This document is available at HTTP://WWW.FALCOM.DE/
SAMBA3G-E
HSDPA/UMTS and GSM/GPRS/EDGE
USB Modem
User’s Manual
Version: 1.0.1; Last Modified: Friday 11 December 2009
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
Table of contents
1 INTRODUCTION.......................................................................5
1.1 GENERAL..........................................................................................................................5
1.2 SCOPE OF DELIVERY............................................................................................................6
1.3 USED ABBREVIATIONS...........................................................................................................7
1.4 RELATED DOCUMENTS..........................................................................................................8
2 SECURITY.................................................................................9
2.1 GENERAL INFORMATION.........................................................................................................9
2.2 EXPOSURE TO RF ENERGY...................................................................................................9
2.3 DRIVING............................................................................................................................9
2.4 ELECTRONIC DEVICES...........................................................................................................9
2.5 VEHICLE ELECTRONIC EQUIPMENT..........................................................................................10
2.6 MEDICAL ELECTRONIC EQUIPMENT..........................................................................................10
2.7 AIRCRAFT........................................................................................................................10
2.8 CHILDREN.......................................................................................................................10
2.9 BLASTING AREAS...............................................................................................................10
2.10 POTENTIALLY EXPLOSIVE ATMOSPHERES................................................................................10
2.11 NON-IONIZING RADIATION...................................................................................................11
3 SAFETY STANDARDS...........................................................12
4 TECHNICAL DATA.................................................................13
4.1 GENERAL SPECIFICATIONS OF SAMBA3G.............................................................................13
5 INTERFACES IN OVERVIEW.................................................16
5.1 4PIN AUDIO JACK...............................................................................................................16
5.2 4PIN USB TYPE A CONNECTOR...........................................................................................17
5.3 STATUS LED..................................................................................................................18
5.4 SIM-CARD READER.........................................................................................................18
6 SYSTEM REQUIREMENTS....................................................19
6.1 HARDWARE & SOFTWARE REQUIREMENTS................................................................................19
6.2 GETTING STARTED WITH SAMBA3G-E................................................................................19
6.2.1 Setting up your Modem in Windows® XP............................................................19
7 APPENDIX...............................................................................23
7.1 ACCESSORY HEADSET FOR SAMBA.....................................................................................23
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 2
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
Version history:
This table provides a summary of the document revisions.
Version
Author Changes Modified
1.0.1 F. Beqiri - The SAMBA 3G modem is designed for industrial M2M applications.
- Updated chapter "Scope of delivery"
- Replaced Fig.8a, Fig.8b and Fig.8c by Fig. 8.
- Added CAUTION.
11/12/2009
1.0.0 F. Beqiri - Initial version 24/10/2008
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 3
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
Cautions
Information furnished herein by FALCOM is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Please, read carefully the safety
precautions.
If you have any technical questions regarding this document or the product described
in it, please contact your vendor.
General information about FALCOM and its range of products are available at the
following Internet address: http://www.falcom.de/
Trademarks
Some mentioned products are registered trademarks of their respective companies.
Copyright
This document is copyrighted by FALCOM WIRELESS COMMUNICATIONS GmbH with all
rights reserved. No part of this documentation may be produced in any form without
the prior written permission of FALCOM WIRELESS COMMUNICATIONS GmbH.
FALCOM WIRELESS COMMUNICATIONS GmbH.
No patent liability is assumed with respect to the use of the information contained
herein.
Note
Specifications and information given in this document are subject to change by
FALCOM without notice.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 4
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
1 INTRODUCTION
This manual is focussed on the GSM/GPRS/EDGE/UMTS data solutions of the enhanced
performance SAMBA3G-E USB modem from FALCOM Wireless Communications GmbH.
1.1 General
The SAMBA3G-E portable USB modem is a 3.5G wireless data modem, compact, lightweight that features a single-band 2100MHz UMTS/HSDPA radio for data connectivity.
The SAMBA3G-E is fully backward compatible to existing EDGE and GSM/GPRS networks
and maintains the same form-factor of the well-known SAMBA55-56/SAMBA75 modems.
The major benefit over earlier SAMBA55-56/SAMBA75 is that it supports HSDPA/UMTS
(Universal Mobile Telecommunications System).
This modem is especially designed for industrial M2M (Machine to Machine)
applications.
