S2A - S2M
General Purpose Rectifiers (Glass Passivated)
Features
• Easy pick and place.
• Low forward Voltage Drop.
• High Current Capability.
• High Surge Current Capability.
SMB/DO-214AA
COLOR BAND DENOTES CATHODE
S2A - S2M — General Purpose Rectifiers (Glass Passivated)
August 2011
Absolute Maximum Ratings* T
Symbol Parameter
V
RRM
I
F(AV)
I
FSM
T
STG
T
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V
Average Rectified Forward Current
@ T
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half-Sine-Wave
Storage Temperature Range -65 to +150 °C
Operating Junction Temperature -65 to +150 °C
J
= 25°C unless otherwise noted
A
= 100°C
A
Value
2A 2B 2D 2G 2J 2K 2M
2.0 A
50 A
Units
Thermal Characteristics
Symbol Parameter Value Units
P
R
θJA
* Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics T
Symbol Parameter
V
t
I
C
Power Dissipation 2.35 W
D
Thermal Resistance, Junction to Ambient* 53 °C/W
= 25°C unless otherwise noted
A
Value
2A 2B 2D 2G 2J 2K 2M
Forward Voltage @ 2.0A 1.15 V
F
Reverse Recovery Time
rr
IF = 0.5A, IR = 1.0A, I
Reverse Current @ rated VR TA = 25°C
R
Total Capacitance
T
V
= 4.0V, f = 1.0MHz
R
= 0.25A
rr
TA = 125°C
2.0 μs
1.0
125
30 pF
Units
μA
μA
© 2011 Fairchild Semiconductor Corporation www.fairchildsemi.com
S2A - S2M Rev. C1 1
Typical Performance Characteristics
S2A - S2M — General Purpose Rectifiers (Glass Passivated)
2
[A]
F
1.5
1
RESISTIVE OR
INDUCTIVE LOAD
P.C.B. M O UNTE D
8.0 x 8.0 mm
0.5
COPPER PAD AREAS
0
0 25 50 75 100 125 150 175
Average Rectified Forward Current, I
Ambient Temperature [ºC]
Figure 1. Forward Current Derating Curve
10
[A]
F
1
0.1
Forward Current, I
0.01
0.4 0.6 0.8 1 1.2 1.4 1.6
T = 25 C
º
A
Pulse Width = 300
2% Duty Cycle
Forward Voltage, VF [V]
μμμμ
s
50
[A]
FSM
40
30
20
10
0
Peak Forward Surge Current, I
12 51020 50100
Number of Cycles at 60Hz
Figure 2. Non-Repetitive Surge Current
10
T = 125 C
º
A
1
[uA]
R
0.1
Reverse Current, I
0.01
0 20406080100120140
Percent of Rated Peak Reverse Voltage [%]
º
T = 100 C
A
º
T = 25 C
A
Figure 3. Forward Voltage Characteristics
Figure 4. Reverse Current vs Reverse Voltage
100
50
[pF]
T
20
10
5
2
Total Capacitance, C
1
0.1 0.2 0.5 1 2 5 10 20 50 100
Reverse Voltage, VR [V]
Figure 5. Total Capacitance
© 2011 Fairchild Semiconductor Corporation www.fairchildsemi.com
S2A - S2M Rev. C1 2
TRADEMARKS
®
®
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
2Cool¥
AccuPower¥
Auto-SPM¥
AX-CAP¥*
®
BitSiC
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED
Dual Cool™
EcoSPARK
®
®
EfficientMax¥
ESBC¥
®
Fairchild
Fairchild Semiconductor
FACT Quiet Series¥
®
FACT
®
FAST
FastvCore¥
FETBench¥
FlashWriter
FPS¥
F-PFS¥
FRFET
Global Power Resource
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
®
MillerDrive¥
MotionMax¥
Motion-SPM¥
mWSaver¥
OptoHiT¥
OPTOLOGIC
OPTOPLANAR
*
®
and Better™
®
®
PDP SPM¥
SM
Power-SPM¥
PowerTrench
®
PowerXS™
Programmable Active Droop¥
®
QFET
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success™
®
SPM
STEALTH¥
SuperFET
®
SuperSOT¥-3
SuperSOT¥-6
®
SuperSOT¥-8
SupreMOS
®
SyncFET¥
Sync-Lock™
®
*
The Power Franchise
TinyBoost¥
TinyBuck¥
TinyCalc¥
®
TinyLogic
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
®
TranSiC
TriFault Detect¥
TRUECURRENT
®
*
PSerDes¥
®
UHC
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
XS™
®
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a)
are intended for surgical implant into the body or (b) support or
sustain life, and (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
reasonably expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website,
www.fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substa ndard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or fr om Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date
technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that
may arise. Fairchild will not provide any warranty cov erage or other assistance for parts bought from Unauthorized Sources. Fairchild is comm itted to combat this
global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design
Preliminary First Production
No Identification Needed Full Production
Obsolete Not In Production
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I56
© Fairchild Semiconductor Corporation www.fairchildsemi.com
Loading...