Factory Direct Hardware 83T241 User Manual

Concealed Teck®Flush Valve

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

DSP–83T240

Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.

Engineer/Architect Approval

Model Specified:

Approval: Date:

Approvals:

• CSA certified

• Complies to ASSE 1037

• Oscillating Lever Handle ADA compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force.

• IAPMO Listed

(Contact Delta Representative for State and/or Local Approvals.)

Note: Measurements may vary ± 6mm (0.25'')

Specification: (example) (FOR 1-1/2'' FREE-STANDING, BACK INLET CLOSET FIXTURE)

• Quiet action, TECK®concealed diaphragm flush valve

• Chloramine resistant diaphragm

• Forged brass diaphragm retainer

• Renewable seat

• External water conserving flush volume adjustment,

(except -48 and -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)

• Metal “non hold open” handle actuator

• Vandal resistant handle control can easily be located and installed

anywhere within 6m (20') of flush valve

• Standard flush valve will install on all walls zero to 343mm

(13-1/2'') thick

• 1'' FIP/copper sweat inlet adaptor wheel handle

angle check stop

• Adjustable 121mm (4-3/4'') plus or minus 11mm

(7/16'') inlet/valve outlet centers

• Vacuum breaker

• Wall and spud flanges, concealed sput nut

❏ 83T240

with 16mm (5/8'') dia. push button

❏ 83T241

with oscillating handle

❏ 83T243

with 35mm (1-3/8'') dia. push button

OPTIONS: (Add dash number to end product required above.)

-1 Trap seal primer tee.

-6 Factory set 6 litre

(1.6 US gal.) flush

Not Field Adjustable

-48 Factory set 4.8 litre (1.27 US gal.) flush

Not Field Adjustable

Note: For high and low pressure applications, please see page FEA-81T High Water

Pressure note for more details.

Verify flow requirements with bowl manufacturer.

83T241

-1 OPTION TRAP SEAL PRIMER TEE

DETERGENT/DISINFECTANT

3/8" O.D. Copper Tube

(NOT SUPPLIED)

TO TRAP

SEAL

292mm

(11.5")

254mm

(10")

121mm (4.75")

610mm (24")

OPTIONAL HANDLE LOCATION #2

OPTIONAL HANDLE LOCATION #1

0-343mm (0-13.5")

318mm (12.5")

292mm

(11.5")

610mm (24")

102mm

(4")

121mm (4.75")

TECK

COMMERCIAL