Fagor Commercial CPR-4N Installation Manual
Topping
Manual for installation, use, and maintenance
CPR-60-4
CPR-4N
CPR-4-6L
CPR-8
www.fagorcommercial.com
Page2
Topping: Operations and Service Manual /Rev. Apr.2015
CONTENTS
1 RECEIVING AND INSPECTING THE EQUIPMENT ____________________________ 3
2 SPECIFICATIONS ________________________________________________________ 3
3 DIMENSIONS (MM) ______________________________________________________ 4
4 INSTALLATION __________________________________________________________ 5
4.1 UNCRATING _______________________________________________________ 7
4.2 LOCATION ________________________________________________________ 7
4.3 DATA PLATE ______________________________________________________ 7
4.4 ELECTRICAL CONNECTIONS ________________________________________ 8
5 OPERATION _____________________________________________________________ 8
5.1 TEMPERATURE CONTROL SYSTEM __________________________________ 9
6 MAINTENANCE _________________________________________________________ 11
6.1 CARE AND CLEANING: ____________________________________________ 11
7 WIRING DIAGRAMS _____________________________________________________ 12
8 TROUBLE SHOOTING ___________________________________________________ 14
9 WARRANTY ____________________________________________________________ 15
www.fagorcommercial.com
Page3
Topping: Operations and Service Manual /Rev. Apr.2015
GENERAL SPECS
Model
Amp
HP
Nema Phase
Ref. Amount
Ref. Type
Voltage
CPR-60-4
2.3
1/6
5-15 1 7.4 oz
R-134a
115
CPR-4N
2.1
1/6
5-15 1 7.4 oz
R-134a
115
CPR-4-6L
2.3
1/6
5-15 1 7.4 oz
R-134a
115
CPR-8
2.5
1/6
5/15 1 7.5 Oz
R-134a
115
1 RECEIVING AND INSPECTING THE EQUIPMENT
Upon receiving your new Topping Refrigerator, check the package and the machine for any
damages that may have occurred during transportation. Visually inspect the exterior of the
package, if damaged, open and inspect the contents with the carrier. Any damage should be
noted and reported on the delivering carrier’s receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed damage to
the equipment notify the carrier immediately. Notification should be made verbally as well as in
written form. Request an inspection by the shipping company of the damaged equipment.
Retain all crating material until inspection has been made. Contact the dealer through which
you purchased the unit.
Check the compressor compartment housing and visually inspect the refrigeration package. Be
sure lines are secure and base is still intact.
A NOTE FROM OUR QUALITY CONTROL MANAGER
CONGRATULATIONS ON YOUR NEW PURCHASE. WE WOULD LIKE TO WELCOME YOU TO THE FAGOR TEAM. THE
UNIT IN FRONT OF YOU IS A GREAT PIECE OF EQUIPMENT THAT WILL BECOME ONE OF YOUR MOST RELAIBLE
TOOLS IN YOUR DAILY OPERATIONS FOR YEARS TO COME!
PRIOR TO SHIPPING YOUR UNIT, OUR TRAINED SERVICE TECHNICIANS TESTED YOUR UNIT FOR A PERIOD OF 12
HOURS. THIS PERFORMANCE TEST WAS RECORDED AND A COPY OF THE RESULTS IS INCLUDED WITH THIS
SERVICE MANUAL. DURING THIS TEST, OUR HIGHLY QUALIFIED PERSONNEL INSPECTED YOUR MACHINE FOR
LEAKS, LOSE COMPONENTS, AND IMPROPER NOISE LEVELS. WE ALSO TESTED THE COOLING PERFORMANCE IN AN
EFFORT TO GIVE YOU THE BEST AND MOST RELAIBLE UNIT POSSIBLE.
2 SPECIFICATIONS
www.fagorcommercial.com
Page4
Topping: Operations and Service Manual /Rev. Apr.2015
3 DIMENSIONS
CPR-60-4
CPR-4N
www.fagorcommercial.com
Page5
Topping: Operations and Service Manual /Rev. Apr.2015
CPR-4-6L
www.fagorcommercial.com
Page6
Topping: Operations and Service Manual /Rev. Apr.2015
CPR-8
Loading...