Falcon 2FE1080PEECAM Instruction Manual

FALCON

ELECTRONICS

1080P DVR DASH CAM Instruction Manual

Part #: 2FE1080PEECAM

General Dash Cam Overview:

1) Up button 2) Menu button 3) Down button 4) USB data interface 5)HDMI Slot 6) Power

button7)MicroTF/Memory card slot 8) HOLD/Lock (SOS) button9) Mode selection button10)
OK/Confirm button 11) IR LED Light 12) Speaker 13) Reset button

Description of Function Keys:

1) Up button: While in Standby mode (camera is on but not recording), use this button to zoom
while recording. Also in menu setting mode, short press this key to move up in the menu
options.

2) Menu button: Short-Press to bring up the feature set menu.

3) Down button: While in Standby mode (camera is on but not recording), use this button to
lessen while recording. Also in menu mode, short press this key to move down in the menu.

4)USB Data Interface: The USB data interface is used for 2 reasons, (1) for connecting a PC to
the camera to transfer data; (2)for connecting 12v cig lighter charger to charge the battery&/or
provide power to unit.

5) HDMI Slot: This slot is used to connect and play video directly to LCD’s with HDMI port.
(HDMI cable not included)

6) Power Button: Long press this button to power the camera on and off; short press this
button to turn the IR LED light on and off.

7) MicroTF/Memory card slot: This unit must have a TF/Memory card in this slot to work
properly. Only insert or eject micro TF/memory card while device is powered off. 8 GB to 32 GB
should function properly in device. (Includes 8 GB)

8) HOLD/Lock (SOS) button: Press this button while the camera is recording, and the current
video file is protected and can’t be deleted with normal recording (see below special function)

9) Mode selection button: Short Press this button to switch between the camera functions
video camera/ still frame picture camera/ playback.

10) 0K/Confirm button: In the Video mode, short press this key to start recording and short
press again to stop recording; In the camera mode , Short Press to take pictures; In the Menu
mode, press this key to confirm your choice.