Factory Direct Hardware 27C2934-R7 User Manual
000
Engineer/Architect Approval
Model Specified:
Approval: Date:
203mm (8") Wallform
(S2) Swing Spout (2)
203mm (8") Tubular
(S5) Swing Spout (2)
SPOUT OUTLET HANDLE
222
111
333
555
777
999
444
666
888
Five Flute Handles
Vandal Resistant
1.5 USGPM (5.7 L/min.)
Laminar w/Agion
®
Antimicrobial
Vandal Resistant
1.5 USGPM (5.7 L/min.)
Flow Control Aerator
Standard
1.5 USGPM (5.7 L/min.)
Flow Control Aerator
102mm (4")
Hooded Blade
Handles (5)
Smooth End, Laminar
Flow Control in Base
of Gooseneck Spout
1.1 USGPM (4.2L/min.) (3)
Heavy Duty 152mm (6")
Bend Rigid/Swivel (R4)
Gooseneck Spout (1) (4)
✔✔✔
Below Deckmount Sink Faucets
8" Centers
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Page 4.C.3
(1) See Page 9.C.1 for Optional Rigid/Swivel Spouts. These spouts can ONLY be added to SPOUT Option No. 9. Flowrates are at 60 PSI. (4) 120º Limited Swing Spout Available. Add Suffix -LS.
(2) See Page 9.C.2 for Optional Swing Spouts. These spouts can ONLY be added to SPOUT Option No. 2.
(5)
H & C Temperature Indicator Available, Add Suffix -TI.
(3) This outlet can ONLY be added to SPOUT Option No. 9.
Note: Use this page front and back as a product submittal s
heet.
Refer to www.specselect.com for individual models.
Specification: (example)
• Below deckmount sink faucet
• 203mm (8'') centers, two handle
• Polished chrome plated finish trim
• CAST BRASS bodies
• BRASS swing spout or 3/8” IPS BRASS PIPE Rigid/Swivel Gooseneck Spout
• Metal hold-down package
• Color indexed metal handles with vandal resistant screws
and … with … (add CER-TECK®1/4 turn ceramic structures
or TUF-TECK®compression structures)
with … Hose Spray and Diverter (if applicable)
with … (add spout required)
with … (add outlet required)
with … (add handle required)
with … (add suffix -LS if required – See Back Page)
with … (add suffix -TI if required – See Back Page)
76mm (3")
Lever Blade
Handles (5)
102mm (4")
Blade Handles,
Sanitary Hoods (5)
27C2944
27T2944
27C2144
27T2144
152mm (6")
Wrist Handles,
Sanitary Hoods
DESCRIPTION PRODUCT NO.
WITH hose and spray CER-TECK®27C1
LESS hose and spray CER-TECK®27C2
WITH hose and spray TUF-TECK®27T1
LESS hose and spray TUF-TECK®27T2
Below Deckmount Sink Faucets
8" Centers
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–27C/T1 & 2 Rev. A
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Spout “A” “C” “L”
No. SPOUT TYPE mm in. mm in. mm in.
1 8" Wallform Spout (S2) 206 8.1 15 0.6 130 5.1
2 8" Tubular Spout (S5) 185 7.3 41 1.6 147 5.8
See Page 9.C.2 for additional optional spouts.
SWING SPOUT ASSEMBLIES
Approvals:
•
CSA certified
•
Complies to ASME A112.18.1
•
Lever Blade Handles No. 2, 3, 4, and 5,
ADA Compliant and meet Handicapped
Accessibility Standard ASME A117.1
of less than 5 lbs. operating force.
•
IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
FLOWRATE vs PRESSURE
SWING SPOUT
SPRAY
FRONT VIEW
Outlet Flowrates
OUTLET “D”
NO.
mm in.
2 18 0.69
3 18 0.69
4 17 0.67
51mm
(2.0")
97mm
(3.8")
102mm
(4.0")
89mm
(3.5")
32mm
(1.25") MIN.
**3 HOLES
*
203mm
(8.0")
102mm
(4.0")
27mm
(1.06") MAX
44mm
(1.75")
A
L
C
25mm
(1.0")
D
25mm
(1.0") MIN.
DIA. HOLE
(2.0")
51mm
(Extension Kit Available
for up to 11/4'' Thick Decks)
L
C
26mm
(1.01")
(1.75")
44mm
A
Outlet #7Outlets #2, 3, 4
(1.75")
44mm
C
L
D
26mm
(1.01")
A
Note: Measurements may vary ± 6mm (0.25'') INLETS - 1/2'' MIP/Coupling Nuts
GOOSENECK SPOUT ASSEMBLIES
“A”“C”“L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R4) for outlets #2, 3, 4 152 6 124 4.9 146 5.8
Gooseneck–Standard (R4) for outlets #7 152 6 117 4.6 152 6.0
See Page 9.C.1 for additional optional spouts.
GOOSENECK SPOUT
3
4
1
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR
1/2-14 NPSM COUPLING NUT (SUPPLIED)
LIMITED SWING
GOOSENECK
Add suffix “- LS” to Product
Number for 120º Limited Swing
2
5
118mm
(4.7")
152mm
(6.0")
135mm
(5.3")
HANDLE TEMPERATURE
INDICATORS
Add suffix “-TI” to Product Number
for handle temperature indicators
“H” (red), “C” (blue).
Available on handle options 2, 3,
or 4 only.
FLOW
(l/min.)
9
8
7
6
5
4
3
2
1
0
10 20 30 40 50 60 70 80
Line Pr essu re (ps ig)
Spout Outlets
No. 3 & 4 Aerator No. 2 Laminar Flow Outlet
No. 7 Flow Control
FLOW
(USGPM )
2.5
2
1.5
1
.5
00
96mm
53mm
(2.1")
(3.77")
102mm
(4.0")
76mm
(3.0")
73mm
(2.9")
①
63mm
(2.5")
Loading...