Information Table

Note

* 13A Fuse Rating:

The unit must be protected by a 13 amp fuse if a 13 amp plug is used.

If another type of plug is used, a 15A fuse requires to be used in the plug,

adaptor or distribution board.