Factory Direct Hardware 10010 User Manual
HANSGROHE PRODUCT SERVICE
SINGEL LEVER LAV MIXER
SINGEL LEVER BASIN MIXER
SINGEL LEVER BIDET MIXER
Ref. No.: 10010XX1/10015XX1/10200XX1
10011XX1/10016XX1/10201XX1
Installation
Starck / Starck Puro
Assembly
1. Flush pipe lines thoroughly.
2. Place the mixer including the sealing washer in position on the basin.
3. Slip the fixation piece including the washer over the threaded pin and tighten the nut.
4. Connect the supply pipes to the supply valves: hot-left; cold-right.
5. Connect the pop-up rod to the pop-up waste assembly.
Large differences in pressure between the hot and cold water supply should be balanced.
Operation
The mixer is actuated by pushing the lever head.
Swivel to the left = hot water,
swivel to the rigth = cold water.
Technical data
Lav Mixer 10010XX1
Basin Mixer 10015XX1 Bidet Mixer 10200XX1
Hole size in deck:
Minimum: 1 1/4"
Maximum: 1 5/8"
Lav Mixer 10011XX1
Basin Mixer 10016XX1 Bidet Mixer 10201XX1
11/04
HANSGROHE PRODUCT SERVICE
Spare parts
1
3
1 Flange
2 Handle with cartridge 96231XXX
3 Handle "Puro"
2
4
5
5c
6
7
5b
5a
8
5c
5b
5
5a
4 cartridge 96339000
5 Aerator
3a Aerator casing 10072868
3b Aerator cpl. 30631118
3c Gasket 90328910
6 Lift rod 94006XXX
7 Tube 30668710
8 Fixation cpl. 94701000
XXX = Color code: 000 chrome
Cleaning instructions:
· Clean with a liquid domestic cleaner or with soap suds. Afterwards rinse with clear water and polish with a cloth.
· Do not use any cleaning agents containing acid or scouring agents.
· Damage caused by improper treatment is not subject to our guarantee.
810 satinox
Flow chart
2,5
gpm
2,0
1,5
1,0
0,5
0
0 15 30 45 60 75 psi
Operating pressure : max. 147 psi
Recommended operating press. : 14.7 - 72.5 psi
Test pressure : 232 psi
Hot water temperature : max. 176° F
Recommended hot water temp. : 149° F
11/04
Loading...