FabiaTech Corporation
IPC Solution
Website: http://www.fabiatech.com
Email: support@fabiatech.com
FD7851 Series
Flat Panel Display
User’s Manual
Part Number: FD7851
JAN 2008
Version: 1.0
Copyright
Copyright © 2008 FabiaTech Corporation, The content of this publication may not
be reproduced in any part or as a whole, transcribed, stored in a retrieval system,
translated into any language, or transcribed in any form or by any means,
electronic, mechanical, and magnetic… or otherwise without the prior written
permission of FabiaTech Corporation.
Disclaimer
FabiaTech makes no r epresentation of warranties with respect to the contents of
this publication. In an effort to continuously improve the product and add features,
FabiaTech reserves the right to revise the publication or change specifications
contained in it from time to time wi thout prior notice of a ny kind from time to time.
FabiaTech shall not be reliable for technical or editorial errors or omissions, which
may occur in this document. FabiaTech shall not be reliable for any indirect,
special, incidental or consequential damages resulting from the furnishing,
performance, or use of this document.
Trademarks
Trademarks, brand names and products names mentioned in this publication are
used for identification purpose only and are the properties of their respective
owners.
Technical Support
If you have problems or difficulties in using the system or setting up the relevant
devices, and software that are not explained in this manual, please contact our
service engineer for service, or send email to support@fabiatech.com
Returning Your Board For Service & Technical Support
If your board requires servicing, contact the dealer from whom you purchased the
product for service information. You can help assure efficient servicing of your
product by following these guidelines:
A list of your name, address, telephone, facsimile number, or email address
where you may be reached during the day
Description of you peripheral attachments
Description of your software (operating system, version, application
software, etc.) and BIOS configuration
Description of the symptoms (Extract wording any message)
For updated BIOS, drivers, manuals, or product information, please visit us at
www.fabiatech.com
.
ii
Table of Contents
User’s Manual............................................................................................................................i
Chapter 1 Introducing the FD7851 Panel Display.................................................................... 1
Overview..................................................................................................................................1
Series Comparison Table.......................................................................................................1
Layout.......................................................................................................................................2
Specifications..........................................................................................................................3
Packing List..............................................................................................................................4
Chapter 2 Hardware Installation ............................................................................................... 5
Before Installation...................................................................................................................5
Keypad (Real View) ...........................................................................................6
Connecting the LCD Monitor to the PC..........................................................9
Connecting the touch screen-Only for FD7851T ...........................................9
Connecting the DC Power and Power Button ..............................................9
Chapter 3 Software Installation ............................................................................................... 11
USB Interface Driver..............................................................................................................11
Driver for WIN2000/XP................................................................................................11
Uninstall Software.......................................................................................................25
Chapter 4 Technical Reference.............................................................................................. 27
Technical Reference............................................................................................................27
Physical and Environmental.....................................................................................27
Compatible VGA Timing Chart ...............................................................................28
Trouble Shooting...................................................................................................................28
Touch Screen..............................................................................................................28
LCD Display is unstable .............................................................................................29
Appendix ...............................................................................................................................30
Dimension ..............................................................................................................................30
Mounting Dimension............................................................................................................32
iii
iv
FabiaTech Corporation
Chapter 1 Introducing the FD7851 Panel Display
Overview
The FD7851x is a 15.0-inch TFT LCD monitor, this panel display with OSD and touch
screen device (FD7851T). This user’s manual provides its outlook information and I/O
outlets description.
Series Comparison Table
Model FD7851 FD7851T
Touch Panel No Yes
Monitor 15.0” XGA Color
Resolution 1024X768
Pitch 0.297x0.297
Response Time 12ms
Brightness 250cd/m2
Contrast Ratio 500:1
LCD Type TFT LCD
Color’s 16.2M
Power DC12V/1.5A
Temperature 0~50℃(32~122℉)
Weight 4.6KG
Dimensions (Unit: mm) 48(D) x 400(W) X 307(H)
1
FabiaTech Corporation
Layout
FD7851(T)
On/Off
DC12V
VGA
Touch Panel
Menu
Auto
2
FabiaTech Corporation
Specifications
FD7851
Front panel with 15.0-inch color TFT LCD panel.
