Falcon G3441, G3941, G3441R, G3641R, G3941R User Instructions

G3441/G3641/G3941
G3441R/G3641R/G3941R
G3641FR/G3941FR Griddles

USERS INSTRUCTIONS

SECTION 1 - GENERAL DESCRIPTION

SECTION 2 - LIGHTING and OPERATIONS

SECTION 3 - COOKING HINTS

SECTION 4 - CLEANING and MAINTENANCE

This appliance has been CE-marked on the basis of compliance with the Gas Appliance
Directive for the Countries, Gas Types and Pressures as stated on the data plate.

The appliance MUST BE installed by a competent person in compliance with the INSTALLATION AND
SERVICING INSTRUCTIONS and National Regulations in force at the time. Particular attention MUST
be paid to the following:

Gas Safety (Installation & Use) Regulations

Health and Safety at Work Act

Furthermore, if a need arises to convert the appliance for use with another gas, a competent person
must be consulted. Those parts which have been protected by the manufacturer MUST NOT be
adjusted by the User.

Users should be conversant with the appropriate provisions of the Fire Precautions Act and the
requirements of the Gas Safety Regulations. in particular the need for regular servicing by a
competent person to ensure the continued safe and efficient performance of the appliance.

WARNING - TO PREVENT SHOCKS, ALL APPLIANCES WHETHER GAS OR ELECTRIC,

MUST BE EARTHED.

Upon receipt of the User's Instruction manual, the installer must instruct the responsible person(s) of
the correct operation and maintenance of the Appliance. This equipment is ONLY FOR
PROFESSIONAL USE, and shall be operated by QUALIFIED persons. It is the responsibility of the
Supervisor or equivalent to ensure that users wear SUITABLE PROTECTIVE CLOTHING and to draw
attention to the fact that, some parts will, by necessity, become VERY HOT and will cause burns if
touched accidentally.

WEEE Directive Registration No. WEE/DC0059TT/PRO

At end of unit life, dispose of appliance and any replacement
parts in a safe manner, via a licenced waste handler.
Units are designed to be dismantled easily and recycling of all
material is encouraged whenever practicable.

Falcon Foodservice Equipment

HEAD OFFICE AND WORKS

Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.

SERVICELINE CONTACT

Phone: [phone] Fax: [phone]

T100765 Ref. 2

SECTION 1 ­GENERAL DESCRIPTION

DOMINATOR PLUS griddles are 400mm, 600mm and
900mm wide respectively. These appliances may be
installed on a counter, table or on the special purpose
floor stand supplied by Falcon. Units are of modular
dimensions which enable suites of appliances to be
installed in a matching line, either counter-mounted,
as these or floor mounted i.e. ranges and fryers.

G3441 (400mm) has a rating of 5.3kW (nett) / 19,900
btu/hr (gross), controlled by combined thermostat and
flame failure device. Refer to Figure 1. Burner ignition is
by pilot, lit manually using the built-in piezo igniters.
Numbered gradients are identified on thermostat knob.
The fully ribbed G3441FR is identical in terms of rating.

G3641 (600mm) has a rating of 11kW (nett) / 41,800
btu/hr (gross). Controlled as detailed for G3441. Refer to
Figure 2. The half-ribbed G3641R and fully ribbed
G3641FR are identical in terms of rating.

The G3941 (900mm) griddle has three burners with a
rating of 16.5kW (nett) / 62,000 btu/hr (gross). Controlled
as detailed for G3441. Refer to Figure 3. The half-ribbed
G3941R and fully ribbed G3941FR are identical in terms
of rating.

Numbered gradients are identified on thermostat knobs.
Refer to Figure 4.

Thermostat control

Viewport

Figure 2

Figure 3

Centre viewportLH viewport

RH viewport

RH
thermostat
control

LH piezo
igniter

Centre
piezo igniter

RH piezo
igniter

Centre
thermostat
control

LH
thermostat
control

Piezo
igniter

Figure 1

LH viewport

RH viewport

LH piezo
igniter

LH
thermostat
control

RH
thermostat
control

RH piezo
igniter

G3441

G3641

G3941