Factory Direct Hardware 39410 User Manual

Installation Instructions / Warranty

Terrano

37410XX1

Citterio

39410XX1

Uno

38410XX1

Steel

35412801

Axor Tub Spouts

Phoenix / Carlton

17420XX1

Starck

10410XX1

90973301 11/2004

Axor Tub Spouts

Terrano

37410XX1

Phoenix / Carlton

17420XX1

Steel

35412801

Uno

38410XX1

Citterio

39410XX1

Installation Considerations

• These units require a 3/4” female pipe fitting, recessed 3/8” behind the
surface of the finished wall.

• Tools required: 12 mm Hex wrench (not included; available at auto parts
stores); 3 mm Hex wrench (included); waterproof bathroom sealant, Teflon
tape.

2

TM

Installation Instructions

• Seal the wall around the female pipe

fitting using a good quality waterproof
bathroom sealant.

• Wrap the mounting piece clockwise
with 2-3 layers of good quality
plumbers’ thread tape.

• Screw the mounting piece into the pipe
fitting. Tighten with the 12 mm hex
wrench. Do not overtighten! The
mounting piece should extend 1 3/16”

- 1 3/8” outside the surface of the
finished wall.

• Slide the tub spout over the mounting piece until flush with the surface of the
finished wall.

• Secure the tub spout to the mounting piece with the set screw, using the 3 mm
Hex wrench.

3