Supports up to XGA 1024X768 16.2M colors
Build-in OSD functions with LED indicator and 5 operation keys.
Touch screen –Only for FD7851T
5-wire analog resistive touch screen device with USB interface.
The USB interface Software support Windows 2000/XP.
Temperature
Operating temperature 0~50℃(32~122℉)
Storage temperature -20~60℃(-4~140℉)
Power requirement –
Power requirement: External 100~240V AC adapter, output +12V DC, 1.5A
maximum.
Dimensions -
FD7851/FD7851T:48.0mm (D) x 400.0mm (W) x 307.0mm (H)
3
FabiaTech Corporation
Packing List
Upon receiving the package, verify the following things. Should any of the
mentioned happens, contact us for immediate service.
• Unpack and inspect the FD7851 package for possible damage that may
occur during the delivery process.
• Verify the accessories in the package according to the packing list and see
if there is anything missing or incorrect package is included.
• If the cable(s) you use to install the FD7851 is not supplied from us, please
make sure the specification of the cable(s) is compatible with the FD7851
system.
Note: after you install the FD7851, it is recommended that you keep the diskette
or CD that contains drivers and document files, and keep the document
copies, or unused cables in the carton for future use.
The following lists the accessories that may be included in your FD7851(T)/package.
Some accessories are optional items that are only shipped upon order.
• One FD7851(T) industrial LCD monitor
• One AC to DC12V power adapter and 1 AC power code.
• One VGA adaptor cable with 1.8M length
• One pack of 6 pair mounting screws
• One touch pen and One USB adapter cable with 1.8M length. (FD7851T only)
• One compact disc includes touch screen driver software.
4
FabiaTech Corporation
Chapter 2 Hardware Installation
This chap ter introduces the system connectors and guides you to app ly them for
field application.
Before Installation
Before you install the system, make sure you follow the following descriptions.
1. Plug the power cable into the AC-DC Power adapter you PC/IPC and LCD
monitor before connecting your LCD monitor to the computer.
2. Turn off you PC/IPC and LCD monitor before connecting your LCD monitor to
the computer.
5
FabiaTech Corporation
Keypad (Real View)
Your LCD monitor allows you to easily adjust the characteristics of the image being
displayed. All of these adjustments are made u sing the contro l buttons on the front
of the monitor. While you use these buttons to adjust the contr ols, an OSD shows
you their numeric values as they change.
On/Off
Menu
Auto
Item Description
1. Turns the Power on or off for the LCD Driver board.
ON/OFF
+ －
MENU
2. Indicates the LED status of the monitor. Green: Normal operation.
Amber: Power saving mode or disconnected signal cable.
1. Moves the selector left or right on the OSD.
2. Increases or decreases the values of the selected function.
1. Turn the OSD menu on.
2. Moves the selector down on the OSD.
1. “Auto” allows the monitor to self-adjust to the incoming video signal
AUTO
in OSD off. The values of fine, coarse and position are adjusted
automatically.
2. Moves the selector up on the OSD.
Out of Scan Range:
If the horizontal or vertical or both input signal frequency exceed the acceptable
input frequency range, the monitor keeps indicating the “OUT OF SCAN RANGE” as
the OSD information after 2 seconds. If both input signal frequencies are in the
acceptable frequency range, the monitor puts out the OSD indi cation and goes
back to normal state. Horizontal frequency: 31 KHz ~ 60KHz. Vertical frequency:
60Hz ~ 75Hz.
6
FabiaTech Corporation
No Input Signal:
If horizontal and vertical input signals are not exist, the monitor displays OSD
information “NO INPUT SIGNAL” 3 seconds, and then goes to power save.
Accessing the menu system
1. With the OSD off, push th e Menu button to display the main OSD menu.
2. Use "MENU/AUTO" buttons to select the function.
3. After selecting a function, use the "UP/DOWN" buttons to make necessary
adjustments. The setting bar moves and the numeric value indicator changes
to reflect your adjustments.
Entry factory mode
1. AC power on.
2. Press power key to power tune off. If power on.
3. Press menu key and don’t release.
4. Press power key to power tune on.
5. Release menu key.
OSD Description :
Auto adjust Auto adjusts H/V position, clock and phase.
