Factory Direct Hardware TEU2UN11 SS User Manual
TEU2UN
High-Effi ciency Urinal EcoPower® Flushometer Valve, 1/8 gpf
FEATURES
• EcoPower® hydropower self-generating system
• Electronic fl ushometer valve complete with 3/4"
angle stop and 3/4" vacuum breaker set
• 1/8 gpf or less
• Back spud - concealed 14"x 12" Cover plate
• 12 hour automatic fl ush for trap seal protection
MODELS
• TEU2UN#SS
Vavle only, Surface mount, Satin fi nish
• TEU2UN11#SS (3/4" Vacuum breaker)
Back spud, Satin fi nish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-11
• 3/4" Angle stop - 10077t6
• 3/4" Vacuum breaker - 10075t6
• Outlet tube - TH559EDV171
• Sweat solder kit - SJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel
CODES/STANDARDS (to be listed)
• Meets or exceeds ASSE 1037, CSA B125.3
• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• Legislative Compliance: California AB715,
California Green Building Code and others
• ADA compliant
Shall be
WaterSense
certifi ed
PRODUCT SPECIFICATION
®
TOTO
Automatic infrared sensor activated, urinal fl ush
valve. Heavy-duty 14"x12" stainless steel coverplate
with satin fi nish. Vandal resistant hex head screws.
Automatic sensor adjustment on installation. Manual
override button incorporated. Stainless steel self
cleaning debris screen and solenoid with self cleaning
mechanism. Automatic fl ush every twelve hours if not
used. Angle stop and vacuum breaker included with
accessories. Electrical sensor separated from valve and
sealed in waterproof compartment.
Model No. _____________________________
TEU2UN
High-Effi ciency Urinal EcoPower® Flushometer Valve, 1/8 gpf
SPECIFICATIONS
• Warranty Three Year Warranty
• Material Bronze casting
• Power Supply Hydro-Power Charge
INSTALLATION NOTES
The recommended installation for the urinal
fl ushometer valve is to have a 7" (178mm) minimum
space in wall.
• Water Supply 3/4" NPT
• Detection time Factory setting at six (6)
seconds minimum
• Detection range Self-adjusting to environment
• Discharge quantity Preset to 1/8 gpf / 0.47 lpf
• Operating temperature 32°-104°F (0°-40°C)
• Supply water pressure 15 psi - 125 psi*
• Trap seal protection Automatically fl ushes once
after twelve (12) hours of
non-use
These specifi cations are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Check your local plumbing code for details.
DIAGRAM RECOMMENDED INSTALLATION
Dimensions: Inch
13-1/2”
Opening in wall
4-3/4”*
OVERRIDE
BUTTON
LOCATION
SENSOR
LOCATION
5-1/8”
11-15/16”
Opening in wall
Back spud (ø1-5/16”)
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
3-13/16”
(distance from Spud Hole to both
Top of the Urinal
of Supply
and sensor
13-1/2”
of Supply and Sensor)
*+/- 1/2”
Finished wall
Back Spud 3/4”
2-3/8”
Supply
13-1/2”
Solder joint
Urinal
3-3/4”
These dimensions and specifi cations are subject to change without notice
Printed in U.S.A. | © TOTO USA 10/11 | Printed on recycled paper ♻
#SS-00624, v.01
Loading...