FAN8403D3
3-Phase BLDC Motor Driver with PLL
www.fairchildsemi.com
Features
• 3-Phase BLDC motor drive IC with speed control
• Phase Locked Loop (PLL) speed control
• Built-in phase locked detector output
• External clock for control of motor speed
• Built-in FG amplifier and FG schmidt comparator
• Built-in integrating amplifier with phase error
• Auto Gain Control (AGC) circui t for compensation hall
amplifier
• Built-in protection circuits (over-current limit, undervoltage limit, thermal shut down)
Description
The FAN8403D3 is a monolithic integrated circuit. It is suitable for polygon mirror motor of laser beam printer (LBP).
28-SSOPH-375SG2
Typical application
• Polygon mirror motor for laser beam printer
• Polygon mirro r mot o r fo r fac s imile
• Polygon mirro r motor for duplicat or
• Polygon mirror motor for multi-function printer
• General 3 phase BLDC motor
©2002 Fairchild Semiconductor Corporation
Ordering Information
Device Package Operating Temp.
FAN8403D3 28-SSOPH-375SG2 −20°C ~ +80°C
FAN8403D3TF 28-SSOPH-375SG2 −20°C ~ +80°C
Rev.1.0.0
Pin Definitions
Pin Number Pin Name Pin Function Description
1 AGC AGC Amplifier Frequency Characteristics Correction
2FG
3FG
4FG
IN-
S
OUT
5 S/S Stop And Start
6NC 7 SGND Signal Ground
8 LD Phase Locked Loop Detector Output (Open Collect)
9 ECLK External Clock
10 PD Phase Locked Loop Detector Output
11 EI Error Amplifier Inverting Input
12 EO Error Amplifier Output
13 FC Control Amplifier Frequency Correction
14 V
15 SV
16 PV
REG
CC
CC
17 PGND Power Ground
18 RF Output Current Detection
19 NC 20 U U Output
21 V V Output
22 W W Output
23 HV+ V Hall Amplifier Non Inverting Input
24 HV- V Hall Amplifier Inverting Input
25 HU+ U Hall Amplifier Non Inverting Input
26 HU- U Hall Amplifier Inverting Input
27 HW+ W Hall Amplifier Non Inverting Input
28 HW- W Hall Amplifier Inverting Input
FG Amplifier Inverting Input
FG Pulse Output
FG Amplifier Output (Open collect)
Regulator Voltage Stabilization Output
Signal V
Power V
CC
CC
FAN8403D3
3