查询S1D供应商
Features
Glass passivated junction.
•
• 500W Peak Pulse Power capability on
10/1000 µs waveform.
• Excellent clamping capability.
• Low incremental surge resistance.
• Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
• Typical I
Transient Voltage Suppressors
SA5V0(C)A - SA170(C)A
COLOR BAND DENOTES CATHODE
ON UNIDIRECTIONAL DEVICES ONLY. NO
COLOR BAND ON BIDIRECTIONAL DEVICES.
less than 1.0 µA above 10V .
R
SA5V0(C)A - SA170(C)A
DO-15
DEVICES FOR BIPOLAR APPLICA TIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
500 Watt Transient Voltage Suppressors
Absolute Maximum Ratings* T
Symbol
P
PPM
I
PPM
PD Power Dissipation
I
Non-repetitive Peak Forward Surge Current
FSM
T
stg
TJ
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
Peak Pulse Power Dissipation on 10/1000 µs waveform
Peak Puls e C urr e nt on 10 /1000 µs wavefo rm
.375 " lead length @ T
superimposed on rated load (JEDEC method )
Storag e Tem pe r at ure R an ge -65 to +175
Operating Junction Temperature + 175
Parameter
= 75°C
A
= 25°C unless otherwise noted
A
(Note 1)
Value
500 W
see table A
1.0 W
70 A
Units
°
C
°
C
2002 Fairchild Semiconductor Corporation
SA5V0(C)A - SA170(C)A, Rev. D
Transient Voltage Suppressors
(continued)
SA5V0(C)A - SA170(C)A
Electrical Characteristics T
Uni-directional
Bi-directional (C)
Device
Reverse
Stand-off Voltage
V
(V)
RWM
= 25°C unless otherwise noted
A
Breakdow n V o ltage
(V)
V
BR
Test
Current
I
(mA )
T
Clamping V oltag e
@I
PPM
V
(V)
C
Peak Pulse
Current
I
(A)
PPM
Reverse
Leakage V
I
(uA)*
R
min max
SA5V0(C)A 5.0 6.40 7.00 10 9.2 54.3 600
SA6V0(C)A 6.0 6.67 7.37 10 10.3 48.5 600
SA6V5(C)A 6.5 7.22 7.98 10 11.2 44.7 400
SA7V0(C)A 7.0 7.78 8.60 10 12.0 41.7 150
SA7V5(C)A 7.5 8.33 9.21 1.0 12.9 38.8 50
SA8V0(C)A 8.0 8.89 9.83 1.0 13.6 36.7 25
SA8V5(C)A 8.5 9.44 10.4 1.0 14.4 34.7 10
SA9V0(C)A 9.0 10.0 11.1 1.0 15.4 32.5 5
SA10(C)A 10 11.1 12.3 1.0 17.0 29.4 1
SA11(C)A 11 12.2 13.5 1.0 18.2 27.4 1
SA12(C)A 12 13.3 14.7 1.0 19.9 25.1 1
SA13(C)A 13 14.4 15.9 1.0 21.5 23.2 1
SA14(C)A 14 15.6 17.2 1.0 23.2 21.5 1
SA15(C)A 15 16.7 18.5 1.0 24.4 20.6 1
SA16(C)A 16 17.8 19.7 1.0 26.0 19.2 1
SA17(C)A 17 18.9 20.9 1.0 27.6 18.1 1
SA18(C)A 18 20.0 22.1 1.0 29.2 17.2 1
SA20(C)A 20 22.2 24.5 1.0 32.4 15.4 1
SA22(C)A 22 24.4 26.9 1.0 35.5 14.1 1
SA24(C)A 24 26.7 29.5 1.0 38.9 12.8 1
SA26(C)A 26 28.9 31.9 1.0 42.1 11.9 1
SA28(C)A 28 31.1 34.4 1.0 45.4 11.0 1
SA30(C)A 30 33.3 36.8 1.0 48.4 10.3 1
SA33(C)A 33 36.7 40.6 1.0 53.3 9.4 1
SA36(C)A 36 40.0 44.2 1.0 58.1 8.6 1
SA40(C)A 40 44.4 49.1 1.0 64.5 7.8 1
SA43(C)A 43 47.8 52.8 1.0 69.4 7.2 1
SA45(C)A 45 50.0 55.3 1.0 72.7 6.9 1
SA48(C)A 48 53.3 58.9 1.0 77.4 6.5 1
SA51(C)A 51 56.7 62.7 1.0 82.4 6.1 1
SA54(C)A 54 60.0 66.3 1.0 87.1 5.7 1
SA58(C)A 58 64.4 71.2 1.0 93.6 5.3 1
SA60(C)A 60 66.7 73.7 1.0 96.8 5.2 1
SA64(C)A 64 71.1 78.6 1.0 103.0 4.9 1
SA70(C)A 70 77.8 86.0 1.0 113.0 4.4 1
SA75(C)A 75 83.3 92.1 1.0 121.0 4.1 1
SA78(C)A 78 86.7 95.8 1.0 126.0 4.0 1
SA85(C)A 85 94.4 104.0 1.0 137.0 3.6 1
SA90(C)A 90 100.0 111.0 1.0 146.0 3.4 1
SA100(C)A 100 111.0 123.0 1.0 162.0 3.1 1
SA110(C)A 110 122.0 135.0 1.0 177.0 2.8 1
SA120(C)A 120 133.0 147.0 1.0 193.0 2.7 1
SA130(C)A 130 144.0 159.0 1.0 209.0 2.4 1
SA150(C)A 150 167.0 185.0 1.0 243.0 2.1 1
SA160(C)A 160 178.0 197.0 1.0 259.0 1.9 1
SA170(C)A 170 189.0 209.0 1.0 275.0 1.8 1
* For bidirectional parts with V
<10V, the IR max limit is doubled.
RWM
RWM
SA5V0(C)A - SA170(C)A, Rev. D