Factory Direct Hardware TEL5LI15 CP User Manual

FEATURES
• Hydropower self-generating system
• Sensor faucet with aerated fl ow
• Spout integrated temperature control with anti-scald design
• Single-hole mount
MODELS
• TEL5LI15#CP - Thermal Mixing
Discharge: On-demand; Up to 15 seconds while activated.
• Optional Accessories:
TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate
TEL5LI
Integrated EcoPower® Faucet
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen
• Meets or exceeds ASME A112.18.1/CSA B125.1, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• California Green Code and City of
Los Angeles Water Effi ciency Ordinance
• ADA compliant
PRODUCT SPECIFICATION
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber. Automatic sensor adjustment on installation. Maximum discharge 0.15 gallon per 15 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. Faucet uses 0.15 gallon/ cycle which is 25% below CALGreen’s baseline.
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
TEL5LI
Integrated EcoPower® Faucet
SPECIFICATIONS
Warranty Three year warranty
Material Bronze with polished chrome fi nish
Power Supply Hydropower self-generating system
Hot/Cold-water Supply Minimum required water pressure: 15PSI
Maximum water pressure:
125PSI*
Water Supply Connect 3/8" Compression
Water Consumption 0.15 gallons per cycle (max);
Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 15 seconds
Detection time ON feature: Immediate
OFF feature: 1 second delay
Detection range Factory set at 2-1/4"
Faucet automatically sets the
detection range according to the size of the basin
Discharge water Thermal Mixing Faucet:
temperature control Cold inlet: 39 - 80°F
range Hot inlet: 120 - 180°F
Adjustable Outlet: 39 - 113°F
(max)
Anti-scald safety Provides the user protection
feature against exposure to
excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO
0.15 gallons of water. This is a 40% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only deliver water as needed and will not run the entire duration of its rated cycle - 15 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
®
faucet with a 15 second cycle uses
6-1/8" (155mm)
5" (127mm)
5-1/16" (129mm)
3-13/16" (97mm)
Maximum deck thickness 2" (50mm)
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
20°
3/8" compression fittings
1-3/8" (35mm)
minimum gap between finished wall and behind the spout
5-15/16" (151mm)
13-13/16" (350mm)
Finished Wall
2-3/16" (56mm)
1-13/16"
2" (50mm) max deck thickness
HOT
These dimensions and specifi cations are subject to change without notice
Printed in U.S.A. | © TOTO USA 09/11 | Printed on recycled paper
(47mm)
1-5/16" (33mm) minimum dia. hole required
temperature mixing lever
1-1/8" (29mm)
COLD
#SS-00623, v.02
Loading...