Factory Direct Hardware 39850 User Manual

Axor Citterio

39850XX1

Installation Instructions / Warranty

2

Axor Citterio Kitchen Faucet
39850XX1

Technical Data

Operating pressure: max. 145 psi
Recommended operating pressure: 14.5 - 72 psi
Test pressure: 232 psi
Hot water temp.: max. 176° F*
Recommended hot water temp.: 120° - 140° F*
Rate of flow max. 2.2 gpm

*Know and follow all applicable local plumbing codes when setting
the temperature on the water heater.

Do not allow the supply hoses to twist, or
the flow of water will be reduced.

For proper operation of the faucet, the hot supply should be on
the left and the cold supply should be on the right.

3

Installation

Place the faucet on the mounting surface.

If the mounting surface thickness is 1 7/8” or less,
install the plastic washer, friction washer, metal washer
and mounting nut. Tighten the mounting nut. Tighten
the tensioning screws.

plastic washer

friction washer

metal washer

mounting nut

tensioning screws

friction washer

metal washer

mounting nut

tensioning screws

If the mounting surface is 1 7/8” - 2 3/4”, omit the
plastic washer.

Remove the spout set screw.