Brightness Adjust brightness by inverter.
Contrast Adjust image contrast.
7
FabiaTech Corporation
Clock
Phase
The clock adjustments allow you to coarse tune the image
quality of your monitor to your preference.
The Phase adjustments allow you to fine tune the image
quality of your monitor to your preference.
H-Position Move the image horizontally.
V-Position Move the image vertically.
Reset Recall default data.
Color
temperature
Select color temperature. 1. User: User customizable. 2. 6500K:
Reddish white. 3. 7500K: Plain white. 4. 9300K: Bluish white.
Red Adjust red gain of image.
Green Adjust green gain of image.
Blue Adjust blue gain of image.
Exit OSD Exit main menu.
OSD-H Position Move the OSD Window to the horizontal direction.
OSD-V Position Move the OSD Window to the vertical direction.
OSD Duration
The number of seconds that the OSD will remain visible
before disappearing.
OSD Rotation Right rotate 90°.
OSD Flip Mirror vertical.
OSD Mirror Mirror horizontal.
Auto color Adjust ADC offset and ADC gain to full scale.
Saturation Change the richness of color (sRGB).
Tint Change the tone of color (sRGB).
Sharpness
Adjust the sharpness of video.(Soften more,
Soften…Medium…Sharpen, Sharpen more)
OSD language and appearance can be changed. ENGLISH
Language
/ FRANÇAIS / DEUTSCH / ESPAÑOL / ITALIANO / NEDERLANDS /
PORTUGUÊS.
8
FabiaTech Corporation
Connecting the LCD Monitor to the PC
Connect on end of the VGA signal adaptor cable to the PC’s D-sub 15 VGA port
and other end to the LCD monitor, See following figure and a side pictures.
DB15 Signal
1 Red
2 Green
3 Blue
VGA DC 12V
TouchPanel
13 Hsync
14 Vsync
12 DDC Data
15 DDC Clock
5 & 10 Digital Ground
6,7,8 Analog Ground
Others Not Used
Connecting the touch screen-Only for FD7851T
This touch panel controller provides the optimistic performance of analog resistive
touch panels for 5 wire model. It communicates with PC system directly through
USB connector.
USB Signal
1 USBV
2 USBD-
VGA DC 12V
TouchPanel
3 USBD+
4 USBG
Connecting the DC Power and Power Button
Power is supplied through an external AC/DC power adapter. Check the tec hnical
specification section for information about AC/DC power input voltage. See
following figure and a side pictures.
VGA DC 12V
TouchPanel
DC +12, 1.8A minimum
9
FabiaTech Corporation
10
FabiaTech Corporation
Chapter 3 Software Installation
The enclosed diskette includes FD7851T touch screen driver. To install and configure
you FD7851(T) system, you need to perform the following steps.
USB Interface Driver
Driver for WIN2000/XP
Step 1: To install the Touch Screen driver, insert the CD ROM into the CD ROM
device, and enter DRIVER>TouchScreen>USB>PM6500.
Step 2:
Execute Setup.exe file. Just click [Next >] button to continue installation.
11
FabiaTech Corporation
Step 3: Then A License Agreement appears. Click “I Agree…” and “Next”
Step 4: Windows XP will prompt a warning message before driver certificated.
Now, Press [Continue Anyway] to continue installation.
12
FabiaTech Corporation
Step 5: As the setup is completed, the system will gen erate the message as
follows.
The “InstallShield Wizard Completed” appears. Click “Finish”
13
FabiaTech Corporation
PenMount Control Panel
The functions of the PenMount Control Panel are Device, Calibrate, Setting, Multiple
Monitors ,Tools and About, which are explained in the following sections.
Device
In this window, you can find out that how many devices be detected on your
system.
Calibrate
This function offers two ways to calibrate your touc h screen. ‘Standard Calibration’
adjusts most touch screens. ‘Advanced Calibration’ adjusts aging touch screens.
Standard Calibration
Click this button and arrows appear pointing to red squares. Use your finger or stylus
to touch the red squares in sequence. After the fifth red point calibration is
complete. To skip, press ‘ESC’.