SAMBA3G-E allows to send and receive data, including digital images, web pages and
photographs, with a transfer rate up to 7.2 Mbits. Additional features are also voice and
SMS. It can be easily controlled by using AT commands for all kinds of operations. The
SAMBA3G-E is designed for use on single-band WCDMA/HSDPA 2100 network and
GSM/GPRS/EDGE 900MHz and 1800MHz networks. With its pocket-sized construction it is
able to provide up to 7.2 Mbits Internet access by using WCDMA/HSDPA 2100. It
constitutes a self contained, fully integrated implementation of the GSM/GPRS/EDGE
and HSDPA/UMTS functionalities. The SAMBA3G-E provides an integrated SIM card
reader and an internal GSM antenna to simplify the setup and use. The physical
interface to the modem application is made through an embedded USB connector
which simplifies setup and operation of the modem. It allows connection to a USB host
port using the USB Docking station. The modem has an integrated LED indicator that will
show the complete modem status.
About GPRS
General Packet Radio Service (GPRS) is a high-speed, data-only service that is an add-on
to the GSM (Global System for Mobile Communications) cellular network - a type of
network used to provide cellular phone service. The SAMBA3G-E Modem provides reliable
data connections to GPRS 900 MHz (GSM), GPRS 900 (GSM), and 1800 MHz (DCS)
networks. When in regions where GPRS is not available, user can still establish 14.4 kbps
GSM data connections.
About EDGE
Enhanced Data rates for GSM Evolution (EDGE) is a third-generation (3G) high-speed
mobile data and Internet access technology, with downlink up to 236.8 kbps and uplink
up to 118 kbps. The average rates are fast enough to support a wide range of advanced
data services, including streaming audio and video, fast Internet access and large file
downloads.
About UMTS
Universal Mobile Telecommunications System (UMTS) is one of the third-generation (3G)
high-speed mobile data and Internet access technology, with theoretical peak rates of
473 kbps and average throughput of 110-130 kbps. The average rates are fast enough to
support a wide range of advanced data services, including streaming audio and video,
fast Internet access and large file downloads.
About HSDPA
High-Speed Downlink Packet Access (HSDPA) is a 3G (third generation) mobile telephony
communications protocol in the High-Speed Packet Access (HSPA) family, which allows
networks based on Universal Mobile Telecommunications System (UMTS) to have higher
data transfer speeds and capacity. Current HSDPA on SAMBA3G-E supports down-link
speed of up to 7.2 Mbits/s and up-link speed of up to 384 kbps.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 5
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
1.2 Scope of delivery
Check the contents of the ordering item. The following listed parts of chosen item
should be included. In case of damaged or missing any part, please contact your
dealer immediately.
SAMBA3G-E SAMBA-USB-KIT
KA18 (Y-Cable) KA19
Ordering Description Quantity
SAMBA3G-E-SET SAMBA3G-E modem incl. USB driver 1
USB-KIT* USB-Docking station with cable extension (in red color or blue color) and USB tilt
connector.
-
KA18* Enables additional current draw from the two USB ports that can be required when
EDGE data transfer is in progress only.
-
KA19* USB extention cable -
* Not parts of the SAMBA3G-E delivery pack. Available upon request.
Table 1: Ordering items
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 6
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
1.3 Used abbreviations
Abbreviation Description
ETSI European Telecommunications Standards Institute
GSM Global System for Mobile communications
IMEI International Mobile station Equipment Identity
ME Mobile Equipment
EDGE Enhanced Data rates for GSM Evolution
GPRS General Packet Radio Service
GMSK Gaussian Minimum Shift Keying
PLMN Public Land Mobile Network
PIN Personal Identification Number
PUK Personal Unblocking Key
RP Receive Protocol
SIM Subscriber Identity Module
SMS Short Message Service
SMS/PP Short Message Service/Point-to-Point
TA Terminal Adapter
TE Terminal Equipment
TP Transmit Protocol
MS Mobile Station
USB Universal Serial Bus
PTM Point To Multipoint
NOM Network Operation Mode
PPP Point to Point Protocol
PSK Phase Shift Keying
CSD Circuit Switched Data
APN Access Point Naming
IP Internet Protocol
PDP Packet Data Protocol
RF Radio Frequency
UMTS Universal Mobile Telecommunications System
HSDPA High-Speed Downlink Packet Access
Table 2: Used abbreviations
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 7
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
1.4 Related documents
1. Telit_AT_Commands_Reference_Guide_UC864.pdf
2. Telit_Easy_GPRS_User__Guide_r4.pdf
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 8
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
2 SECURITY
IMPORTANT FOR THE EFFICIENT AND SAFE OPERATION OF YOUR GSM-MODEM, READ THIS
INFORMATION BEFORE USE!
