Factory Direct Hardware 06476 User Manual

Installation Instructions / Warranty

Raindance

06476XX0

Raindance Showerarm
06476XX0

Installation Considerations

This unit requires a ½" NPT nipple, extending ½"

•
outside the surface of the nished wall.

Installation

Position the showerarm over the nipple.

Mark the positions of the screw holes.

2

Drill the screw holes with a 6 mm bit.

Wrap the threads on the nipple with Teon thread tape.

Seal the wall around the nipple
with waterproof sealant.

Failure to seal the wall can lead
to possible water damage.

Install the anchors.

Seal the wall around the anchors
with waterproof sealant.

Failure to seal the wall can lead
to possible water damage.

Install the showerarm using the screws.

Press the cover into place.

3