Factory Direct Hardware RP291 User Manual
COMPLIES WITH:
Indicates ADA compliance to
CABO/ANSI A117.1-1992
•
ASTM F409 (RP391 Series)
BATH WASTE
DRAINS
■ Trip Lever
■ 17 Gauge Brass (RP691 Series)
■ 20 Gauge Brass (RP291)
■ Polypropylene (RP391 Series)
■ 13 1/2" (343 mm) Maximum
Vertical Adjustment
■ 7 3/4" (197 mm) Maximum
Horizontal Adjustment
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Plated brass overflow plate.
• Gate mechanism shall be a lift and drop
gate operated by a lever mounted on the
overflow plate.
•
All materials in drain line and built-in portion
of fitting shall be resistant to corrosion.
•
Brass construction (RP291 and RP691 series)
or polypropylene construction (RP391 series).
•
Slip joints provided in the drain and
overflow lines.
• Leakage past stopper when closed shall
not exceed one (1) U.S. gallon per hour at
a pressure of six-inch water column.
• All moveable parts must be capable of being
repaired by removing the overflow plate.
• All exposed external surfaces must be
corrosion resistant.
RP291
RP691
RP391
RP391
RP291/RP691
11"–13 1/2"
(279 mm–343 mm)
Vertical Adjustment
6"–7 3/4"
(152 mm–197 mm)
Horizontal Adjustment
2 3/8" (60 mm)
Min. Hole Size for
Overflow Plate
1 5/8" (41 mm)
Min. Hole Size for
Drain Hole
10 1/2"–13"
(267 mm–330 mm)
Vertical Adjustment
6"–7 3/4"
(152 mm–197 mm)
Horizontal Adjustment
2 3/8" (60 mm)
Min. Hole Size for
Overflow Plate
1 5/8" (41 mm)
Min. Hole Size for
Drain Hole
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
9.D.1
DSP-B-RP291 Rev. A
Standard
Features
Brass Overflow Plate ◆◆◆◆◆◆◆
Trip Lever
20 Gauge Brass Construction ◆
17 Gauge Brass Construction ◆◆◆
Polypropylene Construction ◆◆◆
Slip Joints Provided in Drain
and Overflow Lines ◆◆◆◆◆◆◆
10 1/2" (267 mm) to 13" (330 mm)
Vertical Adjustment ◆◆◆
11" (279 mm) to 13 1/2" (343 mm)
Vertical Adjustment ◆◆◆◆
6" (152 mm) to 7 3/4" (197 mm)
Horizontal Adjustment ◆◆◆◆◆◆◆
Chrome Finish ◆◆
Antique Brass Finish ◆
Brilliance ™
Polished Brass Finish
◆◆
White Finish ◆◆
RP291
RP391
RP391PB
RP391WH
RP691AB
RP691PB
RP691WH
Indianapolis, Indiana 46280
A Division of Masco Corporation of Indiana
© 2001 Masco Corporation of Indiana
Loading...