Your cellular engine SAMBA3G-E is one of the most exciting and innovative electronic
products ever developed. With it you can stay in contact with your office, your home,
emergency services and others, wherever service is provided.
This chapter contains important information for the safe and reliable use of the
SAMBA3G-E modem. Please read this chapter carefully before starting to use the
cellular engine SAMBA3G.
2.1 General information
Your SAMBA3G-E device utilizes the GSM standard for cellular technology. GSM is a
newer radio frequency („RF“) technology than the current FM technology that has
been used for radio communications for decades. The GSM standard has been
established for use in the European community and elsewhere. Your SAMBA3G-E is
actually a low power radio transmitter and receiver. It sends out and receives radio
frequency energy. When you use your modem, the cellular system handling your calls
controls both the radio frequency and the power level of your cellular modem.
2.2 Exposure to RF energy
There has been some public concern about possible health effects of using a GSM
modem. Although research on health effects from RF energy has focused for many
years on the current RF technology, scientists have begun research regarding newer
radio technologies, such as GSM. After existing research had been reviewed, and after
compliance to all applicable safety standards had been tested, it has been concluded
that the product is fit for use.
If you are concerned about exposure to RF energy there are things you can do to
minimize exposure. Obviously, limiting the duration of your calls will reduce your
exposure to RF energy. In addition, you can reduce RF exposure by operating your
cellular modem efficiently by following the guidelines below.
2.3 Driving
Check the laws and regulations on the use of cellular devices in the area where you
drive. Always obey them. Also, when using your modem while driving, please pay full
attention to driving, pull off the road and park before making or answering a data call if
driving conditions so require. When applications are prepared for mobile use they
should fulfil road-safety instructions of the current law!
2.4 Electronic devices
Most electronic equipment, for example in hospitals and motor vehicles is shielded from
RF energy. However, RF energy may affect some malfunctioning or improperly shielded
electronic equipment.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 9
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
2.5 Vehicle electronic equipment
Check your vehicle manufacturer’s representative to determine if any on board
electronic equipment is adequately shielded from RF energy.
2.6 Medical electronic equipment
Consult the manufacturer of any personal medical devices (such as pacemakers,
hearing aids, etc.) to determine if they are adequately shielded from external RF
energy.
Turn your SAMBA3G-E device OFF in health care facilities when any regulations posted
in the area instruct you to do so. Hospitals or health care facilities may be using RF
monitoring equipment.
2.7 Aircraft
Turn your SAMBA3G-E OFF before boarding any aircraft. Use it on the ground only with
crew permission. Do not use it in the air.
To prevent possible interference with aircraft systems, Federal Aviation Administration
(FAA) regulations require you to have permission from a crew member to use your
modem while the plane is on the ground. To prevent interference with cellular systems,
local RF regulations prohibit using your modem whilst airborne.
2.8 Children
Do not allow children to play with your SAMBA3G-E device. It is not a toy. Children
could hurt themselves or others (by poking themselves or others in the eye with the
antenna, for example). Children could damage the modem or make calls that
increase your modem bills.
2.9 Blasting areas
To avoid interfering with blasting operations, turn your unit OFF when in a “blasting
area” or in areas posted: "turn off two-way radio". Construction crew often uses remote
control RF devices to set off explosives.
2.10 Potentially explosive atmospheres
Turn your SAMBA3G-E device OFF when in any area with a potentially explosive
atmosphere. It is rare, but your modems or their accessories could generate sparks.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or even
death.
Areas with a potentially explosive atmosphere are often, but not always, clearly
marked. They include fuelling areas such as petrol stations; below decks on boats; fuel
or chemical transfer or storage facilities; and areas where the air contains chemicals or
particles, such as grain, dust or metal powders.
