Factory Direct Hardware 28C4953 User Manual
Model No: 28C4953-AC-R7
SPECIFICATION:
•
203 mm (8") centers cast brass wallmount sink faucet
•
Centers adjustable from 7.75" to 8.25" unless AC option selected
•
Two handle
•
Polished chrome plated finish
•
LESS integral stops
•
CER-TECK® 1/4 turn ceramic disk cartridges
•
Spout: R7 - Gooseneck spout-9.0" radius-12.7" height(unmounted)-
Standard rigid/swivel field installation unless LS Limited swing option
selected-Vandal resistant.090" wall thickness
•
Outlet#: 5 - Vandal Resistant -0.5 USGPM (1.9 L/min) Flow Control Non-
Aerating Spray Outlet
•
Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color
indexed-Vandal Resistant screws
•
(AC)-with 5-1/2" to 10-1/2" Adjustable Centers
COMPLIES WITH:
•
CSA certified.
•
Complies to ASME Standard A112.18.1.
•
IAPMO listed
•
Verified to <0.25% Pb average wetted surface regulations
•
(Contact Delta Representative for State and/or Local Approvals)
•
3 " lever blade handle {ADA}ADA compliant and meets Handicapped
Accessibility Standard ASME A117.1 of less than 5 lbs. operating force
(Dimensional drawing on following page)
•
Not Available
OPERATION:
NOTES:
CA/VT Compliance:
This COMPLETE SERIES is ONLY available as CA/VT Compliant product
as of Nov. 1, 2009.
The Product Numbers have NOT changed.
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Sink Faucet Wallmount
8" Wallmount LESS Integral Check Stops -CERTECK®
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area.
Page of1 2
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030
Model No: 28C4953-AC-R7
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area.
Page of2 2
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030
Loading...