Falcon PREDATOR XL2 Owner's Manual
FALCON
WOR LD CLASS SE CUR ITY
FALCON PREDATOR XL2
Vehicle Security System with Anti-Hijack
Owner’s Manual
HELPLINE: 0906 700 10 20
(All calls charged at 50p/min)
Falcon Security Ltd. Unit 9 Tanning Court, Warrington, Cheshire, WA1 2HF, UK
Internet: http://www.falcon-security.com Email: support@falcon-security.com
112005
- 2 -- 2
FALCON
WOR LD CLASS SE CUR ITY
FALCON PREDATOR XL2
Vehicle Security System with Anti-Hijack
Owner’s Manual
REMOTE ARM..................................................................................3
REMOTE DISARM............................................................................3
SILENT ARM....................................................................................3
SILENT DISARM..............................................................................3
TRIGGER MEMORY - LED INDICATOR..........................................3
SYSTEM STATUS - LED INDICATOR.............................................3
CLEAR THE TRIGGERS AND SYSTEM ALARMING ..........................3
TRIGGER AND THE SYSTEM ALARMING ........................................4
PANIC MODE...................................................................................4
EMERGENCY OVERRIDE .................................................................5
VALET MODE .................................................................................. 5
CAR FINDER....................................................................................5
SHOCK SENSOR TEMPORARY BYPASS.......................................... 5
MANUAL ARMING ...........................................................................5
01. System Status Memory ............................................. 3
02. Operation of the Remote Control................................. 3
03. Basic Functions ........................................................ 3
04. Code Learning of Remote Control................................ 5
05. Programming Option Features .................................... 6
06. Option Features Table ............................................... 7
07. Explanation of Option Features................................... 8
- 3 -- 3
01. System Status Memory
The system will enter the same mode after powering on as when it was powered off.
02. Operation of the Remote Control
BUTTON ARMED DISARMED IGNITION ON
BTN#1 once ARM ARM DOOR LOCK
BTN#2 once DISARM DISARM DOOR UNLOCK
BTN#1 3sec. PANIC PANIC
BTN#3 2sec. BOOT RELEASE BOOT RELEASE BOOT RELEASE
BTN#4 once CAR FINDER CAR FINDER
BTN#1+2 once SILENT DISARM SILENT ARM ANTI HIJACK
BTN#3 then #1 CH3 CH3 CH3
03. Basic Functions
Remote Arm
With the system disarmed and ignition off, press button #1 once, the siren will chirp once and the hazard lights flash
once to confirm entering the arm mode.
*The siren will not chirp if programming the Option Features item #1 OFF.
Remote Disarm
Pressing button #2 once with system armed will disarm the system and the siren will chirp twice and the hazard lights
flash twice to confirm the alarm is disarmed. The siren will chirp 4 times if the system has been triggered during the
arm mode.
Silent Arm
Pressing buttons #1+2 once with system disarmed and ignition off will arm the system without siren chirp.
Silent Disarm
Pressing buttons #1+2 once with system armed will disarm the system without siren chirp. The siren will still chirp 4
times if the system has been triggered before disarming.
Trigger Memory - LED Indicator
When disarming, if the system was triggered whilst armed the siren will chirp 4 times, hazard li ghts flash 2 times and
the LED will flash to indicate the triggered zone as follows:
1 flash = Shock Sensor 2
nd
stage trigger
2 flashes = Bonnet Trigger
3 flashes = Door Trigger
4 flashes = Ignition Trigger
System Status - LED Indicator
No Light = Disarm
Slow Flash = Arm
Fast Flash = Auto Rearm/Passive Arming/Anti-hijacking
Steady Light = Valet Mode
Clear the Triggers and System Alarming
When the system is triggered the hazard lights will flash and the siren will sound the cycle duration as per the setting
of option feature #14.
Press button #1:
When the system is triggered with the siren sounding and hazard lights flashing, press button #1 once and the siren
and hazard lights will both stop and then:
- The siren will chirp once
- The hazard lights will flash once
- The doors will lock (if connected)
- The LED will flash to indicate the triggered zone
- The system will remain in the armed mode.
- 4 -- 4
Press button #2:
When the system is triggered with the siren sounding and hazard lights flashing, press button #2 once, the siren and
hazard lights will both stop and then:
- The siren will chirp 4 times
- The hazard lights will flash twice
- The doors will unlock (if connected)
- The LED will flash to indicate the triggered zone
- The system will enter disarmed mode
By override mode:
If the remote control doesn’t work properly then overriding the system will clear the trigger and disarm the system.
Trigger and the System Alarming
The system will respond as follows if the system is triggered under armed mode: (When the system is triggered, the
siren sounding cycle will be 30sec., 60sec. or 8 cycles of 30sec. depending on the setti ng of Option features #14)
Shock sensor 1
st
stage triggered:
Light impact will activate the 1st stage of the shock sensor and the siren will chip 3 times to warn. If Option Feature #2
is programmed as ‘FIRST’ then the shock sensors 1
st
stage will be bypassed after 3 consecutive triggers until the
system is disarmed and armed again.
Shock sensor 2
nd
stage triggered:
Heavy impact will activate the 2
nd
stage of the shock sensor. The siren will sound and the hazard lights will flash for
one cycle. If Option Feature #2 has been selected as ‘BOTH’ then the 1
st
and 2
nd
stage of the shock sensor will be
bypassed after each stage has been triggered 3 times continually until the system is disarmed and armed again.
Bonnet opened and then closed:
The siren will sound and the hazard lights will flash for one cycle.
Bonnet opened and not closed:
The siren will sound and the hazard lights will flash for 3 cycles and the bonnet switch will be bypassed until it is closed.
Door opened and then closed:
The siren will sound and the hazard lights will flash for one cycle.
Door opened and not closed:
The siren will sound and the hazard lights will flash for 3 cycles and then the door input will be bypassed until all doors
are closed.
Ignition Acc. turns on and then off:
The siren will sound and hazard lights will flash for one cycle.
Ignition Acc. turns on and not off:
The siren will sound and the hazard lights will flash for 3 cycles and then the Ignition Acc. will be bypassed until it is
turned off again.
Panic Mode
With the system armed:
Press button #1 for 3 seconds and the siren will sound and hazard lights flash for one cycle. The system will remain
armed.
With the system disarmed:
Press button #1 for 3 seconds and the system will arm and then the siren will sound and the hazard lights will flash for
one cycle. The system will remain armed.
*During the panic mode, pressing button #1(#2) will
interrupt the panic mode and arm (disarm) the system.
Loading...