Do not transport or store flammable gas, liquid or explosives, in the compartment of
your vehicle, which contains your modem or accessories.
Before using your modem in a vehicle powered by liquefied petroleum gas (such as
propane or butane) ensure that the vehicle complies with the relevant fire and safety
regulations of the country in which the vehicle is to be used.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 10
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
2.11 Non-ionizing radiation
The SAMBA3G-E comes with an internal antenna. Therefore, care should be taken to
install the modem in such a position that no part of the human body will normally rest
within 20 cm of any part of the modem. It is also recommended to use the modem not
close to medical devices as for example hearing aids and pacemakers.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 11
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
3 SAFETY STANDARDS
Your GSM mobile complies with all applicable RF safety standards.
The GSM mobile meets the safety standards for RF receivers and the standards and
recommendations for the protection of public exposure to RF electromagnetic energy
established by government bodies and professional organizations, such as directives of
the European Community, Directorate General V in matters of radio frequency
electromagnetic energy.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 12
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
4 TECHNICAL DATA
4.1 General specifications of SAMBA3G
Power supply:
➢ +5 VDC through USB port, compliant with USB 2.0
specification.
Extended Temperature range:
➢ Operational: -30 °C to +80 °C
➢ Storage temperature: -40 °C to +90 °C
Physical characteristics:
➢ Size: 88.7mm x 37.6mm x 14.1mm (L x B x H)
➢ Weight: 35 g
Frequency bands:
➢ GSM 900, DCS 1800 MHz
➢ WCDMA 2100 MHz
➢ Compliant to GSM Phase 2/2+
Transmit power:
➢ Class 4 (2 W) at EGSM 900
➢ Class 1 (1 W) at GSM1800
➢ Class 3 (0.25W) at WCDMA 2100
➢ Class E2 (0.5W) at GSM 900 (EGPRS mode)
➢ Class E2 (0.4W) at GSM1800 (EGPRS mode)
GPRS/EDGE connectivity:
➢ GPRS multi-slot class 12
➢ GPRS mobile station class B
➢ EDGE multi-slot class 12
➢ EDGE mobile station class B
DATA:
H SDPA ⇒
➢ Data downlink transfer: max. 7.2 Mbits/s.
➢ Data uplink transfer: max. 384 kbps.
WCDMA ⇒
➢ Data downlink/uplink transfer: max. 384 kbps.
EDGE ⇒
➢ EDGE data downlink transfer: max. 236.8 kbps (4 x downlink).
Achieving an average throughput of 80 to 160 kbps
supporting 2-4 timeslots –our lab test results.
➢ EDGE data uplink transfer: max. 118.4 kbps (2 x uplink).
➢ Modulation and Coding Scheme: MCS 1 - 9.
GPRS ⇒
➢ GPRS data downlink transfer: max. 85.6 kbps.
➢ GPRS data uplink transfer: max. 42.8 kbps.
➢ Coding Scheme CS 1 – 4.
➢ SAMBA3G-E supports two protocols PAP (Password
Authentication Protocol) and CHAP (Challenge Handshake
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 13
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
Authentication Protocol) commonly used for PPP
connections.
➢ Supports of Packet Switched Broadcast Control Channel
(PBCCH) allows you to benefit from enhanced GPRS
performance when offered by the network operators.
CSD ⇒
➢ Downlink/Uplink up to 14.4 kbps.
Additional features:
➢ Voice and SMS
➢ Embedded TCP/IP stack with IP and UDP protocols, access
via AT commands
➢ Standard and extended AT command set
➢ Minimal power consumption
➢ Firmware upgradeable via USB or via over-the-air
Audio interfaces:
➢ 4pin audio jack for Headset
MMS:
➢ MMS compliant
FAX:
➢ Group 3: class 1, class 2
SIM interface:
➢ Slot for small SIM cards 3/1.8 V only
Casing:
➢ Fully shielded
USB port as slave:
➢ Bi-directional bus for AT commands and data
➢ USB 2.0 Full Speed (12 Mbit/s) slave interface
Coding scheme 1 Timeslot 2 Timeslots 4 Timeslots
CS-1: 9.05 kbps 18.1 kbps 36.2 kbps
CS-2: 13.4 kbps 26.8 kbps 53.6 kbps
CS-3: 15.6 kbps 31.2 kbps 62.4 kbps
CS-4: 21.4 kbps 42.8 kbps 85.6 kbps
Table 3: GPRS Coding schemes and maximum network data rates over air interface
Please note that the values listed above are the maximum ratings which, in practice, are influenced by a
great variety of factors, primarily, for example, traffic variations and network coverage.