14
FabiaTech Corporation
Advanced Calibration
Advanced Calibration uses 4, 9, 16 or 25 points to effectively calibrate touch panel
linearity of aged touch screens. Click this button and touch the red squares in
sequence with a stylus. To skip, press ESC’.
1. Please select a device then click “Configure”. You can also double click the
device too.
2. Click “Standard Calibration” to start calibration procedure
15
FabiaTech Corporation
NOTE: The older the touch screen, the more Advanced Mode calibration points
you need for an accurate calibration. Use a stylus during Advanced Calibration for
greater accuracy. Please follow the step as below:
3. Come back to “PenMount Control Panel” and select “Tools” then Click
“Advanced Calibration”.
16
FabiaTech Corporation
Select “Device” to calibrate, then you can sta rt to do “Advanced Calibration”.
NOTE: Recommend to use a stylus during Advanced Calibration for greater
accuracy.
Plot Calibration Data
Check this function and a touch panel linearity comparison graph appears when
you have finished Advanced Calibration. The blue lines show linearity before
calibration and black lines show linearity after calibration.
17
FabiaTech Corporation
Turn off EEPROM storage
The function disable for calibration data to write in Controller. The default setting is
Enable
Setting
Touch Mode
This mode enables and disables the mouse’s ability to drag on-screen icons—useful
for configuring POS terminals.
Mouse Emulation – Select this mode and the mouse functions as normal and allows
dragging of icons.
Click on Touch – Select this mode and the mouse only provides a click function,
and dragging is disabled
Beep Sound
Enable Beep Sound – turns beep function on and off
Beep on Pen Down – beep occurs when pen comes down
Beep on Pen Up – beep occurs when pen is lifted up
18
FabiaTech Corporation
Beep on both – beep occurs when comes down and lifted up
Beep Frequency – modifies sound frequency
Beep Duration – modifies sound duration
Cursor Stabilizer
Enable the function support to prevent cursor shake.
Use press and hold as right click
You can set the time out and area for yo u need
About
This panel displays information about the PenMount controller and driver version
19
FabiaTech Corporation
Multiple Monitors
Multiple Monitors supports from two to six touch screen displays for one system. The
PenMount drivers for Windows 2000/XP support Multiple Monitors. This function
supports from two to six touch screen displays for one system. Each monitor requires
its own PenMount touch screen control board, either installed inside the display or in
a central unit. Driver installation procedures are the same as for a single monitor.
Multiple Monitors supports the following modes:
Windows Extend Monitor Function
Matrox DualHead Multi-Screen Function
nVidia nView Function
NOTE: The Multiple Monitors function is for use with multiple displays only. Do not use this
function if you have only one touch screen display. Please note once you turn on this
function the Rotating function is disabled.
Enable the multiple display function as follows:
1. Check the “Multiple Monitor Support” box; then click “Map Touch Screens” to
assign touch controllers to displays.
20
FabiaTech Corporation
2. When the mapping screen message appears, click “OK”
3. Touch each screen as it displays “Please touch this monitor. Press ‘S’ to skip”
Following this sequence and touching each screen is called mapping the touch
screens.
4. After the setting procedure is finished, maybe you need to calibrate for each
panel and controller
21
FabiaTech Corporation
NOTES:
1. If you used a single VGA output for multiple monitors, please do not use the
Multiple Monitors function. Just follow the regular procedure for calibration on each
of your desktop monitors.
2. The Rotating function is disabled if you use the Multiple Monitors function.
3. If you change the resolution of display or screen address, you have to redo Map
Touch Screens so the system understands where the displays are.
4. If you more monitor mapping one touch screen, Please press ‘S’ to skip mapping
step.
Tools
Draw
Tests or demonstrates the PenMount touch screen operation.
Advanced Calibration
Enable Advanced Calibration function
Right Button Icon
Enable right button functio n. The icon can show on Desktop or System Tray (menu
bar).
22
FabiaTech Corporation
Screen Rotation Monitor
The function support nVidia, Intel, SMI or ATI and software such as Portrait Pivot Pro
rotation a utomatic detection.
