Factory Direct Hardware 81T201HWA User Manual
Electronic Exposed
TECK®Flush Valves
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–81T201HWA
Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.
Engineer/Architect Approval
Model Specified:
Approval: Date:
81T201HWA
Note: Measurements may vary ± 6mm (0.25'')
Note: For high and low pressure applications, please see page FEA-81T
High Water Pressure note for more details.
Verify flow requirements with bowl manufacturer.
Approvals:
•
CSA certified
• Complies to ASSE 1037
•
ADA Compliant and meets Handicapped
Accessibility Standard ASME A117.1 of
less than 5 lbs. operating force.
•
IAPMO listed
(Contact Delta Representative for State
and/or Local Approvals.)
U.S. Patent # 6, 826, 455
Other Patents Pending
060704A 110 to 24VAC Class II 20VA
(for up to 5 Electronic Valves)
060771A 110 to 24VAC Class II 40VA
(up to 10 Electronic Valves)
060772A 110 to 24VAC Class II 100VA
(up to 25 Electronic Valves)
✔ TRANSFORMERS:
81T201HWA
121mm ±13mm
(4.75" ±.44")
71mm
(2.81")
76mm
(3.0")
VACUUM
BREAKER
TUBE
38mm
(1.5")
38mm (1.5")
SLIP JOINT NUT
& WASHERS
SUPPLIED
121mm
(4.76")
292 mm (11.5”)
for 81T201HW
610 mm (24”)
for 81T221HW
54mm
(2.13") MIN.
TOP OF FIXTURE
INLET:
25mm (1.0")
FIP OR
COPPER
SWEAT
W/ADAPTOR
(SUPPLIED)
❏ 81T201HWA
– Exposed Hard Wire Operated
1-1/2'' Top Inlet Closet Fixture
• Polished chrome plated vandal resistant metal cover with top mounted
sensor operated H
2
OPTICS
™
electronics
• Right or left-hand supply installation
• ADA compliant, automatic operation hard wire powered infrared sensor
• Scratch resistant replaceable lens window
• Infrared sensor range adjustment of 610mm-1067mm (24" - 42"), factory set at 34” (
±2")
• Hardwire adaptor 24VAC to 6VDC converter (supplied)
• Vandal resistant copper tube conduit
• Optional dual flush setting capability factory set to OFF (dual flush recommended for 6 litre
(1.6 US gal) models only)
• Optional 24 hour automatic flush factory set to OFF, 3 second flush delay
• Set-up sensor range adjustment indicator lights
• 24 VAC input, 8 second arming delay
• Electronic operated non-hold-open metal manual override button
with 5 second lockout
• (110 to 24 VAC Transformer not included. See selection below for
additional part number.)
• Quiet action, TECK®exposed diaphragm flush valve
• Chloramine resistant diaphragm
• Forged brass diaphragm retainer
• Renewable seat
• Polished chrome plated finish
• External water conserving flush adjustment, factory set at 60 PSI to 6 litre
(1.6 US gal.) (except -48 and -6 models)
• 1" FIP/Copper sweat inlet adaptor, angle check stop with protecting cap
• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve outlet centers
• Vacuum breaker
• Cover tube, stainless steel wall flange, spud flange, concealed spud nut,
and 292mm (11-1/2") outlet tube
❏ 81T201HWA-6
Same as 81T201HWA, but Not Field Adjustable
❏ 81T201HWA-48
Same as 81T201HWA, but factory set at 60 PSI to 4.8 litre (1.27 US gal.),
Not Field Adjustable
❏ 81T221HWA
Same as 81T201HWA, but with 610 mm (24”) outlet tube.
❏ 81T221HWA-6
Same as 81T221HWA, but Not Field Adjustable
❏ 81T221HWA-48
Same as 81T221HWA, but factory set at 60 PSI to 4.8 litre (1.27 US gal.),
Not Field Adjustable
• (110 to 24 VAC Transformer not included. See selection below for
additional part number.)
Electronic Exposed TECK®II
Flush Valve Retrofit Kits
❏ 81T201HWA-20
Same as 81T201HWA, but LESS stop, cover tube and wall flange
❏ 81T201HWA-20-6
Same as 81T201HWA-20, but Not Field Adjustable
❏ 81T201HWA-20-13
Same as 81T201HWA-20, but factory set at 60 PSI to 13 litre (3.4 US gal.)
❏ 81T201HWA-20-48
Same as 81T201HWA-20 but factory set at 60 PSI to 4.8 litre
(1.27 US gal.), Not Field Adjustable
TECK
®
COMMERCIAL
FINISHED
WALL
Stainless Steel
Coverplate
Junction Box
51 x 102mm
(2" x 4")
Loading...