EDGE is four times as efficient as GPRS. GPRS use four coding schemes (CS-1 to 4, see table 2)
while EDGE use nine Modulation and Coding Schemes (MCS-1 to 9, see table 2.1).
Coding and modulation scheme (MCS) Speed Modulation
MCS-1:
8.80 kbit/s/slot
GMSK
MCS-2:
11.2 kbit/s/slot
GMSK
MCS-3:
14.8 kbit/s/slot
GMSK
MCS-4:
17.6 kbit/s/slot
GMSK
MCS-5:
22.4 kbit/s/slot
8-PSK
MCS-6:
29.6 kbit/s/slot
8-PSK
MCS-7:
44.8 kbit/s/slot
8-PSK
MCS-8:
54.4 kbit/s/slot
8-PSK
MCS-9:
59.2 kbit/s/slot
8-PSK
Table 3.1: EDGE Coding schemes
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 14
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
5 INTERFACES IN OVERVIEW
The table below lists all interfaces available on the SAMBA3G-E modem:
Interface specifications
USB USB A-type plug connector is used to connect the modem to a a USB host. This interface USB 2.0
supports a Full Speed rate of 12 MBits/s.
LED Used to show the status of the modem.
SIM SIM card reader for small SIM cards (3/1.8V).
AUDIO 4pin jack for headset
Table 4: Modem interfaces
Figure 1: View of SAMBA3G-E interfaces.
5.1 4pin audio jack
The SAMBA3G-E modem has a 4pin audio interface for connecting a headset. For more
details about the headset, see chapter 7.1 “Accessory”.
Figure 2: 4pin audio jack (for plugging a headset) .
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 15
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
The following table lists the contacts of the audio plug (headset) for mating with the
audio jack type connector on the SAMBA3G-E.
Figure 2.1: Contacts of a 4pin audio plug connector (for connecting to the audio jack on the
SAMBA3G-E) .
PIN PIN NAME DESCRIPTION
1 SPK_P Audio speaker +
2 MIC_N Mic -
3 SPK_N Audio speaker -
4 MIC_P Mic +
Table 5: Contacts for 2.5 mm audio plug - headset (see Fig. 2.1 as reference).
5.2 4pin USB Type A connector
The physical interface to the modem application is made through the USB connector
which simplifies setup and operation of the modem. It allows direct connection to a USB
host port and it gives you maximum life from your laptop's battery in that it draws power
directly from the USB port and only uses the battery when plugged in.
Figure 3: Pinout of the USB connector
The following table lists the pin configuration of the USB connector on the SAMBA3G-E,
viewed from face of plug.
PIN NAME DESCRIPTION
1 VCC + 5V
2 D - Data -
3 D + Data +
4 GND Ground
Table 6: Pinout of the USB connector on the SAMABA3G modem
When the GPRS/EDGE data transfer is in progress, the SAMBA3G-E may require more
power than is permitted by the specifications for a single USB port, which may rise to
600 – 700 mA in the data transmit burst. By means of a dual input USB cable called "Ycable" (available upon request by FALCOM) you are able to get extra power from 2
nd
USB port. The Y-cable offers 3 x USB connectors (incl. 2 x A-type plugs and 1 x A-type
receptacle). Both A-type plugs should be plugged into the different Computer USB
ports, while the A-type receptacle connector should be plugged into the SAMBA3G-E
USB connector.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 16
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
Figure 4: USB Y-Cable (not included, available upon request)
5.3 Status LED
The actual state of the SAMBA3G-E is displayed by one LED (its functionality is given in
table below).
Figure 5: Status LED
It is a debug aid that shows information on the network service availability.
Name LED mode Function
Status LED
Off Modem is off
Fast blinking (period 1s, Ton 0,5s) Net search / Not registered / turning off
Slow blinking (period 3s, Ton 0,3s) Registered: full service
Permanently on A call is active
Table 7: Associated functions of the status LED.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 17
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
5.4 SIM-Card Reader
The SIM interface controls 3 and 1.8V SIM cards. This interface is fully compliant with
GSM 11.11 recommendations concerning SIM functions.
