Factory Direct Hardware 27C4934-LS User Manual
Model No: 27C4934-LS
SPECIFICATION:
•
HEAVY DUTY CAST BRASS sink faucet
•
102mm (4") centers, two handle
•
Polished chrome plated finish
•
Metal hold-down package
•
Spout#: 9 - Gooseneck spout-6.0" radius- 10.4" height (unmounted)-
Standard rigid/swivel field installation unless LS Limited swing option
selected- Vandal resistant .090" wall thickness-(R4)
•
Outlet#: 3 - Vandal Resistant Aerator Outlet- 1.5 USGPM (5.7 L/min) Flow
Rate at 60 psi- pressure compensating
•
Handle#: 4 - 102 mm (4") Blade Handles- ADA Compliant-Sanitary Hoods-
Metal-Color indexed-Vandal resistant screws
•
120 degrees limited swing of spout (LS)
COMPLIES WITH:
•
CSA certified.
•
Complies to ASME Standard A112.18.1.
•
IAPMO listed
•
Verified to <0.25% Pb average wetted surface regulations
•
(Contact Delta Representative for State and/or Local Approvals)
•
102 mm (4") Blade Handle ADA compliant and meets Handicapped
Accessibility Standard ASME A117.1 of less than 5 lbs operating force
•
Not Available
OPERATION:
NOTES:
Verified to <0.25% Pb average wetted surface regulations
CA/VT Compliance:
This COMPLETE SERIES is ONLY available as CA/VT Compliant product
as of Nov. 1, 2009.
The Product Numbers have NOT changed.
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Lavatory Faucets
4" deck LESS pop-up - CER-TECK® ceramic
structures
(Dimensional drawing on following page)
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced November 01, 2011.
Page of1 2
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030
Model No: 27C4934-LS
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced November 01, 2011.
Page of2 2
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030
Loading...