Factory Direct Hardware SW502 User Manual

FEATURES

• Gentle aerated warm water rinse

• Heated seat with temperature control

• Self-cleaning dual-action spray

• SoftClose® seat

MODELS

• SW502
Elongated only

SW502

Washlet® B100

COLORS/FINISHES

• Standard
#01 Cotton
#12 Sedona Beige

PRODUCT SPECIFICATION

Seat shall be model # SW502______ Seat shall
have gentle aerated warm water rinse with a self­cleaning dual-action spray. Seat shall be heated with
temperature control panel. Seat shall be solid anti­bacterial plastic with closed front seat and cover. Seat
shall include power cord, and water supply hoses.

CODES/STANDARDS

• Meets and exceeds ASME A112.4.2, ASME
A112.18.1/CSA B125.1, UL 1431, CSA C22.2 #68

• Certifi cations: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others

• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others

ELECTRICAL

SW502

SPECIFICATIONS

Washlet® B100

• Power Rating: 120V AC, 60Hz, 313W

• Power Cord: Maximum length: 3.9 ft/120
cm, 3 prong grounded plug

• Water Feature: Adjustable Water Flow Rate:

Front washing - from 9.1 -

19.6 oz/min.
Back washing - from 9.8 -

20.3 oz/min.

• Washing Spray Temp: Minimum: 95˚F/35˚C
Maximum: 104˚F/40˚C

• Water Heater Capacity: 248W

• Water Heater Tank Volume:

0.20 gal./0.78L

• Safety Device: Thermal fuse, bimetal switch
(overheating, auto reset),
fl oat switch (empty tank)

• Back Flow Prevention: Integral backfl ow protection
complies with requirements
in ASSE 1001 as required by
ASME A112.4.2 and ASME
A112.18.1/CSA B125.1

18-7/8” (480mm)

• Seat Warming Feature: Surface Temperature:
Minimum: 86˚F/30˚C
Maximum: 100˚F/38˚C
(W/ Auto Energy Saver
79˚F/26˚C)

• Seat Heater Capacity: 50W

• Safety Device: Thermal fuse

• Water Supply Pressure: Minimum: 7 psi
Maximum: 110 psi

• Ambient Temperature: Range:

33˚F/1˚C to 95˚F/35˚C

• Weight: Net: 10.6 lbs/4.8 kg
Gross: (w/pkg) 17.4lbs/7.9kg

• Product Dimensions: 18-7/8"W x 20.5"D x
6-3/4"H

• Warranty: One Year Limited Warranty

• Shipping weight: 10.6lbs.

• Shipping dimensions: 23" x 20" x 9"

INSTALLATION NOTES

• Washlet B100 may not fi t certain toilet bowl designs.

• If possible, with your order, please include your toilet

manufacturer’s name and model number (from the
underside of the tank lid).

10-7/8” (278mm) 8” (202mm)

5-1/2”

(140mm)

8” (202mm)

15-7/8” (402mm)

Ph: [phone] | Fax: [phone] | www.totousa.com

2-1/2” (62mm)

1-5/8” (62mm)

1-7/8”

11-3/8” (290mm)

2-1/2”

(65mm)

(48mm)

20-1/2” (522mm)

These dimensions and specifi cations are subject to change without notice

# SS-00408 v.01

Printed in U.S.A. | © TOTO USA 07/11 | Printed on recycled paper ♻