LUMASENSE (FRONT)
USER START GUIDE
Charging
1. Make sure light is turned OFF
2. Connect the light to your PC via the USB cable or
charge it via a wall outlet with a 5V USB adaptor (not included).
The light button glows red during charging, and turns off when fully charged.
The on button will glow red to warn you when only 15% of charge remains.
Fully charge
light before
use
What’s in the box?
1x light 1x USB cable 1x mount 1x strap
fabric.cc/user-guides
Charging time: 5hrs
Assembly
The Lumasense is ready to go. To assemble, place the rubber base of the
mount on bar. Attach two ends of the rubber strap to two prongs on side
of mount. Stretch the remaining end of the strap to the remaining prong.
Click the light securely into the rubber mount.
Press
x 1 Turn on / Full power
x 2 Med power / Longer burn time
x 3 Fast flash / Increase burn time
x 4 Flash / Maximum burn time
x 5 Turn off
Battery
indicator
Red indicator on the
rear when battery is
below 15%
Charging Micro USB charging
Charging
indicator
The button glows red
during charging, and
turns off when fully
charged.
Waterproof
level
IPX5
Drop test 1 Metre
Switch On the rear
Certifications CE, ROHS
Warning
Store device in a cool dry place.
Do not shine directly into the eyes.
Keep out of reach of children or pets.
Do not short- circuit the charger or the battery.
Do not use or handle the device while charging.
Never crush or puncture the battery.
Never place the battery or device on, or in, heating units.
Do not dispose of battery or device in a fire.
Fully charge the light/battery before use if not used for over 3 months.
Warranty
Fabric product is covered by a warranty of ONE YEAR commencing at date of purchasing from
an authorized Fabric dealer. This warranty does not cover faults caused by deliberate damage,
violent impact or unauthorized dismantling. Warranty service should only be undertaken by
your retailer and from there, the distributor in your region. If you attempt to repair or modify the
product by yourself, it will not be covered by warranty. Prior to returning, please contact your
Fabric Authorized Service Provider (place of purchase). All returned products must be packed
carefully. Please enclose the warranty certificate (Proof of purchase) together with a detailed
description of your claim.
1
/
2
/
On / Off / Function
3
/
Press
On / Off
Led type White
Output lumen Full -- 30 lumen
Med -- 10 lumen
Fast flash -- 10HZ
Flash -- 3HZ
Light angle 50-60 degrees
Run time Full -- 3.5hrs
Med -- 6hrs
Fast flash -- 8.5hrs
Flash -- 10hrs
Battery type 3.7V, 650 mAh
Lithium polymer
battery
1x light 1x USB cable 1x mount 1x strap
LUMASENSE (REAR)
USER START GUIDE
fabric.cc/user-guides
What’s in the box?
Charging
1. Make sure light is turned OFF
2. Connect the light to your PC via the USB cable or
charge it via a wall outlet with a 5V USB adaptor (not included).
The light button glows red during charging, and turns off when fully charged.
The on button will glow red to warn you when only 15% of charge remains.
Fully charge
light before
use
Charging time: 5hrs
Led type Red
Output lumen Full -- 30 lumen
Med -- 10 lumen
Fast flash -- 10HZ
Flash -- 3HZ
Light angle 50-60 degrees
Run time Full -- 8hrs
Med -- 9 hrs
Fast flash -- 8hrs
Flash -- 9hrs
Battery type 3.7V, 650 mAh
Lithium polymer
battery
Battery
indicator
Red indicator will glow
when battery is below
15%
Charging Micro USB charging
Charging
indicator
The button glows red
during charging, and
turns off when fully
charged.
Waterproof
level
IPX5
Drop test 1 Metre
Switch On the rear
Certifications CE, ROHS
Warning
Store device in a cool dry area.
Do not shine directly into the eyes.
Keep out of reach of children or pets.
Do not short- circuit the charger or the battery.
Do not use or handle the device while charging.
Never crush or puncture the battery.
Never place the battery or device on, or in, heating units.
Do not dispose of battery or device in a fire.
Fully charge the light/battery before use if not used for over 3 months.
Assembly
The Lumasense is ready to go. To assemble, place the rubber base of the
mount on seatpost. Attach two ends of the rubber strap to two prongs on
side of mount. Stretch the remaining end of the strap to the remaining prong.
Click the light securely into the rubber mount.
Warranty
Fabric product is covered by a warranty of ONE YEAR commencing at date of purchasing from
an authorized Fabric dealer. This warranty does not cover faults caused by deliberate damage,
violent impact or unauthorized dismantling. Warranty service should only be undertaken by
your retailer and from there, the distributor in your region. If you attempt to repair or modify the
product by yourself, it will not be covered by warranty. Prior to returning, please contact your
Fabric Authorized Service Provider (place of purchase). All returned products must be packed
carefully. Please enclose the warranty certificate (Proof of purchase) together with a detailed
description of your claim.
On / Off / Function
1
/
3
/
2
/
Press
On / Off
Press
x 1 Turn on / Full power
x 2 Med power / Longer burn time
x 3 Fast flash / Increase burn time
x 4 Flash / Maximum burn time
x 5
Turn off
All riding modes utilise
the accelerometer
brake function.
Loading...