Fairchild FMKA130 service manual

Features
• Compact Surface Mount with J-bend Leads (SMA)
• 1.2 Watt Power Dissipation Package
• 1.0 Ampere, Forward Voltage Less than 600mV
Schottky Rectifier
FMKA130
SMA (DO-214AC)
Color Band Denotes Cathode
Mark: A13
FMKA130
Absolute Maximum Ratings * T
= 25°C unless otherwise noted
A
Symbol Parameter Value Units
V
RRM
I
F(AV)
I
FSM
T
STG
T
J
* These ratings are limiting values above which the serviceability of the diode may be impaired.
Maximum Repetitive Reverse Voltage 30 V Average Rectified Forward Current @ TL = 120°C 1.0 A Non-repetitive Peak Forward Surge Current 30 A Storage Temperature Range -65 to +150 °C Operating Junction Temperature -65 to +125 °C
Thermal Characteristics
Symbol Parameter Value Units
R
θJL
Symbol Parameter Min. Max. Units
V
F
I
R
Thermal Resistance Junctionto Lead
9.6 °C/W
(Half wave, single phase, 60 Hz
=25°C unless otherwise noted
A
Forward Voltage @ IF = 1.0A 550 mV Reverse Leakage VR = 30V
VR = 30V, TA = 100°C
1.0 10
mA mA
©2004 Fairchild Semiconductor Corporation FMKA130, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™
ActiveArray™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™
2
E
CMOS™ EnSigna™ FACT™ FACT Quiet Series™
Across the board. Around the world.™ The Power Franchise Programmable Active Droop™
®
FAST FASTr™ FPS™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™
2
I
C™ i-Lo™ ImpliedDisconnect™
®
ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC
®
OPTOPLANAR™ PACMAN™ POP™
Power247™ PowerSaver™ PowerTrench QFET
®
®
QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ SILENT SWITCHER SMART START™ SPM™ Stealth™
SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UltraFET
®
VCX™
®
®
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In
Design
Preliminary First Production This datasheet contains preliminary data, and
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Obsolete Not In Production This datasheet contains specifications on a product
©2004 Fairchild Semiconductor Corporation
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Semiconductor reserves the right to make changes at any time without notice in order to improve design.
that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I11
Loading...