Fagor Commercial FDD-95S Operators Manual

FAGOR BAR EQUIPMENT SERVICE MANUAL:

TABLE OF CONTENTS

1 RECEIVING AND INSPECTING 2 SPECIFICATIONS

2.1 DIMENSIONS 3 INSTALLATION

3.1 UNCRATING

3.2 CLEANING OF CABINET

3.3 LOCATION

3.3 DATA PLATE

3.4 ELECTRICAL CONNECTIONS

3.5 SHELVING INSTALLATION 4 PERATION

5 TROUBLESHOOTING 6 MAINTENANCE 7 WIRING DIAGRAMS 8 PARTS LISTING

9 WARRANTY

BAR EQUIPAMENT OPERATIOS AND SERVICE MANUAL

2

1 RECEIVING AND INSPECTING Upon receiving your new Fagor Equip, check the package and the

machine for any damages that may have occurred during transportation. Visually inspect the exterior of the package. If damaged, open and inspect the contents with the carrier. Any damage should be noted and reported on the delivering carrier’s receipt.

In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment notify the carrier immediately. Notification should be made verbally as well as in written form. Request an inspection by the shipping company of the damaged equipment. Retain all crating material until inspection has been made. Finally, contact the dealer through which you purchased the unit.

Open the compressor compartment housing and visually inspect package. Be sure lines are secure and base is intact.

BAR EQUIPAMENT OPERATIOS AND SERVICE MANUAL

3