Factory Direct Hardware TEU3UN11 SS User Manual

TEU3UN

High-Effi ciency Urinal EcoPower® Flushometer Valve, 1/8 gpf

FEATURES

• EcoPower® hydropower self-generating system

• Electronic fl ushometer valve complete with 3/4"
angle stop and 3/4" vacuum breaker set

• 1/8 gpf or less

• Back spud - concealed 4" x 4" Cover plate

• 12 hour automatic fl ush for trap seal protection

MODELS

• TEU3UN#SS

Valve only, Surface mount, Satin fi nish

• TEU3UN11#SS (3/4" Vacuum breaker)

Back spud, Satin fi nish

• Complete set supplied with:

Vacuum breaker & angle stop set - VB13RB-11

• 3/4" Angle stop - 10077t6

• 3/4" Vacuum breaker - 10075t6

• Outlet tube - TH559EDV171

• Sweat solder kit - SJ1

• Optional Part:

Z-4000-J - Adapter for ground joint angle stops

COLORS/FINISHES

• #SS Stainless Steel

CODES/STANDARDS (to be listed)

• Meets or exceeds ASSE 1037, CSA B125.3

• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, and others

• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others

• Legislative Compliance: California AB715,
California Green Building Code and others

• ADA compliant

Shall be

WaterSense

certifi ed

PRODUCT SPECIFICATION

TOTO® Model No. _____________________________
Automatic Infrared sensor activated, urinal valve.
4” x 4” cover plate with brushed stainless steel
fi nish. Low water consumption of 1/8 gallons per
fl ush. Stainless steel self-cleaning debris screen and
self-cleaning solenoid. Electrical sensor separated
from valve and sealed in a waterproof compartment.
manual overide button incorporated. Automatic
fl ush every twelve housrs if not used. Angle stop and
vacuum breaker included with accessories.

TEU3UN

High-Effi ciency Urinal EcoPower® Flushometer Valve, 1/8 gpf

SPECIFICATIONS

• Warranty Three Year Warranty

• Material Bronze casting

• Power Supply Hydro-Power Charge

• Water Supply 3/4" NPT

• Detection time Factory setting at six (6)

INSTALLATION NOTES

The recommended installation for the urinal
fl ushometer valve is to have a 7" (178mm) minimum
space in wall. Also a minimum 12” x 12” access
panel or walk-in chase is required for service and
maintainence.

seconds minimum

• Detection range Self-adjusting to environment

• Discharge quantity Preset to 1/8 gpf / 0.47 lpf

• Operating temperature 32°-104°F (0°-40°C)

• Supply water pressure 15 psi - 125 psi*

• Trap seal protection Automatically fl ushes once
after twelve (12) hours

of non-use

These specifi cations are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Check your local plumbing code for details.

DIAGRAM RECOMMENDED INSTALLATION

Dimensions: Inch

Location of the Left water
supply pipe 3/4” NPT

3-3/8”

LOCATION

OVERRIDE BUTTON

Ph: [phone] | Fax: [phone] | www.totousa.com

4-3/4”

1-3/4”

TOTO

EcoPower®

SENSOR

Opening in Wall:

LOCATION

3-15/16” x 3-15/16”

3-15/16”

4-3/4”

Top of the Urinal

Back spud (ø1-5/16”)

4-3/4”* 4-3/4”*

3-15/16”

Location of the

Right water supply

pipe 3/4” NPT

of Supply
and sensor

13-1/2"

(distance from Spud Hole to both

of Supply and Sensor)

*+/- 1/2”

These dimensions and specifi cations are subject to change without notice

Printed in U.S.A. | © TOTO USA 10/11 | Printed on recycled paper ♻

Back Spud 3/4”

Finished wall

Frame

Urinal

3-3/4”

2-3/8”

Supply

13-1/2”

Solder joint

#SS-00625, v.01