![](/html/b2/b246/b246cfc219e817b2ebc8475fd944cee3cd2aa6c541d6324a46f47f7ebe60be6d/bg1.png)
F900 SERIES
DATE PURCHASED:
MODEL NUMBER:
SERIAL NUMBER:
DEALER:
SERVICE PROVIDER:
User, installation and servicing instructions
NEUTRAL UNIT
N940, N940D, N940DR, N940T, N941, N960, N960D,
N960DR, N961, N910, N920
Read these instructions before use
T100893
1
![](/html/b2/b246/b246cfc219e817b2ebc8475fd944cee3cd2aa6c541d6324a46f47f7ebe60be6d/bg2.png)
Falcon Foodservice Equipment
Dear Customer,
Thank you for choosing Falcon Foodservice Equipment.
This manual can be downloaded from www.falconfoodservice.com or scan
here.
IMPORTANT: Please keep this manual for future reference.
HEAD OFFICE
Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.
WEEE Directive Registration No. WEEE/DC0059TT/PRO
At end of appliance life, dispose of appliance and any replacement parts in a safe
manner, via a licensed waste handler. Appliances are designed to be dismantled
easily and recycling of all material is encouraged whenever practicable.
2
![](/html/b2/b246/b246cfc219e817b2ebc8475fd944cee3cd2aa6c541d6324a46f47f7ebe60be6d/bg3.png)
SYMBOLS
• SPANNER • SCREWDRIVER • COOKING OIL • GREASE
• SPARK IGNITION • FLAME • WARNING • VIEWPORT
• ALLEN KEY •IGNITER
3
![](/html/b2/b246/b246cfc219e817b2ebc8475fd944cee3cd2aa6c541d6324a46f47f7ebe60be6d/bg4.png)
These instructions are only valid if the country code appears on the
appliance. If the code does not appear on the appliance, refer to the
technical instructions for adapting the appliance to the conditions for use
in that country.
Installation must meet national or local regulations. Attention must be paid
to: safety (installation & use) regulations, health and safety at work act,
local and national building regulations, fire precautions act.
To prevent shocks, all appliances must be earthed.
This appliance has been CE-marked on the basis of compliance with the
Low Voltage and EMC Directives for the voltages stated on the data plate
This equipment is for professional use only and must be used by qualified
persons.
The installer must instruct the responsible person(s) of the correct
operation and maintenance of the appliance.
Only competent persons are allowed to service this appliance.
Unless otherwise stated, parts which have been protected by the
manufacturer must not be adjusted by the installer.
Take care when moving an appliance fitted with castors.
The appliance must be serviced regularly by a qualified person. Service
intervals should be agreed with the service provider.
Check that no damage has occurred to the appliance, power cable, or plug
during transit. If damage has occurred, do not use this appliance.
Installation, periodic testing, repair and fixed wiring connections should
only be undertaken by a competent electrician.
Ensure power cable is routed free from the appliance to avoid damage.
We recommend supplementary electrical protection with the use of a
residual current device (RCD)
The appliance has been designed and approved to use Falcon Kick plates,
non Falcon kick plates could potentially adversely affect the performance
of the appliance by restricting the air to the appliance.
4
![](/html/b2/b246/b246cfc219e817b2ebc8475fd944cee3cd2aa6c541d6324a46f47f7ebe60be6d/bg5.png)
CONTENTS
1 APPLIANCE INFORMATION ......................................................................................... 6
2 SPECIFICATION ........................................................................................................... 7
3 DIMENSIONS / CONNECTION LOCATIONS ................................................................ 8
4 INSTALLATION ........................................................................................................... 11
4.1 ASSEMBLY .......................................................................................................... 11
4.2 EQUIPOTENTIAL CONNECTION ........................................................................ 11
4.3 SUITING ............................................................................................................... 11
5 SPARE PARTS ............................................................................................................ 14
6 SERVICING INFORMATION ....................................................................................... 14
5