PenMount Monitor Menu Icon
The PenMount monitor icon (PM) appears in the menu bar of Windows 2000/XP
system when you turn on PenMount Monitor in PenMount Utilities.
PenMount Monitor has the following function
Control Panel
Open Control Panel Windows
Beep
Setting Beep function for each device
Right Button
When you select this function, a mouse icon appears in the right-bottom of the
screen. C lick this icon to switch between Right and Left Button functions.
Exit
Exits the PenMount Monitor function.
23
FabiaTech Corporation
PenMount Rotating Functions
The PenMount driver for Windows 2000/XP supports several display rotating software
packages. Windows 2000/XP support display rotating software packages such as:
• Portrait’s Pivot Screen Rotation Software
• ATI Display Driver Rotate Function
• nVidia Display Driver Rotate Function
• SMI Display Driver Rotate Function
• Intel 845G/GE Display Driver Rotate Function
Configuring the Rotate Function
1. Install the rotation software package.
rd
2. Choose the rotate function (0°, 90°, 180°, 270°) in the 3
party software. The
calibration screen appears automatically. Touch this point and rotation is mapped.
NOTE: The Rotate function is disabled if you use Monitor Mapping
24
FabiaTech Corporation
Uninstall Software
1. Exit the PenMount monitor (PM) in the menu bar in advance.
2. Go to Settings, then Control Panel, and then click “Add/Remove program”
3. Select ”PenMount Universal Driver 1.0”. Click the “Chang/Remove” button
4. Select ‘Yes’ to remove the PenMount driver.
5. Select ‘Yes’ to reboot your system or ‘No’ to reboot your system later.
25
FabiaTech Corporation
26
FabiaTech Corporation
This section outlines the errors that may occur when you operate the system,
and also gives you the suggestions on solving the problems.
Topic include:
Technical Reference
Trouble Shooting for LCD Display and Touch Screen
Chapter 4 Technical Reference
Technical Reference
Physical and Environmental
DC Inputs: 12V/1.8A Minimum
Temperature: Operating 0°C ~ 50°C
Relative humidity 8 % to 85 % non-condensing
Touch screen-knock Test: 35,000,000 times
LCD Lamp Life Time: 20,000 Hr
27
FabiaTech Corporation
Compatible VGA Timing Chart
TYPE RESOLUTION H-FREQUENCY(KHz) V-FREQUENCY (Hz)
FD7851(T)
VESA
Of
VGA
IBM-AT
Trouble Shooting
The following information informs the LCD display and touch serene driver. Please
adjust your systems according to the messages below. Make sure all the
components and connectors are in proper position and firmly attached. If the
errors still exist, please contact with your distributor for maintenance.
640X480
800X600
1024X768
31.5 60.0
37.9 72.0
37.5 75.0
35.1 56.4
37.9 60.0
48.1 72.0
46.9 75.0
48.3 60.0
56.5 70.1
60.0 75.0
Touch Screen
Windows might cause Page Fault blue screen when keep touching the touch
panel during system booting up for USB model.
Workaround:
Do not keep touch the touch panel when system booting up.
USB touch kit driver will not be loaded properly if the panel was kept touched
during system booting up in Windows 2000/XP.
Workaround:
Do not keep touch the touch panel when system booting up.
Check CMOS BIOS setting, the USB Function must enable.
28
FabiaTech Corporation
LCD Display is unstable
There is no display on the LCD Monitor.
Workaround:
Make sure the AC-DC power supply indicator on the LCD and Power LED.
Make system is running on the correct display (VGA or SVGA), Adjustment
KEYPAD (OSD) press “Auto” function.
Connector to the e x te r n a l CRT monitor. If you syste m f u n c ti ons properly with a CRT
monitor but it does not function wi th the LCD monitor, check system BIOS to see if
there is dual (Both) scan for LCD OR CRT only and try again. If these is no display.,
may be problem with you system
29
FabiaTech Corporation
Dimension
FD7851/T
Appendix
Cut out dimension 342 x 265 mm
30
FabiaTech Corporation
On/Off
VGA
DC12V
Touch Panel
Menu
Auto
31
FabiaTech Corporation
Mounting Dimension
WALL
Cut Out Dimensio n = 342 * 26 5 m m
32
Loading...