Figure 6: SIM Card interface
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 18
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
6 SYSTEM REQUIREMENTS
Check your hardware and software and see if they satisfy the requirements below. If
you are not sure, please consult your vendor or operator.
6.1 Hardware & software requirements
Hardware & software requirements
A valid SIM card (with UMTS enabled).
2 x Free compatible USB port
Approximately 6 Mb of free hard disk space.
Pentium 90 or higher.
Operating system: Windows® XP
CD-ROM drive.
For data applications.
Browser and email client.
6.2 Getting started with SAMBA3G-E
6.2.1 Setting up your Modem in Windows® XP
This chapter describes how to install your SAMBA3G-E in Windows. It is recommended
that all-important files in your computer are backed up before the installation.
1- Inserting the SIM card:
SAMBA3G-E requires a small SIM card, which is provided by your mobile phone
service provider. This contains the telephone number of SAMBA3G-E will use, as well
as other customer information. To use UMTS services the SIM card should be UMTSenabled.
a) How to insert a SIM card:
Insert the SIM card into the corresponding SIM card reader of the modem
as shown in figure below and slide it forward until it stops. The bevelled
corner of the SIM card has to be on the left side of SIM card reader and
the golden contact area is facing downwards. Make sure that the SIM
card is sit firmly into the SIM card reader slot. See also figures below.
Figure 7.a: Insert the SIM Card. Figure 7.b: Push it forward into the
SIM-holder until it stops.
Figure 7.c: To remove the SIM, press
the edge of card using
your finger nail or a
pointed object.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 19
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
b) How to remove the SIM card:
To remove the SIM card, just press the inserted SIM card by using your
finger nail or a pointed object. The SIM card will jump out when you
release it. Finally, take it out.
Important: Do not insert or remove the SIM card when the device is
under power.
Keep all miniature SIM cards out small children’s reach. The SIM card and its
contacts can be damaged by scratches or bending, so be careful when
handling, inserting or removing the SIM card.
2 - How to use SAMBA3G-E phone with a terminal software, only
This step explains the methods of installing the USB driver for the SAMBA3G-E, and
enable communication between the modem and host device through the USB
port.
If you are using MobilePhoneTool software, first read the CAUTION below and then
refer to the description available in the software installation folder, otherwise follow
the steps below.
To install the SAMBA3G-E modem in a computer running Windows XP, follow these
steps:
A) First of all, download the USB driver for SAMBA3G-E from the FALCOM website
"http://www.falcom.de/uploads/media/Samba3G_USB_Driver.zip".
B) Unpack the downloaded .zip file and then plug the SAMBA3G-E USB
connector into the USB socket of the docking station (see chapter "Scope of
delivery' - SAMBA-USB-Kit) and then connect the the docking station to a free
USB port on your host device. You can also use the Y-Cable (see Figure 4) to
get extra power from 2nd USB port when the modem requires it (e.g. when
using EDGE services).
Figure 8: Connecting SAMBA 3G-E
CAUTION : In order to comply with RF exposure requirements, install the terminal so that a
minimum distance of 20 cm can be maintained between the modem and
persons.
C) When the modem is connected to the host device, Windows pops up a
balloon with the text “Data interface” near the Windows try. Shortly after, the
"Found New Hardware Wizard" screen will appear. To continue, select the
"No, not this time" option and then click Next.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 20
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
D) On the next screen, select the "Install from a list or specific
location(Advanced)" option and then click Next.
Figure 9: Searching modem USB driver
E) The "Please choose your search and installation options" dialog will appear.
Select the "Include this location in the search" option under "Search for the
best driver in these locations", and then use the Browse button to navigate
to the unzipped USB Modem folder (e.g. "D:\Samba3G_USB_Driver").
Figure 10: Browsing to modem USB driver
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 21
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
F) Wizard copies the driver files automatically.
Figure 11: Installing modem USB driver
During the installation, if popup window appears, just click the “Continue
Anyway”.
Figure 12: Browsing to modem USB driver
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 22
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
G) When the "Completing the Found New Hardware Wizard" screen appears,
click Finish.
