Factory Direct Hardware 81T201-30 User Manual
Exposed Teck®Flush Valves
for Sloan
®
/Zurn®Stops
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–81T201-30
Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.
Engineer/Architect Approval
Model Specified:
Approval: Date:
Note: Measurements may vary ± 6mm (0.25'')
Specification: (example)
(FOR 1-1/2'' TOP INLET CLOSET FIXTURE)
LESS STOP, WITH MODIFIED TAIL TO FIT SLOAN®/ZURN®STOP
• Quiet action, TECK®exposed diaphragm flush valve
• Chloramine resistant diaphragm
• Forged brass diaphragm retainer
• Renewable seat
• Polished chrome plated finish
• External water conserving flush volume adjustment,
(except -48 and -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)
• Vandal resistant cover screw
• Metal “non hold open” handle
• Adjustable 114mm (4.5'') to131mm (5.18'') inlet/valve outlet centers
• Vacuum breaker
• Spud flange and concealed spud nut
WITH 292mm (11-1/2'') LENGTH:
❏ 81T201-30
As above
❏ 81T201-30-6
Same as 81T201-30,
but Not Field Adjustable
❏ 81T201-30-48
Same as 81T201-30, but factory set at
60 PSI to 4.8 litre (1.27 US gal.),
Not Field Adjustable
Approvals:
• CSA certified
• Complies to ASSE 1037
• ADA compliant and meets
Handicapped Accessibility
Standard ASME A117.1 of less
than 5 lbs. operating force.
• IAPMO Listed
(Contact Delta Representative for State
and/or Local Approvals.)
81T201-30
54mm
(2.13”) MIN.
Note: For high and low pressure applications, please see page
FEA-81T High Water Pressure note for more details.
Verify flow requirements with bowl manufacturer.
Items shown outlined by
dotted lines supplied by others.
114mm (4.5")
to 131mm (5.18")
292mm (11.5")
TECK
®
COMMERCIAL
Loading...