Figure 13: Completing modem USB driver
H) After the installation of SAMBA3G-E USB Modem, Hardware Wizard will appear
2 times more to install Telit Auxiliary Port and Telit Diagnostics Interface. You
are able to install these two drivers as same way. Through process above,
Windows installed Telit USB Modem, Telit Auxiliary Port and Telit Diagnostics
Interface. You can check the result in the Modem item and Port item of the
Device Manager. Go to "My Computer → Properties → Hardware → Device
Manager".
Figure 14: Installed USB driver
The driver installation is completed after the Windows pops up a balloon with the
text “Your new hardware is installed and ready to use” near the Windows try.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 23
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
3 - Plug a headset to the audio jack on modem:
If you are using the included headset (refer to the chapter Appendix for more details),
then plug the 2.5 mm plug of the headset into the 2.5 mm jack of the modem (see
figure below).
Figure 15: Connect the headset to the modem
4 - Setup HyperTerminal program
To communicate with the SAMBA3G-E modem, start the HyperTerminal program or
another terminal program, and then use the AT commands available in the
corresponding manual.
To start the HyperTerminal go to:
START – PROGRAMS – ACCESSORIES –COMMUNICATION – HYPERTERMINAL,
then start the software HyperTerminal, assign the name of your choice (e.g.
SAMBA3G-E), click on the icon of your choice, then click OK. On the appeared
dialog box choose:
Connect using: e.g. COM10 (COM port assigned to "Telit Auxiliary Port ")
Then click on OK. On the properties of the selected COM port choose:
Properties: choose 115200 bps – 8 bits data – no parity – 1 stop bit –
hardware flow control
Finally click on OK.
Once HyperTerminal is opened and configured (see Fig. 16), use AT commands to
to perform your specific settings.
To test the SAMBA3G-E phone type on the terminal screen:
AT<enter>
Modem responds:
OK
If you don't see the characters you are typing, enter ATE1 and then press ( ) enter
key.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 24
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
Figure 16: HyperTerminal screen.
To enter the PIN code of the used SIM card type on the terminal screen:
AT+CPIN=pin<enter> // pin = PIN code of your SIM card
Modem responds:
OK
The SAMBA3G-E will go into the search mode and the Status LED will operate as
described in Table 6.
For more information about AT commands, please refer to the manual
"Telit_AT_Commands_Reference_Guide_UC864.pdf" available in the FALCOM
website.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 25
SAMBA3G-E USER’S GUIDE VERSION 1.0.1
7 APPENDIX
7.1 Accessory headset for SAMBA3G-E
The retractable Headset with a 2.5mm plug (see also figure below) included in the
SAMBA3G-E-SET fully compatible with SAMBA3G-E phone is designed to do two things
at once, if those two things are driving and talking on the cell phone. The retractable
Headset is lightweight, super-easy to use, comfortable, and has great incoming and
outgoing sound quality. Retractable quality earpiece and microphone pulling out to
desired length independently. The retractable cord length is 78 mm. The headset
length is 1m. You have just to connect it to the corresponded connector of SAMBA3G-
E. To wear the earpiece, simply pull it out of its casing slowly until you reach the
sufficient length and sit it inside the ear. Should the length of the cable too long/short,
pull the cable slowly out or retract while holding the both sides onto the cable until the
length is suitable.
Figure 17: Installed USB driver
If the user is using other external headset please follow the characteristics for different
microphone inputs and different speaker outputs:
Items to be inspected Acceptance criterion
Sensitivity -41 ±3dB (0dB=1 V/Pa @ 1kHz)
Frequency response Limits
Freq. (Hz) Lower limit Upper limit
100 -38
200 -38
300 -50 -38
1000 -44 -38
2000 -44 -34
3000 -44 -34
3400 -44 -34
4000 -47 -34
Current consumption 1 mA (max.)
Operating voltage DC 1 to 3 V (min.)
S/N ratio 55 dB minimum (A-Curve at 1 kHz, 1 Pa)
Directivity Omni-directional
Max. input sound pressure level 100 dB SPL (1 kHz) Maximum distortion 1 %
Radio frequency protection Over 800-1200 MHz and 1700-2000MHz, S/N ratio 500 dB minimum (signal 1 kHz, 1 Pa)
Table 8: Headset characteristics
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 26
Loading...